Topic

Enabling Off-the-Shelf Autonomous Naval Warfare

The Navy is actively exploring emerging technologies that enable uncrewed aerial vehicles (UAVs) and uncrewed surface vehicles (USVs) to extend the range of its communications and electronic warfare (EW) capabilities. Read on to learn more about it.

Army Completes Satellite as a Managed Service Research Project

Intelsat has provided the U.S Army with new, flexible, and fully managed multi-orbit satellite communications (SATCOM) support, following the completion of the Army’s first-ever multi-vendor SATCOM as a Managed Service (SATaaMS) Pilot contract. Read on to learn more about it.

Autonomous Air Defense Production

Anduril Industries has been awarded a $249,978,466 contract to deliver advanced air defense capabilities across services for the Department of Defense (DoD). This contract will deliver more than 500 Roadrunner-Ms and additional Pulsar electronic warfare capabilities, addressing the growing threat of unmanned aircraft systems (UAS) attacks against U.S. forces. Read on to learn more.

Australian Air Surveillance Radar Upgrade

Sensor solutions provider Hensoldt has signed a contract with Space Centre Australia to deliver two high-performance Air Surveillance Radar - Next Generation systems (ASR-NG), along with a 20-year sustainment plan to bolster Australia’s critical air surveillance capabilities. Read on to learn more.

MUSHER Demonstrates Manned-Unmanned Aircraft Teaming Applications

Airbus Helicopters and its partners conducted a full scale demonstration of a manned-unmanned teaming (MUM-T) system developed as part of a project funded by the European Union and code-named “MUSHER.” The demonstration took place in France and Italy from Sept. 30 – Oct. 9, and involved multiple manned helicopters and unmanned systems connected to a single MUM-T network. Read on to learn more.

DEVCOM CBC Innovates and Integrates through Autonomous Technologies

Researchers and engineers at the U.S. Army Combat Capabilities Development Command Chemical Biological Center have developed a prototype system for decontaminating military combat vehicles. Read on to learn more.

Aviation Safety Expert Unites Industry to Safeguard Aviation Supply Chain

A new aviation supply chain integrity coalition has offered 13 recommended actions to prevent the circulation of non-serialized aircraft parts throughout the global aviation industry. Read on to learn more about the actions.

Scientists Fuse Simulations and Machine Learning to Accelerate Novel Additively Manufactured Materials

Researchers at the Johns Hopkins Applied Physics Laboratory have demonstrated a novel approach for applying machine learning to predict microstructures produced by a widely used additive manufacturing technique. Read on to learn more.

‘First of Its Kind’ Composite Material to Help Space Vessels Travel Longer Distances

Dr. Ashwath Pazhani along with an international team of researchers have created a new material for storing the liquid hydrogen used to propel rockets into space by the likes of NASA. The new material is lighter than the current material used. Read on to learn more about it.

AI-Trained Vehicles Can Adjust to Extreme Turbulence on the Fly

Researchers at Caltech took an important step toward using reinforcement learning to adaptively learn how turbulent wind can change over time, and then uses that knowledge to control a UAV based on what it is experiencing in real time.

What is Drone Jamming and How Can it Be Countered?

Deliberate RF jamming of drones has become one of the most common battlefield tactics in Ukraine. But what is jamming, how does it work and how can it be countered by unmanned aerial vehicles in the field? Read on to find out.

Researchers Use Ancient Japanese Art Method to Create Tunable Antennas

Researchers at Drexel University and the University of British Columbia believe kirigami, the ancient Japanese art of cutting and folding paper to create intricate three-dimensional designs, could provide a model for manufacturing the next generation of antennas. Read on to learn why.

These Speedy Cold Spray Machines Can 3D Print Vehicle Parts in War Zones

As “point of need” additive manufacturing emerges as a priority for the Department of Defense, Australian 3D printing provider SPEE3D is one of several companies demonstrating that its machines can rapidly produce castings, brackets, valves, mountings and other common replacement parts and devices that warfighters often need in an on-demand schedule when deployed near or directly within combat zones. Read on to learn more.

Analog Transformation Complements Open System Designs to Optimize Modern Defense Systems

Miniature, modular, and intelligent gateways can be embedded into analog components to replace and re-imagine old firmware and analog mitigation circuitry. These new, embedded gateways promise to bring open architecture deeper into the tactical edge and realize a new level of agility throughout the lifecycle of a system, from design through sustainment of hybrid digital and analog systems. Read on to learn more.

Acquiring and Telemetering Test Data from Hypersonic Platforms

Hypersonic aircraft and ordinance developments are becoming more common, and the unique vehicle designs present several challenges for flight test applications. Many of these challenges can be addressed using existing hardware and techniques. Read on to learn more about it.

How Pratt & Whitney Uses a Robot to Help Build Jet Engines

Kevin Kirkpatrick, Vice President of Aftermarket Global Operations, Pratt & Whitney, is the guest on this episode of the Aerospace & Defense Technology podcast.

Securing the Software-Defined Vehicle

Old car models with mechanical components are rapidly giving way to the increasingly software-defined vehicle (SDV) with features that not only allow drivers and passengers to stay connected to the...

My Opinion: Sustainability Depends on Understanding System Interrelationships

My Opinion: Sustainability depends on understanding system interrelationships. Read on to learn more about SAE Media Group's Ed Brown's opinion on the matter.

Making Software-Defined Vehicles Cyber-Secure

There is one sure-fire way to secure commercial vehicles from cyber-attacks. “You just remove the connectivity,” quipped Brandon Barry, CEO of Block Harbor Cybersecurity and the moderator...

The First Non-Electric Touchpad

Researchers at Tampere University have developed the world’s first soft touchpad that can sense the force, area, and location of contact without electricity. The device utilizes pneumatic channels, enabling its use in environments such as MRI machines and other conditions that are unsuitable for electronic devices.

European Aerospace Companies Developing Prototype AI to Protect Aircraft Systems

A total of 28 European aerospace industry partners, start-ups and research centers have joined forces on the new Artificial Intelligence Deployable Agent...

GKN Aerospace Reinvigorates Supply Chain to Deliver First C-27J Nacelles to Leonardo in Over 5 Years

GKN Aerospace announced the successful delivery of the first two C-27J nacelles to Leonardo Aircraft since 2018, marking a significant...

German eVTOL Company Needs Buyers to Keep Manufacturing Operations Alive

Lilium, the Munich, Germany-based electric vertical takeoff and landing (eVTOL) aircraft manufacturer, has appointed financial services firm KPMG to conduct an open,...

Accelerating Climate-Compatible Aircraft Design with AI

The path to climate-compatible flying involves energy-efficient aircraft, low-emission engines and optimized flight paths. Digitalization can accelerate these developments, for example...

Drug Delivery

November is national diabetes awareness month. What was the first so-called artificial pancreas approved for commercial use in the United States?

Toyota Tacoma’s Resin Seat Named SPE’s 2024 Best Automotive Plastic Innovation

The Society of Plastics Engineers (SPE) announced the winners of the 53rd annual Automotive Innovation Awards Gala (IAG) in mid-November, naming Toyota’s...