Topic

FibreCoat’s New Radar-Absorbing ‘Stealth’ Fiber Reinforced Composites for Spacecraft, Aircraft and Tanks

FibreCoat, the German materials startup, has developed a groundbreaking fiber reinforced composite that is capable of making aircraft, tanks and spacecraft invisible to radar surveillance. Read on to learn more about it.

The Future of EMI Shielding Is Lightweight, Flexible, and Ready for Flight

Modern military aircraft represent some of the most complex electronic environments ever engineered. These platforms integrate advanced avionics, radar systems, data links, and communication networks that must function seamlessly in hostile, high-frequency environments. In these mission-critical contexts, electromagnetic interference (EMI) poses a silent but serious threat that can degrade signal integrity, cause crosstalk between systems, or even lead to mission failure. Read on to learn more.

Balancing Cost, Performance and Weight in Designing UAVs

The use of UAVs is increasing rapidly - including their use for delivery in highly populated areas by Amazon, DHL and other logistics firms, meaning the balance between cost and performance is becoming a more pressing concern. Read on to learn what this means.

Quality by Design: Imperatives for Aerospace and Defense Manufacturing

This article will provide pragmatic insights and best practices for balancing the connector design, manufacturing and testing requirements that are needed to meet evolving demands for product reliability and durability.

Physical Designs by Artificial Intelligence

A quick spoiler alert: Using AI still requires well-considered human input to make it all happen and it demands digital manufacturing to do it quickly.

Product of the Month

See the product of the month: STMicroelectronics' LEOPOL1 point-of-load step-down converter for low-Earth orbit deployments targeting the needs of equipment developers in the space market.

Products of Tomorrow

See the products of tomorrow, including a new tunable laser that uses a series of rings to smoothly emit many light wavelengths from a single chip; a smart capsule called PillTrek, which can measure pH, temperature, and a variety of different biomarkers; and more.

New on the Market

See what's new on the market, including Creform Corporation's cart, ACROS®, designed to be used on challenging terrains such as snow, soil, sand, mud, grass, rough concrete, and even steps; Instron's AT3 Floor Model testing system, for automated metals testing; Motorized high-resolution actuators from PI Americas; Walter's new countersink option; and more.

New Physics-Based Simulation Tool Accelerates Battery Development

For years, researchers have been developing tools to accelerate the materials discovery and development of new energy storage technologies, including those that can predict the performance of the batteries systems for long-term grid services. With a new physics-based simulation tool, EZBattery Model, it now takes less than a second to predict the performance of redox flow batteries and its variants. Read on to learn more.

How ISS Will Be Evaluating Photovoltaic Materials

Solar cells account for approximately six percent of the electricity used on Earth; however, in space, they play a significantly larger role, with nearly all satellites relying on advanced solar cells for their power. That’s why Georgia Tech researchers will soon be sending 18 photovoltaic cells to the International Space Station (ISS) for a study of how space conditions affect the devices’ operation over time. Read on to learn more.

A New Computer Vision Method Enables Faster Screening of Electronic Materials

A new computer vision technique developed by MIT engineers significantly speeds up the characterization of newly synthesized electronic materials. The technique automatically analyzes images of printed semiconducting samples and quickly estimates two key electronic properties for each sample. Read on to learn more.

New Technique Could Accelerate Noise-Free Superconducting Qubits for Quantum Computing

A research team led by scientists at Lawrence Berkeley National Laboratory (Berkeley Lab) has developed a new fabrication technique that could improve noise robustness in superconducting qubits, a key technology for enabling large-scale quantum computers. Read on to learn more.

Thin Film Sensor for Ultra High-Temp Measurement

Innovators at NASA Johnson Space Center have developed a thin film sensor that measures temperatures up to 1200 °F, and whose prototype successor may achieve measurements up to ~3000 °F — which was the surface temperature of the Space Shuttle during its atmospheric reentry. Read on to learn more.

‘Exergames’ Aim to Make Working Out Enjoyable

Virtual reality video games that combine screen time with exercise are a great way to get fit, but game designers face a major challenge — adherence to ‘exergames’ is low, with most users dropping out once they start to feel uncomfortable or bored. Read on to learn what a team did to thwart this.

