Topic

Stories

0
30120
30
Application Briefs: Defense
The U.S. Air Force has selected Cambium Networks’ pointto- point (PTP) 45600 High Capacity Line-of-Sight (HCLOS) radio for its Theater Deployable Communications program of record (TDC PMO). Supported by General Dynamics,...
Feature Image
Application Briefs: Defense
Harper International has been selected by U.S. Demil, LLC (USD) for the design of a continuous, indirect Rotary Thermal Treatment Unit (TTU). The equipment will support US Department of Defense...
Feature Image
Articles: RF & Microwave Electronics
Consumers have shown that they are eager to be rid of cabling and wires connecting them to devices situated or worn near or on the body. From athletic monitoring devices to headphones,...
Feature Image
Articles: RF & Microwave Electronics
Researching fault location techniques for the oil industry requires data on the complex permittivity of the polyamide Rilsan at microwave frequencies....
Feature Image
Articles: Electronics & Computers
Sequestration, defense reform and cost constraints are driving a new paradigm in the defense industry, where leveraging existing technologies is no longer optional, but required. This is especially true as we migrate from VME to...
Feature Image
Products: Test & Measurement
Avnet Electronics Marketing (Phoenix, AZ) has released MicroZed, a $199 evaluation kit based on the Xilinx Zynq®- 7000 All Programmable SoC. MicroZed supports multiple use models for exploration, prototyping and System-...
Feature Image
Products
United Electronic Industries (UEI) (Walpole, MA) has released a new Ethernet-based data acquisition (DAQ) and control platform. The DNF-4-1G FLATRACK provides two Gigabit Ethernet (100/10 Base- T compatible)...
Feature Image
Products
Chassis Plans (San Diego, CA) has upgraded its militarygrade rugged 24" rackmount LCD monitor, the CPX1-241, and industrial-grade large rugged LCD monitor, the CPI1- 241, to include multi-touch technology with gesture...
Feature Image
Products
Creative Electronic Systems SA (Geneva, Switzerland) has announced the FIOV-2310, a 3U OpenVPX™ module with a Xilinx Kintex™-7 325T/410T user-programmable FPGA at its core. The FIOV-2310 allows the configuration of the...
Feature Image
Products
GE Intelligent Platforms (Huntsville, AL) recently introduced the rugged IBX400 6U OpenVPX InfiniBand® Switch Fabric Module. The module complements GE’s existing GBX460 10 Gigabit Ethernet Switch...
Feature Image
Products
Pentek (Upper Saddle River, NJ) has announced its Model 8266 PC development system, pre-configured to speed application development for Pentek Cobalt® Virtex-6 and Onyx® Virtex-7 FPGA PCI Express software radio and data...
Feature Image
Products
Connect Tech (Toronto, Ontario, Canada) has released the Xtreme/GPU board in PCIe/104 form factor. Partnered with AMD technology, the Xtreme/GPU drives up to four Mini DisplayPort connections for either independent use, or...
Feature Image
INSIDER: Materials
Creating Next-Generation Prosthetic Heart Valves
Engineers in the School of Biomedical Engineering and the Department of Mechanical Engineering at Colorado State University, Fort Collins, are developing a new family of replacement heart valves made from synthetic materials that, they say, will be superior to current mechanical and tissue-based...
Articles: Motion Control
Fundamentally, a servo system can perform no more accurately than the accuracy of the feedback device controlling it. In addition, errors in speed or position can be introduced into the system by the...
Feature Image
Application Briefs: Motion Control
Special care needs to be taken when handling delicate materials used in medical applications. Small diameters provide increased flexibility needed for long-flex-life applications such as cardiac catheter wires. Many...
Feature Image
Products: Motion Control
The i-series planetary gearboxes from Groschopp (Sioux Center, IA) are available with AC, PMDC, and brushless motors, and are made of cast aluminum. They are offered with up to three stages of steel cut or optional plastic gears,...
Feature Image
Products: Motion Control
CD-adapco (Melville, NY) offers two connected simulation programs, SPEED and STAR-CCM+, for machine design. The SPEED tool is used to design motors, generators, and alternators; STAR-CCM+ is a heat transfer and thermal...
Feature Image
Products: Motion Control
Warner Linear (Belvidere, IL) has announced the ITrack linear actuators for light- and medium-duty applications where parallel motor type actuators won’t fit in limited space requirements. The actuators feature a release...
Feature Image
Products: Motion Control
Reell Precision Manufacturing (St. Paul, MN) offers the TI-100 and TI-200 Series torque control hinges that provide pivoting capabilities without the standard appearance of conventional hinges. Depending on model, the...
Feature Image
Products: Motion Control
Applimotion (Loomis, CA) has introduced custom gearmotors for high-torque, low-speed, and low-profile applications. The assemblies combine gearing and direct drive frameless motor kits. The ULT, UTH, and UTS low-profile frameless...
Feature Image
Products: Robotics, Automation & Control
Lin Engineering (Morgan Hill, CA) offers the R1025 stepper motor driver that can be used with stepper motors ranging from NEMA 8 to NEMA 42. The driver is capable of output currents ranging from 0.8 to 10 amps peak while...
Feature Image
Products: Motion Control
Designed for air seats, light-duty air suspension, and other mobile applications, the Thomas 135 Series DC WOB-L® compressor from Thomas Division, a Gardner Denver Company (Sheboygan, WI), is a compact, lightweight...
Feature Image
Products: Motion Control
Measurement Specialties (Hampton, VA) has introduced a rugged, triaxial DC accelerometer for steady-state, low-g vibration measurements and high-g transient shock measurements. The piezoresistive, MEMSbased Model 3803A provides...
Feature Image
Products: Motion Control
Heidenhain Corp. (Schaumburg, IL) offers the Leine & Linde DRIVE-CLiQ encoder platform for operation in harsh drive environments where they are exposed to vibration, shock, and mechanical loads. The encoder can be installed to the...
Feature Image
Products: Motion Control
HBM (Marlborough, MA) offers the T40B and T40FM torque transducers that include an integrated speed measurement system. They are designed to work in harsh environments such as those that contain humidity, condensation, dust,...
Feature Image
Products: Robotics, Automation & Control
Zero-Max (Plymouth, MN) offers Roh’lix® linear actuators made from stainless steel for use where cleanliness is a priority. Used to convert rotary motion to linear travel, the actuators carry loads at speeds up to 70 inches...
Feature Image
Products: Motion Control
The PlanarDL-series stages from Aerotech (Pittsburgh, PA) are available in nine different travel and performance configuration applications ranging from high-accuracy surface profilometry to high-speed semiconductor and LED...
Feature Image
Articles: Sensors/Data Acquisition
While charge-coupled device (CCD) and complementary metal-oxide semiconductor (CMOS) sensors perform similar functions — collecting light (photons) and converting those into...
Feature Image
Application Briefs: Aerospace
Aurora Flight Sciences delivered a completed Space Suit Simulator (S3) to NASA following the successful completion of a Phase II Small Business Innovation Research (SBIR) effort.
Feature Image

Ask the Expert

Eric Dietsch on the Benefits of Nitinol Wire
Feature Image

In collaboration with the Fort Wayne Metals Engineering team, Eric Dietsch focuses on supporting customers with material recommendations, product development, and education. Eric is available to help you and your company with any Nitinol-related questions or needs that you may have.

Inside Story

Inside Story: Trends in Packaging and Sterilization
Feature Image

Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.