Topic

Originally developed and marketed as an extension pole for painting, light bulb changing, and similar operations, the single-motion extension principle in this technology is adaptable to any rod or pole that must be extended and retracted to a compact length. It applies to extendable antennae; tent poles;...

This technology sterilizes air, eliminating odors, preventing infections, and extending the shelf life of food. The scalable system results in 100% removal of microorganisms with one passthrough of air. The technology has optimized UV exposure with a...

A company seeks a printing capability and/or technology that creates a physical 3D texture that is tactile and soft (but not rubbery) in nature onto a flat or curved plastic surface made of polyethylene, polypropylene, or polyester material. This 3D printing enhances the product experience for the consumer by...

A company seeks to increase the viscosity of brine solutions containing both mono and multivalent salts. Targeted brines may contain up to 80% weight of salt. Viscosity must stay the same up to 150°C. The thickened brine should have a yield value of the order of 1Pa (or higher) and a shear thinning behavior. The...

In this protocol and packet format, data traffic is monitored by all network interfaces to determine the health of transmitter and subsystems. When failures are detected, the network interface applies its recovery policies to provide continued service despite the presence...

A compact, ambulatory biometric data acquisition system has been developed for space and commercial terrestrial use. BioWATCH (Bio medical Wireless and Ambulatory Telemetry for Crew Health) acquires signals from bio-medical sensors using acquisition modules attached to a common data and power bus. Several...

Three methods have been proposed to be developed to enable reduction of the types of interference that often occur among voice-communication radio signals involved in air-traffic control (ATC). For historical reasons and for compatibility with some navigation systems, control towers and aircraft use...

A computer program performs level- 1B processing (the term “1B” is explained below) of data from observations of the limb of the Earth by the Earth Observing System (EOS) Microwave Limb Sounder (MLS), which is an instrument aboard the Aura spacecraft. This software accepts, as input, the raw EOS MLS...

Auto-Generated Semantic Processing (AGSP) Services is a suite of software tools for automated generation of other computer programs, denoted cross-platform semantic adapters, that support interoperability of computer-based communication systems that utilize a variety of both new and legacy communication...

A software package that has been designed to allow authentication for determining if the rover(s) is/are within a set of boundaries or a specific area to access critical geospatial information by using GPS signal structures as a means to authenticate mobile devices into a network wirelessly and in real-time has been...

The Maneuver Automation Software (MAS) automates the process of generating commands for maneuvers to keep the spacecraft of the Cassini-Huygens mission on a predetermined prime mission trajectory. Before MAS became available, a team of approximately 10 members had to work about two weeks to design, test, and implement...

Event Driven Messaging with Role-Based Subscriptions (EDM-RBS) is a framework integrated into the Service Management Database (SMDB) to allow for role-based and subscription-based delivery of synchronous and asynchronous messages over JMS (Java Messaging Service), SMTP (Simple Mail Transfer...

A computer program estimates the relative position and orientation of two structures from measurements, made by use of electronic cameras and laser range finders on one structure, of distances and angular positions of fiducial objects on the other structure. The program was written...

A process has been developed for fabricating membranes of a perfluoropolyether (PFPE) and integrating them into valves and pumps in “laboratory-on-a-chip” microfluidic devices. Membranes of poly(tetrafluoroethylene) [PTFE] and poly(dimethylsilane) [PDMS] have been considered for this...

A process has been developed for fabricating perfluoropolyether (PFPE) membranes that contain microscopic holes of precise sizes at precise locations. The membranes are to be incorporated into “laboratory-on-a-chip” microfluidic devices to be used in performing capillary electrophoresis.

A mechanical fitting and relatively simple and safe method of installing it on the metal case of a battery have been devised to provide access to the interior of the battery to perform inspection and/or to measure such internal conditions as temperature and pressure. A metal boss or stud having an...