Briefs: Electronics & Computers
A proposed complementary metal oxide/semiconductor (CMOS) photodiode integrated-circuit imaging device of the active-pixel-sensor (APS) type would include column feedback sub-circuits that...
Briefs: Electronics & Computers
An optoelectronic/digital flash x-ray imaging system has been invented for use in quantitative physiological studies and general radiology. The system could be implemented in a relatively...
Briefs: Electronics & Computers
A custom high-speed charge-coupled-device (CCD) camera that features a capability for real-time readout from multiple regions of interest (subwindows) within its field of view is undergoing...
Briefs: Electronics & Computers
A system of interface electronic circuitry that includes a data packetizer and a data depacketizer has been developed to enable the downlinking of both standard- and high-definition television (SDTV and HDTV) signals from a space shuttle or the International Space Station. The...
Briefs: Electronics & Computers
A stereoscopic machine-vision system offers a capability for robust tracking of objects in three dimensions (3D). The system is suitable for use in a variety of robotic applications. The system hardware includes a pan-tilt-verge camera and aiming mechanism assembly and a board that holds...
Briefs: Electronics & Computers
A high-efficiency, high-frame-rate ultraviolet (UV) charge-coupled device (CCD) camera that is especially well suited for biological and defense applications was developed. This is the...
Briefs: Electronics & Computers
The Data Acquisition and Control Systems (DACS) Laboratory is a facility at Stennis Space Center that provides an off test-stand capability to develop data-acquisition and control systems for...
Briefs: Electronics & Computers
The best-effort geographical multi-hop routing (BEGHR) protocol routes packets of data in an ad hoc digital radio-communication network on the basis of the current geographical...
Briefs: Information Technology
An investigation of nonlinear mathematical models of dynamics has led to the selection of characteristics that could be useful for distinguishing mathematically between the behaviors of (1) intelligent or living systems and (2) nonliving systems. As contemplated here, an intelligent or living...
Briefs: Information Technology
The title "Coupled Layer Architecture for Robotics Autonomy" (CLARATy) refers to a software architecture for robots that has been proposed to (1) improve the modularity of...
Briefs: Energy
Polymeric electrolytes for rechargeable lithium-based electrochemical cells and batteries would be made by blending and complexing cyanoresins with lithium salts, according to a proposal....
Briefs: Software
Performance Logging Services (PLS) is a software utility that tracks the performance of another program in terms of statistics of timing and use of memory buffers. The monitored program must utilize either the UNIX or the VxWorks operating system. PLS can monitor performance requirements in real...
Briefs: Software
HiMAP is an advanced, portable software system that implements highly modular, parallel computation of the possibly nonlinear, coupled behaviors of aeroelastic and other complex systems that comprise subsystems, each of which is modeled by use of software formulated within a separate...
Briefs: Software
The Integrated Composite Analyzer (ICAN) computer program, originally written in the FORTRAN language, has been completely recoded in Java to make it more widely usable. Whereas the original ICAN could be executed on only a limited number of platforms, ICAN/JAVA is compatible with almost all...
Briefs: Software
A system of software has been designed to enable autonomous operations of the three University-built miniature spacecraft of the Three Corner Sat mission, scheduled for launch in 2003. The main software subsystems and their functions are the following:
Briefs: Software
Mobile Router is operating system code residing in a network router allowing the router to provide mobile-ipv4 functionality for any attached nodes. Mobile Router enables the entire network to roam. It is no longer necessary for every node in the network to run mobile Internet Protocol (IP) software...
Briefs: Software
Release 3.0 of the Multi-Stage Runge-Kutta Circular Advection Solver is a computer program that solves the circular-advection problem by use of a general m-stage Runge-Kutta scheme (for m = 1, 2, and 4) on a Cartesian (x,y) grid with optimized coefficients. [The circular-advection problem, ¶u/¶t =...
Briefs: Software
A $90 million AUS (Australian dollar) upgrade ($49 million USD) to the Cronulla Sewage Treatment Plant in Southern Sydney, Australia, was undertaken to meet the requirements of a growing population and to add advanced sewage treatment processes including ultraviolet disinfection. During...
Briefs: Manufacturing & Prototyping
A micromachining-based fabrication process has been proposed for low-volume production of copies of a mesoscale vibratory gyroscope. The process would include steps of photolithography,...
Briefs: Manufacturing & Prototyping
A curved tile of refractory silica-fiber-based or alumina-fiber-based thermal-insulation material can be formed from an initially flat billet in a process that includes pressing against...
Briefs: Mechanical & Fluid Systems
A report presents a method of optimizing the orientations of three reaction wheels used to regulate the angular momentum of a spacecraft. The method yields an orientation matrix that minimizes mass, torque, and power demand of the reaction wheels while maximizing the allowable duration...
Briefs: Physical Sciences
The figure depicts selected aspects of a "smart" microelectronic-based hazardous-gas-detection system that simultaneously measures concentrations of hydrogen and oxygen. Unlike...
Briefs: Materials
Special foam pads have been developed for use in helmets. The foams in these pads have been formulated to obtain a combination of light weight, resistance to oxidation, flame retardance, superior shock-absorbing properties, and physical comfort during long use. In the original application, the pads are intended...
Briefs: Materials
Water-borne, silicone- based paints for protecting metal structures against corrosion have been developed as substitutes for traditional anticorrosion paints that contain large amounts of volatile organic solvents. It is desirable to reduce the volatile-organic-compound (VOC) contents of paints in...
Briefs: Software
SMARTSHELL is a finite-element computer program for analyzing composite-material propulsion-system structural components (including shells) that are characterized as “smart” because they contain integral piezoelectric sensors and/or actuators. The program implements a unique mixed-field...
Briefs: Materials
A γ titanium aluminide alloy produced by a powder-metal (PM) process, and techniques for fabricating sheets and sheet-metal components from the alloy, have been developed. The alloy and...
Briefs: Manned Systems
Pipes made of graphite-fiber/epoxymatrix composites have been shown to be suitable as conduits for liquid hydrogen. Conceived for as replacements for heavier metallic liquid-hydrogen feedlines in...
Briefs: Materials
Lightweight, refractory ceramic/carbon thermal-insulation materials have been invented. These materials, consist of carbon, silicon, and oxygen in suitable pro- portions combined into molecular structures that are stable at high temperatures. Insulating tiles and other components made of...
Briefs: Software
Strain Rate Dependent Analysis of Polymer Matrix Composites (STRANALPMC) is a computer program for analyzing strain-rate-dependent, nonlinear deformation and failure responses of composite materials in which the matrices are ductile polymers. Modified versions of the Ramaswamy-Stouffer...