Topic

Spinal Implant May Combat Paralysis

École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerlandhttp://actu.epfl.ch Spinal cord injuries may no longer mean a lifetime of paralysis, say researchers at EPFL. They have developed a new...

Guide Wire Coatings Put to the Test

Guide wires with a highly lubricious coating are an essential staple of many interventional procedures. In the operating room (OR), you can observe guide wires undergoing multiple passes, constant rotational...

Surface Engineering in Medical Technology: From DLC to Plasma and Beyond

New materials and technological advances continue to proliferate the medtech industry at a rapid rate, and suppliers strive to offer innovative solutions to meet the...

FluoroPEELZ™ Peelable Heat Shrink

Zeus, Orangeburg, SC, announces the release of FluoroPEELZ™, a new optically clear peelable heat shrink, which offers catheter manufacturers a new method to increase yield and improve safety. Removing...

USB Arbitrary Waveform Generator

ACCES I/O Products, Inc., San Diego, CA, introduces a new USB high speed arbitrary waveform output board with flexible ranges and configurable digital I/O lines. Industry standard BNC connectors are used for...

Pneumatic Products & Solutions Catalog

Clippard Instrument Laboratory, Inc., Cincinnati, OH, has just released its new full line catalog. This new edition features more than ten new product lines including specifications, technical drawings,...

Replacement Laser Optics for Marking and Engraving

Laser Research Optics, Providence, RI, announces that it can supply a full line of OEM compatible, field-replacement CO2 laser optics supplied plain or mounted for popular marking and...

Slick Solutions for Friction Reduction

Reducing internal friction has always been a priority of powertrain designers, but recently the subject has taken on greater urgency in the crunch to meet tough new global CO2 regulations. In piston...

0T Series – Watertight Connector

LEMO USA, Inc., Rohnert Park, CA, introduces the 0T Series Connector, a small sized watertight connector using the same original LEMO Push-Pull technology. Based on the LEMO B Series, the 0T Series Connector...

Making Better EV Batteries — From the Bottom Up

After chemist Marina Safont sealed the door to the ultra-dry room in BASF’s Battery Material Lab, the air inside the cramped antechamber gradually grew arid, almost as if a desert Sirocco...

International Power Cords and Cord Sets

Qualtek, Mentor, OH, announces that it now fully stocks a comprehensive selection of 2- and 3-conductor North American power cords, international power cords, and hospital-grade power cords in various...

Amplicoat Conductive Coating for Medical Devices

Biotectix, Ann Arbor, MI, has introduced a highly durable electroconductive polymer coating called Amplicoat™, which incorporates Photolink®, a proprietary surface modification technology...

COMSOL Server

COMSOL, Inc., Burlington, MA, announces the release of COMSOL Server™, a new product developed specifically for running applications built with the Application Builder. COMSOL Server is the engine for running COMSOL apps and...

Hydraulics Still in Control of Off-highway Needs

Aggregations of electric vehicles will begin serving as “virtual power plants” to balance the electric grid by sourcing and absorbing power.

J Series Servo Motors

Applied Motion Products, Watsonville, CA, announces the latest extension to its servo motor lineup. The J series of low inertia, high performance servo motors are a cost effective choice for demanding automation...

DEF Delivery Modeling for SCR Systems

Aggregations of electric vehicles will begin serving as “virtual power plants” to balance the electric grid by sourcing and absorbing power.

27" LCD Medical Monitor

Sony Electronics, Park Ridge, NJ, introduces its new 27-inch surgical monitor combining high resolution, ease of use, and an extra slim design with the medical industry’s brightest panel, for use in operating rooms,...

Orion 200i2 Advanced Micro Welder

Sunstone Engineering, Payson, UT, unveils the Orion 200i2 advanced micro welder featuring advances in design and use that simplify all aspects of micro pulse arc welding. The Orion 200i2 introduces an...

Next-gen Nsx: A Twin-turbo, Multi-material Ferrari-fighter

Three years removed from its concept-design debut, the Acura NSX supercar took to the 2015 North American International Auto Show (NAIAS) stage once more, this time in its...

PC-DMIS 2014.1 Measurement Software

Hexagon Metrology, N. Kingstown, RI, has launched PC-DMIS 2014.1, a significant update of the popular measurement software to collect, evaluate, manage, and present manufacturing data. The new mid-term...

Off-highway Calibration Challenges — Big and Complex

The U.S. EPA Tier 4 Final emissions regulations are set for final phase-in during calendar year 2015. This final phase-in period focuses on large engines, producing greater than 560 kW...

Software Verification on VxWorks 7 Platform

LDRA, Wirral, UK, a leader in standards compliance, automated software verification, source code analysis, and test tools, has fully integrated the LDRA tool suite with the next generation Wind...

Qosina Stopcocks

Qosina, Edgewood, NY, announces that its stopcocks are offered in 1-, 2-, 3-, and 4-way fluid direction and 2, 3, 4, 5, and 6 gang manifolds. Connections include male luer slip, male luer lock, male luer with spin lock,...

Adhesives for Cartridge Dispensing

Epoxies Etc., Cranston, RI, has added three new fast-cure epoxies to the range of adhesive products suitable for use with TriggerBond® dispensing guns. The TriggerBond system packages an adhesive’s two...

Miniature Slide Guides

NB Corporation of America, Hanover Park, IL, announces the widest selection of miniature linear slide guides. All-stainless models are ideal for high temperature applications. Choose from retained-ball (whose elements...

OmniSeal Spring-Energized Seals

Saint-Gobain Seals, Garden Grove, CA, releases two new product handbooks: OmniSeal® spring-energized seals (US or EU) and Meldin® HT thermoplastic materials, which have been formatted and designed for...

PLC-Based Robotic Controls Versus OEM Robotic Controls

As more manufacturing facilities and distribution centers discover the benefits of robotic material handling solutions, the decision of how best to control the robot must be made. While...