-1
1560
30
Products: Medical
Dynamic Inclination Sensor
A dynamic inclination sensor is available from ASM Sensors, Elmhurst, IL. The POSITILT® PTK29 sensor compensates for dynamic influences to give correct values even when in motion. The...
Technology Leaders: Medical
Surface mount solid tantalum capacitors are a well-established technology and have been broadly employed in medical devices for decades. There are many reasons to choose tantalum, including their...
Technology Leaders: Packaging & Sterilization
The market for medical electronics is huge and growing. The astounding capabilities of digital technology and broadband connectivity are “a perfect storm,” enabling doctors to diagnose...
Technology Leaders: RF & Microwave Electronics
Electromagnetic compatibility (EMC) requirements for medical devices and systems is defined by IEC 60601-1-2. The fourth edition implementation of this EMC standard is...
Global Innovations: Medical
Technion-Israel Institute of Technology, Haifa, Israelwww.technion.ac.il
Researchers from the Technion-Israel Institute of Technology and Germany have demonstrated for the first time the...
R&D: Medical
A new test helps quickly identify people who may be infected with the superbug MRSA when admitted to hospital. Currently, when patients are admitted to hospital they are tested for MRSA — a form of...
R&D: Materials
Wet-Tolerant Adhesive Patch Inspired by Octopi
Researchers have developed an artificial, biologically inspired, reversible wet/dry adhesion system that is based on the dome-like protuberances found in the suction cups of octopi. To mimic the architecture of these protuberances, they use a simple, solution-based, air-trap technique that involves...
R&D: Medical
Researchers have developed a new surgical tool that uses low-frequency intravascular ultrasound to break down blood clots that cause deep vein thrombosis. The tool is the first ultrasound...
R&D: Medical
A microhole chip allows single cells to be picked out of the blood sample, placed on separate holes in the substrate for analysis, and removed individually afterwards. A slight underpressure is...
R&D: Medical
A team of researchers is gaining new insight into the smart materials used in ultrasound technology, finding striking similarities with the behavior of water. They investigated a behavior of...
R&D: Medical
Researchers have developed a piezoelectric system that converts the heart’s vibrational energy into electricity to power pacemakers, eliminating the need for batteries. Unlike conventional...
From the Editor: Regulations/Standards
MedAccred Makes Its Mark
The industry was buzzing when Stryker announced in July that it would require its future suppliers of critical manufacturing processes to be accredited by MedAccred, a medical supply chain oversight program formed in 2010 by the Performance Review Institute.
Features: Packaging & Sterilization
As in any industry, new technologies and material choices present new opportunities and challenges for OEMs looking to build brand...
Features: Internet of Things
Cyber threats to health delivery organizations (HDOs) and the medical device industry as a whole have hit a new level of maturity in the last year. A decade ago, the attack scene was...
Features: Medical
Printed circuit boards (PCBs) are critical components in many medical devices. Prior to shipment to the OEM, PCBs must undergo a thorough cleaning process to remove excess solder,...
Features: Connectivity
In the fast-expanding world of wearable medical devices, an entrepreneurial spirit is driving dreams of a digital health future into reality. Collaboration on material...
Features: Medical
Until recently, developers and manufacturers of medical devices have not been required to consider security in their products. New guidance from the U.S. Food and Drug Administration (FDA) and expanded European...
Features: Medical
The use of medical devices has hit an all-time high, with the global industry currently valued at $200 million and strong growth predictions through to 2023.1 These devices include surgical...
Products: Medical
Reflective Optical Sensor
TT Electronics, Woking, UK, has introduced a reflective optical sensor that provides dependable edge and presence detection of reflective media under a wide range of ambient light conditions....
Global Innovations: Medical
Scientists from the Netherlands and Russia have developed a new technology for enhancing the local sensitivity of magnetic resonance imaging (MRI) scanners. The...
From the Editor: Connectivity
Your Cyberattack Wake-Up Call
We’ve been hacked. Forbes reports that the WannaCry ransomware did, in fact, infect a Bayer Medrad radiology power injector in U.S. hospitals. Thankfully, no safety-related functions were affected directly, but what about next time?
R&D: Sensors/Data Acquisition
A small, thin square of an organic plastic that can detect disease markers in breath could soon be the basis of portable, disposable sensor devices. By riddling the thin plastic films with pores,...
R&D: Medical
Scientists have discovered that laser-induced graphene (LIG) is a highly effective antifouling material and, when electrified, bacteria zapper. LIG is a spongy version of...
R&D: Medical
Engineers have developed an imaging technology that could help surgeons removing breast cancer lumps confirm that they have cut out the entire tumor — reducing the need for additional surgeries.
R&D: Medical
A new waterproof motorized wheelchair uses high-pressured air as an energy source instead of heavy batteries and electronics. The chair weighs about 80 lb overall and takes just 10 minutes to...
R&D: Medical
An innovative pad combines both reinforcing pressure and occlusion to treat hypertrophic scars from burns, surgeries, and trauma. The Smart Scar-Care pad showed good performance in reducing...
R&D: Medical
Scientists have created a graphene-based sensor that could lead to earlier detection of looming asthma attacks and improve the management of asthma and other respiratory diseases,...
Features: Medical
Electric servo motors are rapidly replacing mechanical, hydraulic, and pneumatic actuation systems in plastic injection molds, particularly those used in medical cleanrooms,...
Features: Medical
The potential for environmental stress cracking is a common concern when plastics are used in medical devices. According to materials expert Jeffrey Jansen of The Madison Group, environmental stress cracking (ESC) is considered a...
Top Stories
INSIDER: Sensors/Data Acquisition
Tiny Sensor Could Transform Head Injury Detection
News: Robotics, Automation & Control
Quantum Surgical Acquires NeuWave Medical, Inc.
Briefs: Materials
Shrinking Materials Hold Big Potential for Smart Devices
Podcasts: Medical
The Hidden Nervous System of Surgical Robotics: Power, Data & Sensing...
Briefs: Medical
Specialty Thermoplastics for Medical Tubing Address PFAS, Processing, and...
Podcasts: Medical
Ask the Expert
Ralph Bright on the Power of Power Cords
Understanding power system components and how to connect them correctly is critical to meeting regulatory requirements and designing successful electrical products for worldwide markets. Interpower’s Ralph Bright defines these requirements and explains how to know which cord to select for your application.
Webcasts
Podcasts: Design
The Hidden Nervous System of Surgical Robotics: Power, Data & Sensing Behind...
Podcasts: Medical
Surgical & Assistive Robotics: Redefining Human Capability
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Design
Developing Sustainable Drug-Delivery Devices
Podcasts: Medical
Smarter Pathways for Precision Drug Delivery in Cancer Care
On-Demand Webinars: Manufacturing & Prototyping
Understanding Testing and Compliance Requirements for Wireless Medical Devices
Inside Story
Inside Story: Trends in Packaging and Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.
