-1
3210
30
Products: Mechanical & Fluid Systems
POSITAL, a unit of FRABA Inc. (Hamilton, NJ), now offers absolute rotary encoders with a combined interface that enables simultaneous communication of both absolute and incremental rotary position data. The new interface reports...
Products: Electronics & Computers
ICCNexergy (Chicago, IL) has launched a 20-watt desktop power supply line for medical (MWA020) applications. It offers fully regulated DC output in 5V, 9V, 12V, and 24V models. All models feature an LED and are backed by a 5-year...
Products: Medical
The Micro-Twin Screw compounder from Technovel Corporation (Osaka, Japan) offers special capabilities including RPMs up to 4400, high torque drive system, and pressure resistant barrel. The modular screw design can be...
Global Innovations: Imaging
Surgeons use 3D X-rays to check the results before the patient has left the operating room. One issue with currently available 3D X-ray systems, such as C-arms, is that they interfere with the surgeon’s...
Mission Accomplished: Medical
Diseases the affect the back of the eye include age-related macular degeneration (AMD), diabetic retinopathy, and uveitis. Although many therapies exist to treat these...
Features: Materials
Thermoplastic polyurethanes (TPUs) have historically been used as thermoplastic elastomers (TPEs) for medical applications.1 The well-known biocompatibility, biostability,...
Features: Medical
One of the phone calls that product managers fear most is a supplier notifying them that a material used in their product is being discontinued. The impending change forces a litany of...
Features: Medical
Major advances have been made in the past few decades in the percutaneous treatment of artery diseases. The development of each new technology has been spurred by the downfall of the...
Products: Medical
The battery-powered Pro-Driver from Pro-Dex, Inc. (Irvine, CA) offers an alternative to time-consuming and arduous placement of screws and plates in a variety of surgical procedures, such as small bone, neuro,...
Products: Medical
USB Power Sensor
Giga-tronics (San Ramon, CA) offers the GT-8555A 100 MHz to 20 GHz USB Peak Power Sensor, which provides fully calibrated peak and average power measurements, with a high dynamic range and PC-based user interface. The power sensor delivers 20 GHz frequency range, 2,000 readings per second typical, dynamic range of –40 to 20 dBm...
Products: Medical
Excelitas Technologies (Waltham, MA) has released the DigiPile thermopile detector with digital output, combining an MEMS-based sensing element with a fully integrated low noise amplifier, A/D converter, and integrated...
Products: Mechanical & Fluid Systems
The drylin® HTSP-FF leadscrew table from igus (East Providence, RI) includes a quick-release nut that makes format adjustments faster and easier by reducing the number of revolutions required to position the...
Products: Materials
The 211-CTH-SC MD® medical device adhesive from DYMAX (Torrington, CT) is formulated for on-demand cure with the BlueWave® LED Prime UVA spot-curing lamp. It is bright blue in the uncured state, enabling automated...
Products: Medical
Power Technology (Little Rock, AR) has introduced additional blue laser diode wavelengths and power levels. The laser diodes can be installed in an assortment of PTI modules, including laserinduced fluorescence, confocal...
Products: Photonics/Optics
Jenoptik (Jena, Germany) has launched the JenLas® D2.mini 5/8W, a diode-pumped thin-disk laser that provides up to 8 W output for applications in medicine as well as for entertainment. The laser can be used for laser...
Products: Imaging
Interface Catheter Solutions (Laguna Niguel, CA) has introduced the Auto-i 360 balloon visual inspection system with upgrades to reduce cycle times. The new system provides both visual/flaw in spection and...
Products: Software
HKAUTOMATION (Peachtree City, GA), a Hoffman + Krippner company, has introduced industrial panel PCs called flex-IPC®. The line provides a robust enclosure made of zinc-coated stainless steel and a customizable aluminum...
Products: Medical
Mill-Max (Oyster Bay, NY) has added three large-scale, high-current spring pins to its family of ruggedized spring-loaded products. These rugged spring pins are rated at 9 amps and designed with unique termination...
Products: Medical
Accudynamics (Lakeville, MA) offers precision machined base plates for medical diagnostic equipment. They eliminate flexure or unintended movement, which can cause damage to the machine or produce inaccurate test results. The base...
Products: Electronics & Computers
LCR Electronics (Norristown, PA) offers two new series of EMI filters for MRI shielded rooms. The 058 series filters are designed to mitigate any unwanted EMI noise through MRI room telephone, alarm, and data lines. The...
Products: Medical
KNF Neuberger (Trenton, NJ) offers the N0150 diaphragm pump, which can be customized with a water-cooled head to prevent pump overheating in process applications where exothermic reactions from helium, xenon, and other gases may...
Products: Medical
Keystone Electronics (Astoria, NY) offers hardware mounting kits for PC/104 and PC104-Plus Bus Drives for limited space design/installation applications. Each mounting kit includes all the hardware required to mount a...
Products: Medical
Shin-Etsu Silicones of America (Akron, OH) has announced the launch of its HCR (high consistency rubber) product line – Sil-X-Shin™ Silicone Elastomers, which are designed for extruded tubing and profiles. The platinum,...
Products: Medical
Sensortechnics (Walpole, MA) offers the LBA series of differential low-pressure sensors based on thermal mass flow measurement of air through a micro-flow channel integrated within the silicon sensor chip. The sensors are...
Products: Electronics & Computers
The DTM110-C series of medical-certified AC-DC external power supplies from TDK-Lambda (San Diego, CA) offers output power ratings from 90 to 110 watts. Typical operating efficiencies are greater than 85%. Available...
Products: Medical
CILS International (Burlington, MA) has launched a solvent-resistant durable label range that provides lifelong adhesion and product identification when exposed to aggressive chemicals and solvents such as Acetone, MEK, and...
Products: Medical
The new EEPROM (Electrically Erasable Programmable Read-Only Memory) devices from ON Semiconductor (Phoenix, AZ) include the high density 512 kilobit CAT24C512 and 1 megabit CAT24M01, which have a 1.8 to 5.5 V supply voltage...
Global Innovations: Medical
In the future, the success of drug delivery could rely on its ability to integrate with patients’ lives without too much effort. Textiles, which are already a permanent fixture in people’s...
Mission Accomplished: Photonics/Optics
In the 1980s, Jet Propulsion Laboratory (JPL) scientists James Stephens and Charles Miller were studying the harmful properties of light in space, as well as that of artificial radiation...
Top Stories
INSIDER: Medical
Brain Implant Enables Safer Drug Delivery
Features: Medical
Built to Adapt: Rethinking Contract Manufacturing for a New Era
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
From the Editor: Medical
From The Editor: Charting the Technologies That Will Shape Medtech in 2026
Features: Materials
OEM Toll Processing Advances High-Value Products
Podcasts: Medical
Ask the Expert
Dan Sanchez on How to Improve Extruded Components
Improving extruded components requires careful attention to a number of factors, including dimensional tolerance, material selection, and processing. Trelleborg’s Dan Sanchez provides detailed insights into each of these considerations to help you advance your device innovations while reducing costs and speeding time to market.
Webcasts
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Design
Developing Sustainable Drug-Delivery Devices
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
On-Demand Webinars: Medical
Understanding Testing and Compliance Requirements for Wireless Medical Devices
Podcasts: AR/AI
Personalized Medicine and Drug Delivery
Podcasts: Manufacturing & Prototyping
Inside Story
Inside Story: Trends in Packaging and Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.
