Products: Photonics/Optics
Newport Corporation (Irvine, CA) has introduced the Oriel IQE-200™, an instrument that permits simultaneous measurements of the external quantum efficiency (EQE) and the internal quantum efficiency (IQE) of...
Briefs: Materials
Silica-filled polymers made from ethylene propylene diene monomer (EPDM) have been found to be useful as ablative thermal-insulation materials. These polymers have been investigated as candidates to replace some previously developed polymeric ablative rocket-engine insulating materials...
Products: Photonics/Optics
Coherent (Santa Clara, CA) now offers a frequency tripled, diode-pumped, solid-state laser that performs cost-sensitive micromachining tasks such as scribing sapphire substrates used in the fabrication of...
Products: Photonics/Optics
The Falcon VGA300 HG, 1M120 HG, and 1.4M100 HG cameras from DALSA Corporation (Ontario, Canada) feature high-quality DALSA CMOS image sensors and are suitable for electronics inspection, semiconductor...
Products: Photonics/Optics
The Nunavut™ InGaAs Camera/Detector Line from BaySpec (Fremont, CA) enables low light spectroscopy in the near-infrared region. Optimal cooling of the detector allows for improved low-light spectral measurements,...
Products: Photonics/Optics
Electro-optical Products Corp. (Fresh Meadows, NY) has developed a laser safety (interlock) shutter that returns to the “off” position in case of power failure. The shutter consists of a blade mounted on a rotary...
Products: Photonics/Optics
RPMC Lasers (O’Fallon, MO) has introduced an industrial 50W picosecond laser suitable for manufacturers who need to drill or cut thin materials to produce components that should not be subjected to heat....
Products: Photonics/Optics
Photonic Products (Hertfordshire, UK) has released a new range of variable focus industrial laser diode modules that offer high boresight accuracy of The modules also feature either a standard elliptical...
Products: Photonics/Optics
ALPAO (Biviers, France) has developed the Hi-Speed DM37, with optimized temporal response, large stroke, and high linearity. Designed for applications requiring large corrections with a small optical beam, this...
Products: Photonics/Optics
Edmund Optics (Barrington, NJ) has introduced continuously variable apodizing filters designed to eliminate undesirable intensity variations and create an even illumination profile in optical systems. The...
Products: Photonics/Optics
A fiber-coupled, multi-bar module from DILAS (Tucson, AZ) delivers 300W through a cladding mode free QBH high-power 200-μm core diameter fiber with a low numerical aperture of 35%. The modules are packaged in up...
Products: Photonics/Optics
New Scale Technologies (Victor, NY) has introduced custom auto focus modules that install directly on board-mounted cameras and accept standard threaded lens assemblies. The compact lens motion module...
Products: Photonics/Optics
The SPMArray from sensL (Cork, Ireland) is the first four-side scalable low-light-detecting silicon photomultiplier array for use in markets such as medical imaging, homeland security, radiation...
Products: Photonics/Optics
EPIX (Buffalo Grove, IL) has introduced a PIXCI SI1 frame grabber that allows image and control data transfer with minimal buffering over any PCI Express slot for low latency image capture and analysis. Featuring 190...
Products: Photonics/Optics
TRUMPF (Farmington, CT) has unveiled the TruMark 5020, a new fiber laser marker that is suited for applications on metals and plastics with high speed and edge quality requirements. With high pulse frequencies and...
Products: Photonics/Optics
Nextreme Thermal Solutions (Durham, NC) and Infinite Power Solutions (Denver, CO) have developed a thermal charger with the ability to continuously recharge the IPS THINERGY ™ Micro-Energy Cell (MEC)...
Products: Photonics/Optics
Fianium (Eugene, OR) has introduced the FP1060-HE high-energy fiber laser that delivers pulse energies in excess of 10 μJ and pulse durations below 20 ps. The laser platform is suitable for challenging materials...
Briefs: Physical Sciences
An acousto-optic cryogenic flow sensor (CFS) determines mass flow of cryogens for spacecraft propellant management. The CFS operates unobtrusively in a high-pressure, high-flowrate cryogenic environment to provide measurements for fluid quality as well as mass flow rate. Experimental hardware uses an optical...
Briefs: Physical Sciences
Robust mud detection is a critical perception requirement for Un manned Ground Vehicle (UGV) auton omous offroad navigation. A military UGV stuck in a mud body during a mission may have to be sacrificed or rescued,...
Briefs: Physical Sciences
This system provides a portable means to detect gas flow through a thin-walled tube without breaking into the tubing system. The flow detection system was specifically designed to detect flow through two parallel branches of a manifold with only one inlet and outlet, and is a means for verifying a space shuttle program...
Briefs: Physical Sciences
An improved method of mapping the capacitive contribution to cross-talk among pixels in an imaging array of sensors (typically, an imaging photodetector array) has been devised for use...
Briefs: Physical Sciences
A fiber-based laser transmitter has been designed for active remote-sensing spectroscopy. The transmitter uses a master-oscillator- power-amplifier (MOPA) configuration with a distributed feedback diode-laser master oscillator and an erbium-doped fiber amplifier. The...
Briefs: Physical Sciences
A single-aperture, low-profile antenna design has been developed that supports dual-polarization and simultaneous operation at two wavelengths. It realizes multiple beams in the elevation plane, and supports radiometric, radar, and conical scanning applications.
Briefs: Physical Sciences
A method allows combining the functions of a heater and a thermometer in a single device, a thermistor, with minimal temperature read errors. Because thermistors typically have a much smaller thermal mass than the objects they monitor, the thermal...
Briefs: Electronics & Computers
The cellular reflectarray antenna is intended to replace conventional parabolic reflectors that must be physically aligned with a particular satellite in geostationary orbit. These arrays are designed for specified...
Briefs: Electronics & Computers
The power and communications module is a printed circuit board (PCB) that has the capability of providing power to an embedded processor and converting Ethernet packets into serial data to transfer to the processor. The purpose of the new design is to address the shortcomings...
Briefs: Electronics & Computers
A two-dimensional synthetic-aperture radiometer, now undergoing development, serves as a test bed for demonstrating the potential of aperture synthesis for remote sensing of the Earth, particularly for measuring spatial distributions of soil moisture and ocean-surface salinity. The goal is to use the...
Briefs: Electronics & Computers
A proposed one-dimensional synthetic-aperture microwave radiometer could serve as an alternative to either the two-dimensional synthetic-aperture radiometer described in the immediately...
Briefs: Electronics & Computers
Electronic devices that exploit electrical switching of physical properties of thin films of perovskite materials (especially colossal magnetoresistive materials) have been invented. Unlike some related prior devices, these devices function at room temperature and do not depend on externally...