Advanced Thermal Inspection with Pulsed Light Emitting Diodes (PLED) Technology

Engineers at NASA Langley Research Center have developed a cutting-edge thermal inspection technology that enhances defect detection on low-emissivity surfaces by eliminating false readings caused by infrared reflections. Read on to learn more.

Twisted Moiré Photonic Crystals

Researchers have developed an on-chip twisted moiré photonic crystal sensor that uses MEMS technology to control the gap and angle between the crystal layers in real time. The sensor can detect and collect detailed polarization and wavelength information simultaneously. Read on to learn more.

3D Printing Self-Heating Microfluidic Devices

MIT researchers have used 3D printing to produce self-heating microfluidic devices, demonstrating a technique which could someday be used to rapidly create cheap, yet accurate, tools to detect a host of diseases. Read on to learn more.

Diversifying the Supply Chain for Producing Large-Scale Metal Parts

Researchers at the Department of Energy’s Oak Ridge National Laboratory are using advanced manufacturing techniques to revitalize the domestic production of very large metal parts that weigh at least 10,000 pounds each and are necessary for a variety of industries, including clean energy. Read on to learn more.

A One-Piece Liquid Rocket Thrust Chamber Assembly

NASA researchers are eliminating complex joints by manufacturing a 1-piece TCA utilizing 3D printing and large-scale additive manufacturing technologies to directly deposit the nozzle onto the combustion chamber. And, by replacing a traditional solid metal jacket with a composite overwrap for support, the overall weight is reduced by over 40 percent. Read on to learn more.

Flexible Silicon Photovoltaics: A Breakthrough in Space-Grade Solar Power

In-space manufacturing is expected to become a core part of future space economy by using assets in orbits or beyond Earth orbit for use in space. Tech Briefs interviewed space-focused solar energy startup Solestial’s CTO Stanislau Herasimenka about the key technology developments leading to this increased momentum for space-based manufacturing and the role solar power will play in it. Read on for the full interview with Herasimenka, edited for length and clarity.

How to Optimize for Isolation and Performance Using Advanced Digital Isolators

This article briefly examines why isolation is required, emphasizing the need in sensor-based circuits. It then looks at various aspects of isolation using state-of-the-art digital isolators from Analog Devices and shows how they can be applied.

Positioning Wafers with Micrometer Precision for PECVD Coating

For loading and unloading workpiece carriers containing wafers of different sizes in an automated process prior to PECVD coating, acp systems has developed a robotic solution aided by image processing for a leading manufacturer of space solar technology. Read on to learn more.

New Imaging Technologies Achieve Real-Time Boundary Detection, Single-Shot High-Dynamic Range Imaging

Patent-pending imaging technologies created in Purdue University’s College of Engineering could be developed and commercialized for applications as diverse as medical imaging, autonomous navigation, surveillance, microscopy, and advanced manufacturing. Read on to learn more about it.

Optimizing Laser Cutting in Semiconductor Advanced Packaging

DPSS lasers are a critical enabling technology for meeting the precision materials processing demands of advanced packaging. Both nanosecond and USP lasers can achieve excellent results, but the right choice depends on specific requirements. Read on to learn more.

New Products

See the new products, including Corning Incorporated's Corning® Gorilla® Glass Ceramic; Epoxy Technology's EPO-TEK®353NDP, a high-performance, humidity-resistant epoxy; Edmund Optics' off-the-shelf HOLO/OR Diffractive Diffusers and Beamsplitters; Teledyne Technologies subsidiary FLIR's advanced multispectral imaging solution; and much more.

Tunable Laser Light

Researchers have invented a new type of tunable semiconductor laser that combines the best attributes of today’s most advanced laser products, demonstrating smooth, reliable, wide-range wavelength tuning in a simple, chip-sized design. Read on to learn more about it.

Sensitive Yet Tough Photonic Devices Are Now a Reality

Engineers at the University of California San Diego have achieved a long-sought milestone in photonics: creating tiny optical devices that are both highly sensitive and durable — two qualities that have long been considered fundamentally incompatible. Read on to learn more.

Chiral Photonic Device Combines Light Manipulation with Memory

As fast as modern electronics have become, they could be much faster if their operations were based on light, rather than electricity. Fiber optic cables already transport information at the speed of light, but to do computations on that information without translating it back to electric signals will require a host of new optical components. Researchers have now developed such a device. Read on to learn more.