Briefs: Mechanical & Fluid Systems
A multiple-throat venturi system has been invented for measuring laminar flow of air or other gas at low speed (1 to 30 cm/s) in a duct while preserving the laminar nature of the flow and keeping...
Briefs: Physical Sciences
An instrumentation system for direct measurement of the thermal conductivity of a small sample of a highly insulating material has been devised. As used here, (1) “small” signifies...
Briefs: Physical Sciences
An alignment jig (see figure) places a THz horn and power detector at the proper locations with respect to the focal points of a conic reflector in order to couple total power of the...
Briefs: Mechanical & Fluid Systems
The autoignition chamber (AIC) performs by remotely heating pyrotechnic devices that can fit the inner diameter of the tube furnace. Two methods, a cold start or a hot start, can be used with this device in autoignition testing of pyrotechnics. A cold start means extending a pyro -...
Briefs: Semiconductors & ICs
Modules containing multiple monolithic microwave integrated-circuit (MMIC) chips have been built as prototypes of transmitting/receiving (T/R) modules for millimeter-wavelength radar systems, including...
Briefs: Semiconductors & ICs
Two developments improve the utilization of flash memory devices in the face of the following limitations: (1) a flash write element (page) differs in size from a flash erase element (block), (2) a block must be erased before its is rewritten, (3) lifetime of a flash memory is typically...
Briefs: Semiconductors & ICs
A miniaturized instrumentation package comprising a (1) Global Positioning System (GPS) receiver, (2) an inertial measurement unit (IMU) consisting largely of surface-micromachined sensors of the microelectro-mechanical systems (MEMS) type, and (3) a microprocessor, all residing on a single circuit...
Briefs: Electronics & Computers
A modulator circuit board has recently been developed to be used in conjunction with a vector modulator to generate any of a large number of modulations for bandwidth-efficient radio...
Briefs: Electronics & Computers
Schemes for combining power from coherent microwave sources of arbitrary (unequal or equal) amplitude have been proposed. Most prior microwave-power-combining schemes are limited to...
Briefs: Electronics & Computers
A system that includes a Global Positioning System (GPS) antenna and associated apparatus for keeping the antenna aimed upward has been developed for use aboard a...
Briefs: Mechanical & Fluid Systems
The Rock Baller is a sample acquisition tool that improves sample retention. The basic elements of the Rock Baller are the tool rotation axis, the hub, the two jaws, and the cutting blades, which are located on each of the jaws. The entire device rotates about the tool rotation axis, which is aligned...
Briefs: Mechanical & Fluid Systems
Haptic interfaces in the form of arrays of balloonlike pneumatic actuators are being developed to provide tactile feedback from (1) remote-manipulator hands, tools on the tips of robot arms, and other, similar...
Briefs: Mechanical & Fluid Systems
The cryogenic feedthrough test rig (CFTR) allows testing of instrumentation feedthroughs at liquid oxygen and liquid hydrogen temperature and pressure extremes (dangerous process fluid) without actually exposing the feedthrough to a combustible or explosive process fluid. In addition, the helium used (inert gas), with...
Briefs: Manufacturing & Prototyping
A two-step plasma process has been developed as a means of removing surface oxide layers from indium bumps used in flip-chip hybridization (bump bonding) of integrated circuits. This...
Briefs: Manufacturing & Prototyping
A hand tool has been developed for crimping leads in flexible tails that are parts of some electronic circuits — especially some sensor circuits. The tool is used to cut the tails to desired lengths and attach solder tabs to the leads. For tailoring small numbers of circuits for special applications, this...
Briefs: Manufacturing & Prototyping
An improved assembly for inert-gas shielding of a metallic joint is designed to be useable during any of a variety of both laser-based and traditional welding and brazing processes....
Briefs: Materials
Composites of specific types of polymer foams and aerogel particles or blankets have been proposed to obtain thermal insulation performance superior to those of the neat polyimide foams. These composites have potential to also provide enhanced properties for vibration dampening or acoustic...
Briefs: Materials
Yb14MnSb11 has been found to be well-suited for use as a p-type thermoelectric material in applications that involve hot-side temperatures in the approximate range of 1,200 to...
Briefs: Software
A computer program converts, into a format suitable for processing on Earth, files of downlinked telemetric data pertaining to the operation of the Instrument Deployment Device (IDD), which is a robot arm on either of the Mars Explorer Rovers (MERs). The raw downlinked data files are in comma-separated-value...
Briefs: Software
This data- and event-driven persistent storage system leverages the use of commercial software provided by Oracle for portability, ease of maintenance, scalability, and ease of integration with embedded, client-server, and multi-tiered applications. In this role, the Service Management Database (SMDB)...
Briefs: Physical Sciences
At NASA, hydrogen safety is a key concern for space shuttle processing. Leaks of any level must be quickly recognized and addressed due to hydrogen’s lower explosion limit. Chemochromic devices have been developed to detect hydrogen gas in several embodiments. Because hydrogen is odorless and colorless and...
Briefs: Physical Sciences
A method of calculating (usually for the purpose of maximizing) the power-conversion efficiency of a segmented thermoelectric generator is based on equations derived from the fundamental...
Briefs: Physical Sciences
A probe was designed to investigate the moulins (melt water drainage channels on an ice cap) and ice-hydrology interaction in the Greenland Ice Cap. By using commercially available components, the strong and reliable system has been developed that has a high-definition video recording element, is lightweight,...
Briefs: Physical Sciences
The complementary barrier infrared detector (CBIRD) is designed to eliminate the major dark current sources in the superlattice infrared detector. The concept can also be applied to bulk...
Briefs: Materials
A document discusses room-temperature ionic liquids (RTILs) used as electrolytes in carbon-nanotube-based, electrochemical, double-layer capacitors. Unlike the previous electrolyte (EtNB4 in acetonitrile), the RTIL used here does not produce cyanide upon thermal decomposition and does...
Briefs: Materials
A document discusses self-deployable, rigidized structures that are ultra-lightweight and have gas barrier properties, space durability, and high impact resistance. Developed here are microcellular-foamed sandwich structures made from nanocomposite shape memory...
Briefs: Electronics & Computers
A new dimension of system architecture design is emerging where hundreds to thousands of ultralight (
Briefs: Mechanical & Fluid Systems
Advances in engine performance and reliability require sensor components that operate reliably under extreme engine operating conditions (e.g., takeoff, max thrust) and in...
Briefs: Physical Sciences
To address the issue of poor georegistration performance for small unmanned aerial vehicles (UAVs), navigation and target-location accuracy improvements achievable by tightly integrating an image-based feature-tracking algorithm with Global Positioning System (GPS) and a...