Stories
0
16170
30
Articles: Mechanical & Fluid Systems
This column presents technologies that have applications in commercial areas, possibly creating the products of tomorrow. To learn more about each technology, see the contact information provided for that innovation.
Articles: Aerospace
A new research project announced recently as a collaboration between the Georgia Institute of Technology and satellite communications provider Xenesis could help open the bottleneck...
Briefs: Materials
Marine-grade stainless steel is valued for its performance under corrosive environments, and for its high ductility — the ability to bend without breaking under stress. But conventional techniques...
Application Briefs: Photonics/Optics
BAE SystemsNashua, NH603-885-4321www.baesystems.com
The U.S. Defense Advanced Research Projects Agency (DARPA), through the U.S. Air Force Research Laboratory, has awarded BAE Systems a $13.1 million...
Briefs: Materials
When Navy SEALs carry out dives in Arctic waters, or when rescue teams are diving under ice-covered rivers or ponds, the survival time even in the best wetsuits is very limited — as...
Briefs: Energy
The Toxic Industrial Chemical/Toxic Industrial Material (TIC/TIM) Task Force MFR#1 published in February 2009 focuses on inhalation hazards in an operational environment and provides a list of...
Briefs: Electronics & Computers
Thermally Conductive Crystals Dissipate Electronics Heat
The inner workings of high-power electronic devices must remain cool to operate reliably. High internal temperatures can make programs run slower, freeze, or shut down. To address this issue, researchers have optimized the crystal-growing process of boron arsenide — a material that has...
Briefs: Software
Simulation Technique Models Material-Aging Process
The nation's aging infrastructure requires massive investment. Imagine if engineers could build structures with materials that do not degrade over time. A simulation technique was developed that could help engineers do just that.
Briefs: Electronics & Computers
Ultra-Low Power Consumption for Data Recording
New phase change material was developed that has electrical characteristics that behave differently than those of conventional materials. This new material provides a drastic reduction in power consumption for data recording in nonvolatile random access memory (RAM).
Briefs: Sensors/Data Acquisition
Microcontroller Altimeter (uCA)
Traditional altitude switch designs for harsh environments are mechanical in nature and operate by means of an inflatable bladder or bellows that mechanically depresses a pushbutton switch. The altitude trip point is set by mechanically adjusting the distance of the switch to the bellows. The mechanical action of the...
5 Ws: Sensors/Data Acquisition
Who
PHADE could be used by government agencies to enhance public safety; for example, the government can deploy cameras in high-crime or high-accident areas, and warn specific users about potential threats....
Briefs: Medical
Currently, concussion is measured by the symptoms someone experiences, but it is difficult to know what is happening in the brain in any one person. To address this problem, a portable brain imaging system was...
Briefs: Energy
Lithium-metal batteries — which can hold up to ten times more charge than lithium-ion batteries — haven't been commercialized because of a fatal flaw: as the batteries charge and...
Briefs: Medical
The most common methods for glucose self-testing involve monitoring glucose levels in blood. These conventional measurements are not suitable for preventing hypoglycemia during exercise. The underlying...
Articles: Sensors/Data Acquisition
After earning his doctorate, Debashish Roy set about creating a business from the biological imaging device he'd helped invent as a graduate student. The system held promise for...
Briefs: Medical
Silver nanowires have drawn significant interest in recent years for use in many applications ranging from prosthetic devices to wearable health sensors due to their flexibility,...
Briefs: Materials
Modification of SURFICE Code
As part of the continued thermal support for the Space Launch System (SLS) program, MSFC is constantly developing or modifying software tools to aid in analytical efforts to solve thermal issues and problems posed by the project. In some cases, existing software used by previous heritage programs provides an excellent...
Briefs: Materials
An effective, non-invasive way of monitoring blood glucose could help both diabetics and those at risk of developing diabetes make the right choices to either manage the disease well, or reduce their risk...
Briefs: Electronics & Computers
Researchers have observed waves of atomic rearrangements, known as phasons, propagating supersonically through a vibrating crystal lattice — a discovery that may dramatically...
Briefs: Materials
Hardface Coating Systems for Wear and Corrosion Resistance
Metal alloys, such as titanium alloys and steels, are known to have a good combination of mechanical properties for many structural applications, but these metal alloys do not meet the wear and corrosion resistance requirements for some structural applications. Titanium alloys, for example,...
Articles: Mechanical & Fluid Systems
By 2028, virtually all major sensing and feedback systems benefiting from continuous monitoring will connect to devices currently known as the Internet of Things (IoT). As that...
Briefs: Materials
An increase in computing performance has been achieved by squeezing ever more transistors into a tighter space on microchips. This downsizing has also meant packing the wiring within...
Briefs: Software
Comprehensive Software Simulation on Ground Special Power at Kennedy Space Center
As the number of channels, or operative sites, increases in present and future ground special power (GSP) development efforts, the amount of hardware required to test development codes becomes substantially expensive. By simulating/emulating the hardware, code...
Briefs: Electronics & Computers
A method was developed for printing 3D structures composed entirely of liquids. Using a modified 3D printer, threads of water were injected into silicone oil, sculpting tubes made of one liquid within...
Briefs: Semiconductors & ICs
Linear Resonators Make Electronics More Resistant to Damage and Defects
Mobile phones, tablets, and other portable devices are prone to failure caused by small defects in their complex electronics that can result from regular use. An innovation provides robust protection against circuitry damage that affects signal transmission.
Briefs: Electronics & Computers
Adhesives used for common pain-relieving bandages often do not stick properly when attached to places that encounter large, inhomogenous bending motion, like elbows and knees. To solve...
Products: Electronics & Computers
Cable Carrier
igus, East Providence, RI, offers the E4.1L general-purpose energy chain (e-chain) cable carrier with high dynamics that includes a honeycomb strain relief block. It also includes separators for quick...
Briefs: Materials
Spintronic devices promise to solve major problems in today's computers, which use massive amounts of electricity to generate heat. This requires expending even more energy for cooling. By contrast, spintronic...
NASA Spinoff: Green Design & Manufacturing
Spinoff is NASA's annual publication featuring successfully commercialized NASA technology. This commercialization has contributed to the development of products and services in the fields of health and...
Top Stories
INSIDER: Medical
Brain Implant Enables Safer Drug Delivery
Features: Medical
Built to Adapt: Rethinking Contract Manufacturing for a New Era
Features: Materials
OEM Toll Processing Advances High-Value Products
From the Editor: Medical
From The Editor: Charting the Technologies That Will Shape Medtech in 2026
INSIDER: Medical
Oxygen Scavenger Doubles Biosensor Performance
Features: AR/AI
Engineering for the Future: The Trends Transforming Medtech in 2026
Ask the Expert
Ralph Bright on the Power of Power Cords
Understanding power system components and how to connect them correctly is critical to meeting regulatory requirements and designing successful electrical products for worldwide markets. Interpower’s Ralph Bright defines these requirements and explains how to know which cord to select for your application.
Webcasts
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Medical
Developing Sustainable Drug-Delivery Devices
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
On-Demand Webinars: Manufacturing & Prototyping
Understanding Testing and Compliance Requirements for Wireless Medical Devices
Podcasts: AR/AI
Personalized Medicine and Drug Delivery
Podcasts: Green Design & Manufacturing
Inside Story
Inside Story: Trends in Packaging and Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.