Briefs: Mechanical & Fluid Systems
For commercial, military, and aerospace applications, low-cost, small, reliable, and lightweight gas and liquid hermetically sealed valves with post initiation on/off capability are highly desirable for pressurized systems. Applications include remote fire suppression, single-use system-pressurization systems,...
Briefs: Mechanical & Fluid Systems
Airborne and space infrared cameras require highly flexible direct cooling of mechanically-sensitive focal planes. A thermal electric cooler is often used together with a thermal strap as a means to transport the...
Briefs: Mechanical & Fluid Systems
Vibration dampers have been invented that are incorporated as components within the stationary labyrinth seal assembly. These dampers are intended to supplement other vibration-suppressing features of labyrinth seals in order to reduce the incidence of high-cycle-fatigue failures, which have been known to...
Briefs: Mechanical & Fluid Systems
An explosive bolt has been developed that has a one-sided dual initiation train all the way down to the pyro charge for high reliability, while still allowing the other side of the bolt to remain in place after actuation to act as a thermal seal in an extremely high-temperature environment. This...
Briefs: Mechanical & Fluid Systems
A winch system provides a method for launch and recovery capabilities for kites and tethered blimps or balloons. Low power consumption is a key objective, as well as low weight for portability. This is accomplished by decoupling the tether-line storage and winding/ unwinding functions, and...
Briefs: Physical Sciences
The quality of images generated during an infrared thermal inspection depends on many system variables, settings, and parameters to include the focal length setting of the IR camera lens. If any relevant parameter is incorrect or sub-optimal, the resulting IR images will usually exhibit inherent...
Briefs: Physical Sciences
A hybrid photochemical-machining process is coupled with precision stack lamination to allow for the fabrication of multiple ultra-high-resolution grids on a single array substrate. In addition, special fixturing and etching techniques have been developed that allow higher0resolution multi-grid...
Briefs: Physical Sciences
The requirement for scatterometer-combined transmit-receive gain variation knowledge is typically addressed by sampling a portion of the transmit signal, attenuating it with a known-stable attenuation, and coupling it into the receiver chain. This way, the gain variations of the transmit and...
Briefs: Information Technology
The push-pull framework was developed in hopes that an infrastructure would be created that could literally connect to any given remote site, and (given a set of restrictions) download files from that remote site based on those restrictions.
Briefs: Information Technology
Space weather is described as the variability of solar wind plasma that can disturb satellites and systems and affect human space exploration. Accurate prediction requires information of the heliosphere inside the orbit of the Earth. However, for predictions using...
Briefs: Information Technology
A random-force method has been developed to predict dynamic loads produced by rocket-engine random vibrations for new rocket-engine designs. The method develops random forces at multiple excitation points based on random vibration environments scaled from accelerometer data...
Briefs: Information Technology
The problem of global maxima of functionals has been examined. Mathematical roots of local maxima are the same as those for a much simpler problem of finding global maximum of a multi-dimensional function. The second problem is instability — even if an optimal trajectory is found, there is no...
News: Energy
A team of students from Virginia Tech University won EcoCAR: The NeXt Challenge after designing and building an extended-range electric vehicle (EREV) using E85 (ethanol). Virginia Tech competed against 15...
News: Energy
Chemistry researchers at the University of Adelaide, Australia are exploring how metal nanoparticles act as highly efficient catalysts in using solar radiation to split water into hydrogen and oxygen.
Question of the Week
This week's Question: In a preliminary report from the International Programme on the State of the Ocean, a scientific panel concluded that ocean degeneration is happening much faster than previously predicted, and that the combination of factors currently distressing the marine environment is contributing...
INSIDER Product: Motion Control
STMicroelectronics (Geneva, Switzerland) offers new resources for users to simplify design and speed up development of intelligent motor drives for applications such as white goods, air conditioners, industrial...
INSIDER Product: Electronics & Computers
Mentor Graphics Corporation (Wilsonville, OR) offers a unified embedded software debugging platform, from pre-silicon to final product, based on the integration of the Mentor® Embedded Sourcery™ CodeBench embedded software development tools with Mentor’s electronic system level (ESL), verification, and...
INSIDER Product: Electronics & Computers
VISTAGY, Inc. (Waltham, MA) has released the Seat Design Environment™ 2011 (SDE), which improves the automatic generation of documents so manufacturers can efficiently create more of the engineering and manufacturing...
INSIDER Product: Electronics & Computers
MathWorks (Natick, MA) announced a new version of SimDriveline that simplifies the integration of other physical domains into drivetrain models, including thermal losses in geartrains,...
News: Transportation
New technology is being developed at Oregon State University to capture and use the low-to-medium grade waste heat from automobiles, diesel generators, or factories and...
Products: Lighting
iWatt (Los Gatos, CA) introduces the iW7032 LED backlight driver to power up to 32 parallel strings of LEDs for high-performance direct and segment-edge LED TV backlighting. iWatt’s adaptive switching...
News: Green Design & Manufacturing
Neutron analysis of the atomic dynamics behind thermal conductivity is helping scientists at the Department of Energy's Oak Ridge National Laboratory (ORNL) gain a deeper...
Blog
As you can probably tell by what I do for a living, I have a good command of the English language. Unfortunately I do not have similar skills when it comes to mastering other languages.
I took two years of high school Spanish and still have trouble ordering lunch in a Mexican restaurant. My wife was born...
News: Green Design & Manufacturing
University of Minnesota researchers have developed an innovative approach to tapping heat beneath the Earth’s surface. The method is expected to not only produce renewable...
Briefs: Energy
An important aspect of wind power plant impact studies is to evaluate the short-circuit current (SCC) contribution of the plant into the...
Videos: Energy
Remote villages without access to the power grid must rely on diesel or petroleum generators for electricity, which means they have power only when they can get fuel. Windlift develops...
Videos: Energy
Marine Innovation & Technology (MI&T) used digital prototyping software from Autodesk to develop the WindFloatTM - a small, floating platform capable of supporting large offshore wind...
Videos: Energy
TE Connectivity (Harrisburg, PA) offers the UL 1741-Listed pre-wired SOLARLOK combiner box for solar panel installations. The five-string combiner box offers 30-second, error-proof terminations through...