Stories

0
6720
30
Products: Medical
The drylin® HTSP-FF leadscrew table from igus (East Providence, RI) includes a quick-release nut that makes format adjustments faster and easier by reducing the number of revolutions required to position the...
Feature Image
Products: Materials
The 211-CTH-SC MD® medical device adhesive from DYMAX (Torrington, CT) is formulated for on-demand cure with the BlueWave® LED Prime UVA spot-curing lamp. It is bright blue in the uncured state, enabling automated...
Feature Image
Products: Robotics, Automation & Control
The battery-powered Pro-Driver from Pro-Dex, Inc. (Irvine, CA) offers an alternative to time-consuming and arduous placement of screws and plates in a variety of surgical procedures, such as small bone, neuro,...
Feature Image
Products: Medical
Power Technology (Little Rock, AR) has introduced additional blue laser diode wavelengths and power levels. The laser diodes can be installed in an assortment of PTI modules, including laserinduced fluorescence, confocal...
Feature Image
Products: Medical
Jenoptik (Jena, Germany) has launched the JenLas® D2.mini 5/8W, a diode-pumped thin-disk laser that provides up to 8 W output for applications in medicine as well as for entertainment. The laser can be used for laser...
Feature Image
Products: Imaging
Interface Catheter Solutions (Laguna Niguel, CA) has introduced the Auto-i 360 balloon visual inspection system with upgrades to reduce cycle times. The new system provides both visual/flaw in spection and...
Feature Image
Products: Medical
HKAUTOMATION (Peachtree City, GA), a Hoffman + Krippner company, has introduced industrial panel PCs called flex-IPC®. The line provides a robust enclosure made of zinc-coated stainless steel and a customizable aluminum...
Feature Image
Products: Mechanical & Fluid Systems
Mill-Max (Oyster Bay, NY) has added three large-scale, high-current spring pins to its family of ruggedized spring-loaded products. These rugged spring pins are rated at 9 amps and designed with unique termination...
Feature Image
Products: Medical
Accudynamics (Lakeville, MA) offers precision machined base plates for medical diagnostic equipment. They eliminate flexure or unintended movement, which can cause damage to the machine or produce inaccurate test results. The base...
Feature Image
Products: Electronics & Computers
LCR Electronics (Norristown, PA) offers two new series of EMI filters for MRI shielded rooms. The 058 series filters are designed to mitigate any unwanted EMI noise through MRI room telephone, alarm, and data lines. The...
Feature Image
Products: Medical
KNF Neuberger (Trenton, NJ) offers the N0150 diaphragm pump, which can be customized with a water-cooled head to prevent pump overheating in process applications where exothermic reactions from helium, xenon, and other gases may...
Feature Image
Products: Medical
Keystone Electronics (Astoria, NY) offers hardware mounting kits for PC/104 and PC104-Plus Bus Drives for limited space design/installation applications. Each mounting kit includes all the hardware required to mount a...
Feature Image
Products: Materials
Shin-Etsu Silicones of America (Akron, OH) has announced the launch of its HCR (high consistency rubber) product line – Sil-X-Shin™ Silicone Elastomers, which are designed for extruded tubing and profiles. The platinum,...
Feature Image
Products: Sensors/Data Acquisition
Sensortechnics (Walpole, MA) offers the LBA series of differential low-pressure sensors based on thermal mass flow measurement of air through a micro-flow channel integrated within the silicon sensor chip. The sensors are...
Feature Image
Products: Medical
USB Power Sensor
Giga-tronics (San Ramon, CA) offers the GT-8555A 100 MHz to 20 GHz USB Peak Power Sensor, which provides fully calibrated peak and average power measurements, with a high dynamic range and PC-based user interface. The power sensor delivers 20 GHz frequency range, 2,000 readings per second typical, dynamic range of –40 to 20 dBm...
Products: Medical
The DTM110-C series of medical-certified AC-DC external power supplies from TDK-Lambda (San Diego, CA) offers output power ratings from 90 to 110 watts. Typical operating efficiencies are greater than 85%. Available...
Feature Image
Products: Medical
CILS International (Burlington, MA) has launched a solvent-resistant durable label range that provides lifelong adhesion and product identification when exposed to aggressive chemicals and solvents such as Acetone, MEK, and...
