Topic

Inside the OEM: Baxter

How does a 100-year-old medtech company evolve yet still retain its focus on the company’s original mission? Baxter has gone through many different phases and transformations. Now it is looking forward to its next...

Product of the Month

DC/DC Converter A series of high isolation 6 W DC/DC converters suitable for medical applications is available from Cosel, Tokyo, Japan. Packaged in a single in line (SIP) type 8, the MH6 series has a reinforce isolation...

Products of Tomorrow

This column presents technologies that have applications in commercial areas, possibly creating the products of tomorrow.

Executive Roundtable: Collaborative Robots

Will the adoption of cobots by SMEs accelerate in near future? What are the key challenges cobots need to overcome before they become ubiquitous?

Root of Trust: A Standardization Model that Needs to Happen Now

Billions of connected devices have been adopted within our personal eco-systems, rising two-fold during the pandemic. This means there are even more devices in our lives which can be attacked.

Future Wearable Health Tech Could Measure Gases Released from Skin

Scientists have taken the first step to creating the next generation of wearable health monitors.

Sensor Breakthrough Paves the Way for a Map of the World Under Earth’s Surface

The quantum gravity gradiometer was used to find a tunnel buried outdoors in real-world conditions one meter below the ground surface.

Ultrathin Pressure Sensor Attaches to Skin

By recording the way in which hands perform various tasks, it could help researchers in fields such as sports and medical science as well as neuroengineering.

Thin, Stretchable Biosensors Could Make Surgery Safer

Researchers formulated and synthesized the bio-inks, with the goal of creating create an ultra-soft, thin, and stretchable material for biosensors that is capable of seamlessly interfacing with the surface of organs.

Advanced Humanoid Robotic Hand Technologies

The R2 hand and forearm assembly is designed in a modular fashion, enabling rapid replacement of components and sub-assemblies.

Teaching Drones How to Navigate Real-World Weather

For drones to autonomously perform necessary but quotidian tasks, they must be able to adapt to wind conditions in real time.

Firefly-Inspired Robotic Lightning Bugs Take Flight

The ability to emit light also brings these microscale robots, which weigh barely more than a paper clip, one step closer to flying on their own outside the lab.

Corrugated Rollable Tubular Boom

NASA’s new COROTUB boom is flattened, rolled, and stowed in a small package for easy transport to remote locations. When unfurled, it expands into a load-bearing structural boom.

Tiny Motors to Power a Network of Nanomachines

Researchers from the Cockrell School of Engineering at The University of Texas at Austin recently created the first ever solid-state optical nanomotor.

Integral Tuned Mass Absorber for Turbine Blades

A novel turbine blade design and manufacturing approach developed by NASA provides a significant reduction in turbine blade resonant vibration.

Active Flow Control System for Simple-Hinged Flaps

This simple, elegant invention can control flow separation resulting from the high flap deflections required by simple-hinged flap systems making such flaps a viable option for aircraft designers.

Enhancing Solar Option During Power Outages

Engineers at the U.S. Department of Energy’s Argonne National Laboratory have designed a novel building-solar controller that optimizes solar energy with smart technology to keep microgrids operating for up to five days.

New Approach to Reducing EV Battery Testing Time

A new optimization framework created by researchers at University of Michigan could drastically reduce the cost of assessing how battery configurations will perform over the long haul.

Large Format Li-Ion Calorimeter

Innovators at NASA Johnson Space Center have developed a method to measure the total and fractional heat response of large format Li-ion cells (cells with capacities greater than 100Ah) when driven into...

Room-Temperature Liquid-Metal Battery

The researchers have created a “room-temperature all-liquid-metal battery,” which includes the best of both worlds of liquid-and solid-state batteries.

A Biodegradable Filtration System for Waste Metal Recovery

This invention is a method of removing or adsorbing a target substance or material.

Using AI to Help Scale Up Advanced Solar Cell Manufacturing

The system makes it possible to integrate data from prior experiments, and information based on personal observations by experienced workers, into the machine learning process.

Unprinting Method Removes Toner with Xenon Light

A new way to unprint paper uses intense pulsed light from a xenon lamp.

Organic Steam Generator Uses Sunlight to Purify Water

Researchers have developed an inexpensive and eco-friendly steam generator to desalinate and purify water using sunlight.

New on the Market: September 2022

New on the market in September 2022, including inductors, a snap-action switch, a stamped spring socket, and more.

Virginia Tech College of Engineering

From artificial intelligence, cybersecurity, and manufacturing to health sciences, robotics, and more, the Virginia Tech College of Engineering offers an advanced engineering curriculum.

Fundamental EV Battery Models Explain New Tab Design

Cylindrical cells are one of the most common battery types used in electric vehicles. Tesla recently improved on the typical cylindrical cell design, developing a new tab design that allows for a much larger cell.

Ultrasound Tech Offers Sophisticated Battery-Testing Intelligence

The production and supply of lithium-ion batteries for the global EV and stationary energy storage systems (ESS) markets is growing at an exponential rate. At the same time,...