Topic

The lunar regolith exhibits extremely low conductivity. Penetrating the regolith presents problems if the geo-technical properties of the regolith are not well understood and accounted for.

ZONE (Zeroing Out Negative Effects) is a method of biofeedback training for optimal athletic performance. ZONE is designed to improve athletes’ responses to stress, anxiety, and loss of concentration during competition. In the training environment, when the user successfully attains an optimal...

In high-integrity systems, a method of assuring integrity called a self-checking pair is employed. A self-checking pair is a logical grouping of two of the same devices performing the same operation and cross-checking each other to ensure correct operation. In this manner, a...

The system and method of reconfigurable Auditory-Visual Display creates a multi-mode communications environment with the express intent of increasing situational awareness for the operator (controller), and for reducing operator fatigue. Situational awareness is increased by a...

Electrical ohmic contacts can be simultaneously formed on silicon carbide (SiC) semiconductors having donor and acceptor impurities (n- and p-type doping, respectively). This implies that such contacts can be formed on SiC layers in one process step during the fabrication of the semiconductor device....

Aircraft noise is a significant problem with both economic and public health implications, especially for communities near airports. As a result, increasingly stringent constraints are being placed on aircraft carriers worldwide to reduce this noise. The current disclosure focuses on airframe noise generated at or...

TUFROC has an exposed surface edge design and an appropriate materials combination for a space vehicle that will survive the mechanical stresses induced in the initial ascent, and will subsequently survive the extreme heating and mechanically stressful environment of...

High-efficiency tantalum-based ceramic (HETC) composite structures are suitable for use in thermal protection systems. These composite structures have high-efficiency surfaces (low catalytic efficiency and high-emittance), thereby reducing heat flux to a spacecraft during planetary...

Two methods have been developed for functionalizing carbon nanotubes in solvent-free conditions. In one method, purified single-walled carbon nanotubes (SWNTs) and a diazonium salt are added to a metal vial, which is loaded with a stainless steel ball bearing. The metal...

Copoly(alkyl ether imide)s were synthesized for the purposes of tailoring surface chemistry. Alkyl ether oligomers with amine end groups were synthesized from the hydroxyl-terminated species, and subsequently reacted with aromatic dianhydrides and diamines to make the...

Spacecraft internal active thermal control systems (ATCSs) typically use water or a water mixture as their working fluid. A gas-charged bellows accumulator pressurizes the system and provides liquid inventory control. If only a single internal ATCS loop is used, the accumulator...

This innovation is a rocket purge vent design that can control and balance flow across multiple vents and across very large gas flow ranges while keeping water or other undesirable gases from entering into the vented space. When changing purge rates, this device adapts to the...

Producing electric power for space applications is challenging. Although short-term missions can use batteries or fuel cells, these sources are not practical for durations longer than one month. Photovoltaics become less attractive as the distance from the Sun increases, and they are...

The proposed techniques rely on three principal concepts: (1) controlling the polarity of electromagnets, (2) circulating fluid through a compartmentalized bladder, and (3) expanding and deflating polymers. These designs would allow amorphous robots to move across a surface without conventional wheels or legs....

The purpose of this innovation is to simulate the space temperature environment onto a fluid disconnect. This environment is to be maintained for a long period of time (48 hours) at a controlled temperature [6 ±2 °F(≈–14.4 ±1.1 °C)] to determine if temperature is causing leakage through the disconnect.

One or more biometric indicia, such as fingerprints, voice prints, retinal scans, and facial features, are often used to identify or authenticate the identity of a user seeking access to a given resource. Cardiac muscle is myogenic and is capable of generating an action potential and...

A comparative analysis was carried out between an emerging cryogenic grinding method and a conventional wet-chemistry/bead-beating endospore disruption approach. After extensive trial and error, it was determined that a regimen of three cryogenic grinding cycles of 2 minutes each was...

Short block codes are in demand by international space agencies for transmission of command and control data to spacecraft in the uplink channel. Codes that outperform currently used binary codes with the same block lengths and code rates are desirable. A design method constructs...

A method has been developed for resolving algebraic loops that occur in closed-loop systems when using MathWorks Simulink modeling and simulation tools. This variable fidelity method improves accuracy and reduces runtime significantly for users of Simulink Coder...