Topic

Packaging of MMIC LNA (monolithic microwave integrated circuit low-noise amplifier) chips at frequencies over 200 GHz has always been problematic due to the high loss in the transition between the MMIC chip and the waveguide medium in which the chip will typically be used. In...

The purpose of this innovation is to enhance nucleation of single-wall nanotubes (SWNTs) in the HiPco process, selectively producing 10,10 tubes, something which until now has not been thought possible.

Dr. Greg Chavers, test lead at the Marshall Space Flight Center in Huntsville, Alabama, helped to design the “Mighty Eagle” robotic prototype lander. The vehicle, which can guide itself to a specified target, flew “open loop” to an altitude of 100 feet in late August.

A new composite material of singlewalled carbon nanotubes (SWNTs) displays radio frequency (0 to 1 GHz) permittivity properties that can be adjusted based upon the nanotube composition. When varying ratios of raw to functionalized SWNTs are blended into the silicone elastomer matrix at a...

An organic polybutadiene (PB) rubber-based aerogel insulation material was developed that will provide superior thermal insulation and inherent radiation protection, exhibiting the flexibility, resiliency, toughness, and durability typical of the parent polymer, yet with the low density and superior insulation properties...

At low operating temperatures, commercially available electrode materials for lithium-ion batteries do not fully meet the energy and power requirements for NASA’s exploration activities. The composite cathode under development is projected to provide the required...

Designs incorporating variations in capillary geometry and hydrophilic and/or antibacterial surface properties have been developed that are capable of passive gas/liquid separation and passive water flow. These designs can incorporate capillary grooves and/or surfaces arranged to create linear...

A stowage system was conceived that consists of collapsible, reconfigurable stowage bags, rigid polyethylene or metal inserts, stainless-steel hooks, flexible photovoltaic materials, and webbing curtains that provide power generation, thermal stabilization, impact...

This invention relates to non-contact spectroscopic methods and apparatus for performing chemical analysis and the ideal wavelengths and sources needed for this analysis. It employs deep ultraviolet (200- to 300-nm spectral range) electron- beam-pumped wide bandgap semiconductor lasers,...

To date, it has not been possible to apply 3D sonic anemometers on tethersondes or similar atmospheric research platforms due to the motion of the supporting platform. A tethersonde module including both a 3D sonic anemometer and associated motion correction sensors...

Space exploration will require new life support systems to support the crew on journeys lasting from a few days to several weeks, or longer. These systems should also be designed to reduce the mass required to keep humans alive in space. Water accounts for about 80 percent of the daily mass intake...

A concept has been developed for a geostationary seismic imager (GSI), a space telescope in geostationary orbit above the Pacific coast of the Americas that would provide movies of many large earthquakes occurring in the area from Southern Chile to Southern Alaska. The GSI movies would cover a field of view as long as...

A low-cost beamformer phased array antenna has been developed for expendable launch vehicles, rockets, and missiles. It utilizes a conformal array antenna of ring or individual radiators (design varies depending on application) that is designed to be fed by...

A protocol was developed as a first step in analyzing the complex organic aerosols present on Saturn’s moon Titan, as well as the analogues of these aerosols (tholins) made on Earth. Labeling of primary amines using Pacific Blue™ succinimidyl...

NASA’s Mars Science Laboratory (MSL) Rover, which launched to Mars in 2011, is equipped with a set of 12 engineering cameras. These cameras are build-to-print copies of the Mars Exploration Rover (MER) cameras, which were sent to Mars in 2003. The engineering cameras weigh

Several L-band microwave radiometer and radar missions have been, or will be, operating in space for land and ocean observations. These include the NASA Aquarius mission and the Soil Moisture Active Passive (SMAP) mission, both of which use...

A study by the Georgia Institute of Technology indicates that older adults are willing to use robots for the daily activities that become more challenging with age, unless the tasks involve personal care or social activities. After showing adults (ages 65 to 93 years) a...

View the winning entries of the 2012 Photography Competition at the University of Cambridge Department of Engineering, which was sponsored by optical systems manufacturer Carl Zeiss, and learn about the fascinating stories behind them.

Happy Halloween! Here is the latest news from the medical products community.

It's almost Halloween and, to honor that, there’s news that researchers at The University of Manchester in the UK have demonstrated that a technology that can analyze millions of gene sequences can quickly and accurately identify diseases even in old skeletons. The scientists used a next...

Great news for the end of Breast Cancer Awareness Month! Scientists say that they have developed a technology to produce 3D x-ray breast images with a radiation dose much lower than the currently used 2D radiography. This new method enables the production of 3D diagnostic computed tomography (CT) images...

A team of researchers brought a pair of scale model space capsules to the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida to try out a rotor system that could be used in place of parachutes on returning spacecraft.