Feature Image
Products: Medical
The new EEPROM (Electrically Erasable Programmable Read-Only Memory) devices from ON Semiconductor (Phoenix, AZ) include the high density 512 kilobit CAT24C512 and 1 megabit CAT24M01, which have a 1.8 to 5.5 V supply voltage...
Feature Image
INSIDER: Regulations/Standards
FDA and Stanford Tackle Med-Tech Education
Since it was established 11 years ago, the Stanford Biodesign Innovation Program has led to more than 200 patents and 24 start-up companies, including Spiracur, the company behind the SNaP Wound Care System (featured in the January issue of Medical Design Briefs). This intensive one-year program helps...
News: Medical
Portable, Wearable System Improves Prosthesis Fitting, Design
If a prosthesis is not fit or aligned correctly, it can affect a patient's walking patterns, resulting in an asymmetric gait. These abnormal gait patterns can increase the stress on the healthy limb, leading to problems later in life such as arthritis. Researchers at Oak Ridge National...
INSIDER: Medical
T-Rays Take Medical Scanning Gadgets to the Next Level
Researchers have made T-rays into a much stronger directional beam than was previously thought possible — and have done so at room-temperature conditions. This is a breakthrough that should allow future T-ray systems to be smaller, more portable, easier to operate, and much cheaper than...
INSIDER: Medical
Could a Saliva-Based Biochip Lick the Competition?
The process of monitoring blood glucose levels through finger pricking is an inconvenience at best for the estimated 26 million diabetics in the U.S. It's no mystery why researchers have continued to set their sights on developing more convenient and less invasive methods of monitoring glucose...
INSIDER: Medical
What's the Skinny on Teledermatology?
From delivering care to the developing world, to remote echocardiography, to hearing assessment, telemedicine has opened doors to new and potentially improved forms of diagnosis and treatment. Dermatology is one area in particular that stands to benefit greatly from this technology.
INSIDER: Design
Open-Source Opens Doors for Surgical Robots
Raven II, a robotic surgery system developed at UC Santa Cruz and the University of Washington, is being shared on an open-source basis with five other universities. Researchers hope that this will enable users to share software, replicate experiments, and collaborate in other ways — and ultimately...
INSIDER: Medical
Natural User Interface Technologies
A Microsoft Research Connections project proposes to develop a contact lens that monitors blood glucose levels for type 1 diabetes patients. Other non-invasive alternatives to the finger-pricking method have also been explored elsewhere — such as this tear-based glucose sensor from Arizona State University,...
INSIDER: Medical
Lending a Hand to Hip Implants
The road to better, longer-lasting hip implants may be paved with better lubricants. A team of engineers and physicians recently discovered that graphitic carbon is a key element in a lubricating layer for longer-lasting metal-on-metal hip implants. The ability to extend the life of implants would have enormous...
INSIDER: Medical
New Bandage Spurs, Guides Blood Vessel Growth
Engineers at the University of Illinois have developed a bandage that stimulates and directs blood vessel growth on the surface of a wound. The bandage, called a “microvascular stamp,” contains living cells that deliver growth factors to damaged tissues in a defined pattern. The new approach is the...
Briefs: Materials
An aging population and accompanying demand for wound dressing and stoma care technologies that provide better treatment than conventional techniques have prompted the medical adhesives industry to produce a new...
Feature Image

Ask the Expert

Ralph Bright on the Power of Power Cords
Feature Image

Understanding power system components and how to connect them correctly is critical to meeting regulatory requirements and designing successful electrical products for worldwide markets. Interpower’s Ralph Bright defines these requirements and explains how to know which cord to select for your application.

Inside Story

Inside Story: Trends in Packaging and Sterilization
Feature Image

Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.

Videos