Topic

Stories

0
29580
30
Briefs: Information Technology
Calculation of Operations Efficiency Factors for Mars Surface Missions
For planning of Mars surface missions, to be operated on a sol-by-sol basis by a team on Earth (where a “sol” is a Martian day), activities are described in terms of “sol types” that are strung together to build a surface mission scenario. Some sol types require ground...
Briefs: Information Technology
Fuzzy Neuron: Method and Hardware Realization
Simple and effective learning functions and adaptive elements can be placed into small hardware systems to include instruments for space, bioimplantable devices, and stochastic observers.
Briefs: Information Technology
Frequency-Modulated, Continuous-Wave Laser Ranging Using Photon-Counting Detectors
Optical ranging is a problem of estimating the round-trip flight time of a phase- or amplitude-modulated optical beam that reflects off of a target. Frequency-modulated, continuous-wave (FMCW) ranging systems obtain this estimate by performing an interferometric...
Briefs: Information Technology
Robust, Optimal Subsonic Airfoil Shapes
A method has been developed to create an airfoil robust enough to operate satisfactorily in different environments. This method determines a robust, optimal, subsonic airfoil shape, beginning with an arbitrary initial airfoil shape, and imposes the necessary constraints on the design. Also, this method is...
Briefs: Information Technology
Temperature Dependences of Mechanisms Responsible for the Water-Vapor Continuum Absorption
The water-vapor continuum absorption plays an important role in the radiative balance in the Earth’s atmosphere. It has been experimentally shown that for ambient atmospheric conditions, the continuum absorption scales quadratically with the H2O number...
Briefs: Information Technology
Kalman Filter Input Processor for Boresight Calibration
Ka-band ranging provides the phase center (PC) to phase center range, which needs to be converted to the center of mass (CM) to center of mass range. Nominally, both PC and CM lie on the line connecting the spacecraft GRAIL A and GRAIL B. In this case, the conversion should be done simply by...
Briefs: Information Technology
Organizing Compression of Hyperspectral Imagery to Allow Efficient Parallel Decompression
A family of schemes has been devised for organizing the output of an algorithm for predictive data compression of hyperspectral imagery so as to allow efficient parallelization in both the compressor and decompressor. In these schemes, the compressor performs...
Briefs: Information Technology
Protograph-Based Raptor-Like Codes
Theoretical analysis has long indicated that feedback improves the error exponent but not the capacity of point-to-point memoryless channels. The analytic and empirical results indicate that at short blocklength regime, practical rate-compatible punctured convolutional (RCPC) codes achieve low latency with the...
From the Editor: Medical
From the Editor — The Future Is Here
About a month ago, I had a chance to watch the award-winning documentary “The Incredible Bionic Man,” built entirely of prosthetic parts and implantable synthetic organs by leading scientists and roboticists, and hosted by the Smithsonian Channel. I was transported a future that was barely envisioned by...
Features: Medical
Medical devices manufactured today require significant attention to safety and human factors engineering that has not always been exercised in medical device design. IEC safety...
Feature Image
Features: Medical
The cardiovascular device market is growing, with research forecasting that the cardiac implant medical device market alone will exceed $27 billion by...
Feature Image
R&D: Medical
Biosensor Could Help Detect Brain Injuries During Heart Surgery A team of engineers and cardiology experts at Johns Hopkins School of Medicine and Children’s Center have teamed up to develop a biosensor that could...
Feature Image
Global Innovations: Electronics & Computers
KTH Royal Institute of Technology, Stockholm, Sweden, http://www.kth.se/en A specially-designed elastic bodysuit covered with electrodes, which was designed at Stockholm’s KTH Royal...
Feature Image
Mission Accomplished: Medical
The future looks bright, light, and green—especially where aircraft are concerned. The division of NASA’s Fundamental Aeronautics Program called the Subsonic Fixed Wing Project is aiming to...
Feature Image
Technology Leaders: Materials
We’ve all learned in Wire & Cable 101 that poly(vinyl chloride) (PVC) reigns supreme for its low cost, high temperature ranges, and multipurpose...
Feature Image
Technology Leaders: Medical
Every day, medical device manufacturers are getting better and better at managing risk. They know they have to. Changes have been introduced into international regulatory schemes that impact device design all...
Feature Image
Products: Materials
Arkema Inc., King of Prussia, PA, introduces Kynar Rx® 752 polyvinylidene fluoride (PVDF) copolymer for use in minimally invasive medical catheters exposed to bodily fluids for fewer...
Feature Image
Products: Energy
Linear Technology Corpora tion, Milpitas, CA, announces the LTC2943 multicell battery gas gauge, which makes direct measurements of 3.6V to 20V battery stacks. The LTC2943 is a true high voltage gas gauge that measures charge,...
Feature Image
Products: Electronics & Computers
Coilcraft CPS, Cary, IL, has released its new AE425PJB Series of low-profile power inductors that are just 1.8mm high with a footprint of 3.9mm square. It features a special suspended core construction, making...
Feature Image
Products: Materials
Master Bond Inc., Hackensack, NJ, formulated EP79FL with a silver- coated nickel filler, as a twopart, electrically conductive epoxy for bonding, sealing, and coating applications. It has low volume...
Feature Image
Products: Medical
Spellman High Voltage Electronics Corporation, Valhalla, NY, introduces X-Ray sub-systems, featuring its industry leading XRV high voltage generators, available in unipolar and bipolar, 160 to 450kV, 1.8-6kW. Combining the...
Feature Image
Products: Manufacturing & Prototyping
Stackpole Electronics Inc., Raleigh, NC, announces that its surface mount metal film MELFs, the MLF and MLFM Series offers cooler operating temperatures at full rated power. The cylindrical shape provides a termination that...
Feature Image
Products: Mechanical & Fluid Systems
Thomas Division, Sheboygan, WI, announces that its Model 1420 miniature diaphragm pump with an innovative twin-head design achieves higher flows than conventional standard diaphragm pumps of the same physical...
Feature Image
Products: Motion Control
Zero-Max, Inc., Plymouth, MN, precision machined ServoClass couplings are available with hub taper adapters for use on servo motors with tapered shafts in high speed applications. The hub adapters fit precisely in the...
Feature Image
Products: Manufacturing & Prototyping
Amacoil, Inc., Aston, PA, released a linear speed control option for Model RG rolling ring linear drives that lets users fix a specific speed in one or both directions. Medical equipment designers may use...
Feature Image
What's Online: Manufacturing & Prototyping
Fiat S.p.A. on Jan. 1 announced an agreement under which its wholly owned subsidiary Fiat North America LLC will acquire 100% ownership of Chrysler Group LLC by month’s end. Fiat currently own...
Feature Image
Products: Medical
KD Scientific, Holliston, MA, introduces its new Allegro Peristaltic Pump System, the only touch screen peristaltic pump that displays flow rate, dispensed volume, and flow direction. This innovative new pumping...
Feature Image

Ask the Expert

Eric Dietsch on the Benefits of Nitinol Wire
Feature Image

In collaboration with the Fort Wayne Metals Engineering team, Eric Dietsch focuses on supporting customers with material recommendations, product development, and education. Eric is available to help you and your company with any Nitinol-related questions or needs that you may have.

Inside Story

Inside Story: Trends in Packaging and Sterilization
Feature Image

Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.