Topic

A 3D finite element mathematical model has been developed for representing a behavior of a magnetic mirror and nano antenna subject to polarized incident light. This model represents the fourth generation of magnetic mirror with the goal of suppressing the diffraction.

A high-fidelity numerical simulation software (CRUNCH CFD®) predicts the transient performance of flight valve designs, provides design support by supplementing current empirical rules, and diagnoses system anomalies. Currently, transient analysis of valves is...

In this innovation, a method makes use of a new technique for describing analog information based on the roots of polynomial functions of infinite degree. Monotonic analog signals are transformed into characters that are fused into a two-dimensional composite visualization of the generating signal...

A fast Fourier transform (FFT) was developed as part of the Soil-Moisture Active/Passive (SMAP) project. The FFT was created on 16-bit data arriving at a rate of 48 MHz to run on a resource-constrained, space-grade field programmable gate array (FPGA).

An Integrated Modular Avionics (IMA) architecture provides a common platform for software partitions with shared processing and input/output (I/O) resources. A key feature of the IMA architecture is I/O partitioning. An IMA system will prevent one...

Smart sensors for measuring temperature and pressure have been developed as part of the Advanced Ground Systems Maintenance (AGSM) project. The sensors have flash memory for storing firmware, calibration data, and configuration information....

An updated software model has been developed for predicting the single-event effect (SEE) rates in circuit designs as they are being designed. This tool will be used for estimating the frequency of the various SEEs, such as logic upsets and circuit latch-up. It may also be used to estimate the total...

Saturn’s moon Titan is of high interest for in situ study due to its many intriguing features. This moon has a dense atmosphere; rough, icy terrain; and low surface winds that make it the ideal place to send a controlled aerial robotic platform, such as...

The Powered Descent Guidance (PDG) software provides a computationally efficient guidance algorithm for powered descent that ensures satisfaction of the governing dynamics, along with adherence to physical control and state constraints, such as avoid the surface, limit thrust magnitude and...

Many of the most challenging aspects of propulsion system development are related to the prediction of interacting effects among fluid loads, thermal loads, and structural deflection. A typical design practice might ignore the interaction between the physical phenomena where...

An easy-to-use design tool was developed in response to a large number of documented cases of critical (flight and ground) hardware failing after experiencing drops during commercial shipment. By entering the mass of the hardware to be protected, and the drop height, the software helps the user select the type and...

The Evolutionary Mission Trajectory Generator (EMTG) is a global trajectory optimization tool for designing interplanetary missions that perform multiple flybys and either low-thrust or high-thrust propulsive maneuvers on the way to destinations in the solar system. Some targets, such as Mars and Venus, are...

Communicating the current International Space Station (ISS) configuration and also potential ISS configurations is a necessity during ISS trade studies and Ops Con development. Often, multiple configuration options will need to be communicated. Doing so without a means of displaying an...

A model describing supercritical-pressure, multi-species turbulent mixing has been developed to simulate situations prevailing in diesel, gas turbine, and HCCI (homogeneous charge compression ignition) engines. It is also a situation occurring in atmospheric planetary science,...

Elementary-reaction chemical kinetics of hydrocarbon oxidation consists of hundreds to thousands of species and thousands of reactions. As such, it is impossible to use it in models and codes involving turbulence because computations are unfeasible due to lack of memory and...

The FAA, using its CARI-6 program, provides galactic cosmic radiation dosage rates for any location on the Earth from ground up to 60,000 ft (≈18,300 m). One way to protect astronauts from galactic cosmic radiation (GCR) on a Mars mission is to use...

The iSWA system is a Web-based dissemination framework for NASA-relevant space weather information that combines forecasts based on the most advanced space weather models with concurrent space environment information. A key design driver for the iSWA system is to generate and present vast amounts of...

Mars Science Laboratory (MSL) surface operations require precise and accurate knowledge of rover position. A key means of establishing/verifying position is to match ortho-rectified mosaics from the MSL onboard cameras to orbital data. Manual localization by matching mosaics to HiRISE...

The SAM/MSL Terrestrial Background Spectral Library is one of the tools developed for identifying known terrestrial background for the Mars Science Laboratory (MSL) Sample Analysis at Mars (SAM) mission. The SAM instrument suite can detect trace elements in the ppb range and therefore requires a...

Spaceflight and planetary exploration place severe constraints on the available bandwidth for downlinking large hyperspectral images. Communications with spacecraft often occur intermittently, so mission-relevant hyperspectral data must wait for analysis on the ground before it can inform...