Topic

Stories

0
32670
30
Products
Pentek (Upper Saddle River, NJ) offers two Quad Serial FPDP (Front Panel Data Port) modules with a Xilinx Virtex-6 FPGA: the Model 71611 XMC module and the Model 7811 native PCI Express card. These new Serial FPDP...
Feature Image
Products
Setra Systems (Boxborough, MA) has introduced its Remote Measurement Display, allowing for clear and remote viewing capabilities of real-time “at a glance” HVAC/R conditions, ensuring effective climate control...
Feature Image
Products
L-com (North Andover, MA) has added new products to its lineup of industrial, ruggedized, and Mil-Spec fiber optic products, including connectors, adapters, and connector/adapter dust covers. The new products, designed...
Feature Image
Products
Microstar Laboratories (Bellevue, WA) has announced the release of a new Rotating Machinery Analysis Module, with software tools to facilitate mixed time measurements and rotation measurements of rotating...
Feature Image
Products
The Tau® SWIR 15 micron camera from FLIR Systems (Colorado Springs, CO)is a low-power, shortwave imager that incorporates FLIR’s new 15 micron pixel 640 × 515 InGaAs focal plane array. The system delivers sensitivity...
Feature Image
Products
Technology Advancement Group® (TAG®) (Virginia Beach, VA) have expanded their rugged small form factor computer research and development to focus on designing custom Mini-Brick™ computers that are lighter and take...
Feature Image
Products
Advanced Cooling Technologies’ (ACT) (Lancaster, PA) high conductivity (k) VME and VPX frames feature embedded heat pipes to greatly increase heat transfer. This includes a technique to embed heat pipes that...
Feature Image
Products
Linear Technology Corporation (Milpitas, CA) has released automotive (H-grade) and high-reliability military (MP-grade) versions of the LTM2881 and LTM2882, isolated μModule® transceivers, which guard against large...
Feature Image
Products
LDRA Ltd. (Wirral, Merseyside, UK) has extended the integration of the LDRA source code analysis tool suite with MathWorks Simulink modeling tools. With the integration, Simulink model test vectors can confirm an...
Feature Image
Products
The conga-QMX6 Qseven Computer-on-Module from congatec (San Diego, CA) is equipped with the Freescale i.MX6 ARM Cortex A9 processor. The processor product line, scalable from 1 to 4 ARM cores, features a 3D-ready HD...
Feature Image
Products: Medical
Hypertronics Corporation (Hudson, MA) has expanded its Shielded HyperGrip® connector line. In addition to the 19-position HG3, the product series is now also available in a 12- position HG2 and a...
Feature Image
Products: Medical
ICCNexergy (Chicago, IL) has launched a 20 Watt desktop power supply line for both medical (MWA020) and ITE/Commercial (FWA020) applications. It meets EISA, EuP level V efficiency standards and is available in both class...
Feature Image
Products: Medical
The 954 electrically heated 2,000 °F inert atmosphere heavy-duty box furnace from Grieve Corporation (Round Lake, IL) is used for heat treating titanium. 57 KW are installed in nickel chrome wire coils, supported by...
Feature Image
Products: Medical
On Line Controls (Hudson, MA) has introduced a new remote control unit for MicroAir II ultra-low air pressure controllers used in the manufacture and extrusion of medical, catheter, and automotive tubing. The unit is...
Feature Image
Products: Imaging
Nameplates for Industry (New Bedford, MA) has introduced custom fabricated front panel graphic overlays for high-end medical devices and laboratory instruments or equipment. The graphic overlays feature...
Feature Image
Products: Medical
Analog Devices (Norwood, MA) introduces the ADXL362, a 3- axis, digital MEMS accelerometer that operates at 300 nA in motion sensing wake-up mode, consuming 60% less current than the closest competing sensor in the...
Feature Image
Products: Medical
Kent Elastomer Products (Kent, Ohio) has released its line of Pro-Free™ non-latex tubing as a stock product in four standard sizes and packaged in 50 foot continuous lengths in a poly-lined re-shippable carton. This...
Feature Image
Products: Medical
Master Bond (Hackensack, NJ) offers a two-component silicone MasterSil 153 that is a self priming system, can be cured over wide surface areas, and features easy handling with precise application. MasterSil 153 has a low...
Feature Image
Products: Medical
Pletronics (Lynnwood, WA) has released its TCG4 Series temperature-compensated voltage-controlled crystal oscillator (TCVCXO) for small hand-held electronic devices where a highly stable, precision...
Feature Image
Products: Medical
Interface Catheter Solutions (Laguna Niguel, CA) introduces high-efficiency water jackets to improve balloon yields and balloon forming cycle times. A water jacket is the balloon forming machine module that...
Feature Image
Products: Medical
Advanced Antivibration Components (New Hyde Park, NY) has published a new 192-page products catalog “Foot Mounts Catalog V120,” featuring more than 4,000 components in polyamide, stainless steel, and steel bases. It...
Feature Image
Products: Medical
Haydon Kerk Motion Solutions (Waterbury, CT) released a new version of its 36 mm OD G4 linear actuator, which includes a special adapter plate allowing the smaller unit to replace 42 mm and 46 mm units in...
Feature Image
Products: Medical
The CSRF series from Stackpole Electronics, Inc. (Raleigh, NC) is a foil on ceramic carrier technology that can achieve lower resistance values than thick film technology and offers excellent TCR of as low as 50...
Feature Image
Products: Motion Control
The MESA 7I77 card set from Mesa Electronics (Richmond, CA) is a FPGA-based, 6-axis analog control system for CNC, industrial automation retrofits, and OEM systems. Six axes of analog outputs and encoder inputs are...
Feature Image
Products: Robotics, Automation & Control
The 118Z Series pressure/vacuum oil-less diaphragm pump from Thomas Division (Sheboygan, WI) provides a low-vibration design that utilizes a lightweight nylon housing and end cap that limit the pump’s weight to 4.4 pounds. It...
Feature Image
Products: Motion Control
Applimotion (Loomis, CA) has introduced new models of the UTS slotless frameless direct drive motors in sizes from 12 mm to 300 mm diameter. The motors feature zero cogging and sinusoidal torque curves. With large...
Feature Image
Products: Robotics, Automation & Control
SPEED 2012 software from CDadapco (Melville, NY) consists of five machine programs: PC-BDC (Brushless PM Motors), PC-IMD (Induction Motors), PCDCM (DC Brush Motors), PC-WFC (DC and AC Wound Field Motors), and...
Feature Image
Products: Motion Control
The Drives & Motion Division of Yaskawa America (Waukegan, IL) has released the P1000 variable speed drive that provides control for variable-torque loads through 500. Configuration tools include a multi-language LCD...
Feature Image
Products: Robotics, Automation & Control
Bauer Gear Motor, an Altra Industrial Motion Company (South Beloit, IL), offers a range of permanent magnet synchronous motors (PMSM). The motors employ a rotor design that integrates embedded permanent magnets made from the...
Feature Image

Ask the Expert

Dan Sanchez on How to Improve Extruded Components
Feature Image

Improving extruded components requires careful attention to a number of factors, including dimensional tolerance, material selection, and processing. Trelleborg’s Dan Sanchez provides detailed insights into each of these considerations to help you advance your device innovations while reducing costs and speeding time to market.

Inside Story

Inside Story: Trends in Packaging and Sterilization
Feature Image

Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.