Topic

Stories

0
44430
30
Briefs: Physical Sciences
Controlling Laser Spot Size in Outer Space
Three documents discuss a method of controlling the diameter of a laser beam projected from Earth to any altitude ranging from low orbit around the Earth to geosynchronous orbit. Such laser beams are under consideration as means of supplying power to orbiting spacecraft at levels of the order of tens of...
Briefs: Electronics & Computers
An electronic instrument has been developed as a prototype of a portable crane-load contact sensor. Such a sensor could be helpful in an application in which the load rests on a base in a horizontal position...
Feature Image
Briefs: Information Technology
Ontology-driven information integration (ODII) is a method of computerized, automated sharing of information among specialists who have expertise in different domains and who are members of subdivisions...
Feature Image
Briefs: Sensors/Data Acquisition
Optical Sensing of Combustion Instabilities in Gas Turbines
In a continuing program of research and development, a system has been demonstrated that makes high-speed measurements of thermal infrared radiance from gas-turbine engine exhaust streams. When a gas-turbine engine is operated under conditions that minimize the emission of pollutants,...
Briefs: Electronics & Computers
Thin, transparent layers comprising mats of carbon nanotubes have been proposed for providing lateral (that is, inplane) electrical conductivities for collecting electric currents from...
Feature Image
Briefs: Information Technology
Fuzzy/Neural Software Estimates Costs of Rocket-Engine Tests
The Highly Accurate Cost Estimating Model (HACEM) is a software system for estimating the costs of testing rocket engines and components at Stennis Space Center.
Briefs: Information Technology
Real-Time Principal-Component Analysis
A recently written computer program implements dominant-element-based gradient descent and dynamic initial learning rate (DOGEDYN), which was described in "Method of Real-Time Principal-Component Analysis" (NPO-40034) NASA Tech Briefs, Vol. 29, No. 1 (January 2005), page 59.
Briefs: Information Technology
NASA Records Database
The NASA Records Database, comprising a Web-based application program and a database, is used to administer an archive of paper records at Stennis Space Center. The system begins with an electronic form, into which a user enters information about records that the user is sending to the archive.
Briefs: Information Technology
Decision Support for Emergency Operations Centers
The Flood Disaster Mitigation Decision Support System (DSS) is a computerized information system that allows regional emergency-operations government officials to make decisions regarding the dispatch of resources in response to flooding.
Briefs: Medical
In the race to deliver drugs to market more quickly, biopharmaceutical companies need to classify and interpret data at unprecedented rates with tools that eliminate...
Feature Image
Briefs: Medical
Microwave Treatment of Prostate Cancer and Hyperplasia
Microwave ablation in the form of microwave energy applied to a heart muscle by a coaxial catheter inserted in a vein in the groin area can be used to heat and kill diseased heart cells. A microwave catheter has been developed to provide deep myocardial ablation to treat ventricular tachycardia...
Briefs: Materials
Modifications of a Composite-Material Combustion Chamber
Two short reports discuss modifications of a small, lightweight combustion chamber that comprises a carbon/carbon composite outer shell and an iridium/rhenium inner liner. The first report discusses chamber design modifications made as results of hot-fire tests and post-test characterization....
Briefs: Materials
Development of Carbon-Nanotube/Polymer Composites
A report presents a short discussion of one company's effort to develop composites of carbon nanotubes in epoxy and other polymer matrices.
Briefs: Materials
Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings
Multicomponent, rare-earth-doped, perovskite-type thermal-barrier coating materials have been developed in an effort to obtain lower thermal conductivity, greater phase stability, and greater high-temperature capability, relative to those of the prior thermal-barrier coating material of...
Briefs: Materials
Phenylethynyl containing reactive additive (PERA) compounds and mixtures have been found to be useful for improving the processability of oligomers, polymers, cooligomers, and copolymers...
Feature Image
Briefs: Test & Measurement
Wheel Electrometer System
The electrodes of this electrometer are embedded in a wheel of an exploratory robotic vehicle, utilizing the wheel motion to bring the electrodes into proximity or contact with the soil. Each electrode resides in one of two types of sensor modules: electric-field (ELF) or triboelectric (TRIBO). In either type, what is...
Briefs: Test & Measurement
Cryogenic High-Sensitivity Magnetometer
A proposed magnetometer for use in a cryogenic environment would be sensitive enough to measure a magnetic-flux density as small as a picogauss (10-16 Tesla). In contrast, a typical conventional flux-gate magnetometer cannot measure a magnetic-flux density smaller that about 1 microgauss (10-10 Tesla).
Briefs: Electronics & Computers
Aircraft and other vehicles are often kept in service beyond their original design lives. As they age, they become susceptible to system malfunctions and fatigue. Unlike future aircraft...
Feature Image
Briefs: Physical Sciences
A technique has been devised for measuring the relative humidity levels in the protective helium/water vapor atmosphere in which the Declaration of Independence, the United States Constitution, and...
Feature Image
Briefs: Test & Measurement
The figure shows a prototype of a relatively inexpensive electronic monitoring apparatus that measures and records selected parameters of lightning induced transient voltages on...
Feature Image
Briefs: Physical Sciences
Thermal Imaging of Earth for Accurate Pointing of Deep-Space Antennas
A report discusses a proposal to use thermal (long-wavelength infrared) images of the Earth, as seen from spacecraft at interplanetary distances, for pointing antennas and telescopes toward the Earth for Ka-band and optical communications.
Briefs: Physical Sciences
Shock Waves in a Bose-Einstein Condensate
A paper presents a theoretical study of shock waves in a trapped Bose-Einstein condensate (BEC).
Briefs: Electronics & Computers
Devices called “solid-state ferroelectric-based sources” (SSFBSs) are under development as sources of electrons, ions, ultraviolet light, and x-rays for diverse applications in...
Feature Image
Briefs: Physical Sciences
A dusty-plasma apparatus is being investigated as means of accelerating nanometer- and micrometer-sized particles. Applications for the dusty-plasma particle accelerators fall into two classes:
Feature Image
Briefs: Physical Sciences
Code for Analyzing and Designing Spacecraft Power System Radiators
A specific application is for Stirlingcycle/linear-alternator electric-power systems coupled to radioisotope general-purpose heat sources. GPHRAD affords capabilities and options to account for thermophysical properties (thermal conductivity, density) of either metal-alloy or...
Briefs: Physical Sciences
An improved miniature time-of-flight mass spectrometer has been developed in a continuing effort to minimize the sizes, weights, power demands, and costs of mass spectrometers for such diverse...
Feature Image
Briefs: Mechanical & Fluid Systems
An alternative method of controlled shifting of the center of mass has been proposed as a means of locomotion of a robot that comprises mostly a payload inside a hollow, approximately...
Feature Image
Briefs: Semiconductors & ICs
Improved Method of Manufacturing SiC Devices
The phrase, "common-layered architecture for semiconductor silicon carbide" ("CLASSiC") denotes a method of batch fabrication of microelectromechanical and semiconductor devices from bulk silicon carbide. CLASSiC is the latest in a series of related methods developed in recent years in continuing efforts...

Ask the Expert

Dan Sanchez on How to Improve Extruded Components
Feature Image

Improving extruded components requires careful attention to a number of factors, including dimensional tolerance, material selection, and processing. Trelleborg’s Dan Sanchez provides detailed insights into each of these considerations to help you advance your device innovations while reducing costs and speeding time to market.

Inside Story

Inside Story: Trends in Packaging and Sterilization
Feature Image

Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.