Videos: Aerospace
Developed by researchers at the Institute for Dynamic Systems and Control at ETH Zurich, the Distributed Flight Array is a flying platform made up of multiple...
News: Defense
In their quest for better helmet technologies to keep soldiers and marines safe on the battlefield, researchers at Natick Soldier Research, Development and Engineering Center are making a "HEaDS-UP" play.
Videos: Green Design & Manufacturing
Richard Laine, an engineering professor at the University of Michigan, has developed an inexpensive way to transform common silica into chemicals that can be used in many...
R&D: Medical
A team of electrical and mechanical engineers at Israel’s Tel Aviv University (TAU) has developed a way to print biocompatible components for microelectromechanical systems (MEMS),...
R&D: Materials
Researchers at Northwestern University, Evanston, IL, discovered that natural products, like green tea leaves, red wine, dark chocolate, and cacao beans could inspire excellent antibacterial...
R&D: Medical
Scientists at Duke University, Durham, NC, report that microscopic stresses and tears in a new kind of man-made material could help the substance bulk up like an athlete building stronger muscles. They...
R&D: Imaging
A team of scientists from the U.S. Department of Energy’s Lawrence Berkeley National Laboratory and the University of Wisconsin-Milwaukee (UWM) announced that they have developed the first technique to...
R&D: Electronics & Computers
Researchers at the National Physical Laboratory, Middlesex, UK, Electronics Interconnection group has developed a new method to produce conductive textiles. This new technique could make...
R&D: Medical
Scientists at the University of California, Berkeley, have built an experimental device that, they say, could speed up medical imaging using amorphous silicon and a surprising simple inexpensive...
Briefs: Manufacturing & Prototyping
Quality knives are typically fabricated from high-strength steel alloys. Depending on the application, there are different requirements for...
Briefs: Manufacturing & Prototyping
Returning samples of Martian soil and rock to Earth is of great interest to scientists. There were numerous studies to evaluate Mars Sample Return (MSR) mission architectures, technology needs, development plans, and requirements. The largest propulsion risk element of the MSR mission is the Mars Ascent Vehicle...
Briefs: Materials
Recently, additive manufacturing (AM) techniques have been developed that may shift the paradigm of traditional metal production by allowing complex netshaped...
Briefs: Materials
A method has been developed for creating aerogel using normal pressure and ambient temperatures. All spacecraft, satellites, and landers require the use of thermal insulation due to the extreme environments encountered in space and on extraterrestrial bodies. Ambient dried aerogels introduce the possibility of using aerogel...
Briefs: Materials
Adiabatic demagnetization refrigerators (ADR) are operated in space to cool detectors of cosmic radiation to a few 10s of mK. A key element of the ADR is a superconducting magnet operating at about 0.3 K that is continually energized and de-energized in...
Briefs: Mechanical & Fluid Systems
This invention is a new approach to designing foil bearings to increase their load capacity and improve their reliability through passive thermal management. In...
Briefs: Mechanical & Fluid Systems
A rocket engine igniter has been created that uses a pneumatically driven hammer that, by specialized geometry, is induced into an oscillatory state that can be used to either repeatedly impact a piezoelectric crystal with sufficient force to generate a spark capable of initiating combustion, or can be...
Briefs: Mechanical & Fluid Systems
An integrated, generic unibody composite pressurized structure (UCPS) combined with a positive expulsion device (PED), consisting of an elastomeric bladder for monopropellant hydrazine, has been quasi-standardized for spacecraft use. The combination functions as an all-composite, nonmetallic, propellant tank...
Briefs: Mechanical & Fluid Systems
Astrophysical observations at millimeter wavelengths require large (2-to-5- meter diameter) telescopes carried to altitudes above 35 km by scientific research balloons. The scientific performance is greatly enhanced if the telescope is cooled to temperatures below 10 K with no...
Briefs: Physical Sciences
In popular perception, the vastness of space is an empty vacuum dotted with stars, planets, black holes, and other celestial formations. In reality, astrophysicists have shown that...
Briefs: Physical Sciences
During cryogenic vacuum testing of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM), the global alignment of the ISIM with respect to the designed interface of the JWST optical telescope element (OTE) will be measured through a series of optical...
Briefs: Physical Sciences
Pulse compression has been widely used in radars so that low-power, long RF pulses can be transmitted, rather than a high-power short pulse. Pulse compression radars offer a number of advantages over high-power short pulsed radars, such as no need of highpower RF circuitry,...
Briefs: Physical Sciences
SweepSAR, a novel radar architecture that depends on a DBF (digital beamforming) array, requires calibration accuracies that are order(s) of magnitude greater...
Briefs: Physical Sciences
A common problem in optical detection is determining the arrival time of a weak optical pulse that may comprise only one to a few photons. Currently, this problem is solved by using a photodetector to convert the optical signal to an electronic signal. The timing of the...
Briefs: Physical Sciences
The presence of the Poisson Spot, also known as the spot of Arago, has been known since the 18th century. This spot is the consequence of constructive interference of light diffracted by the edge of the obstacle where the central position can be determined by symmetry of the...
Briefs: Information Technology
Aircraft performance can be compromised when ice forms on aircraft surfaces such as the wings, nacelles, sensors, and control systems. This can cause safety issues due to significant changes in...
Briefs: Information Technology
Educational NASA Computational and Scientific Studies (enCOMPASS) is an educational project of NASA Goddard Space Flight Center aimed at bridging the gap between computational objectives and needs of NASA’s scientific research, missions, and projects, and academia’s latest...
Briefs: Information Technology
A large-scale network that supports a large number of users can have an aggregate data rate of hundreds of Mbps at any time. High-fidelity simulation of a large-scale network might be too complicated and memory-intensive for typical commercial-off-the-shelf (COTS) tools. Unlike a...
Briefs: Information Technology
The objective of this research was to develop a fundamentally new method for detecting hidden moving targets within noisy and cluttered data-streams using a novel “soliton resonance” effect in nonlinear dynamical systems.
Briefs: Mechanical & Fluid Systems
This work describes the scaling and design attributes of Nested Hall Thrusters (NHT) with extremely large operational envelopes, including a wide range of throttleability in power and specific impulse at high efficiency (>50%). NHTs have the potential to provide the game...