Topic

Conventional Shack-Hartmann Wavefront Sensing requires a point source such as a star to perform wavefront sensing. This software allows one to conduct such sensing using an extended-scene or scene-based image. The software allows a Shack-Hartmann Wavefront Sensor (SH-WFS)...

On occasion, anomalies in the highly dynamic test data obtained during rocket engine tests may appear. These issues must be investigated, and corrective action is generally mandated before testing resumes; usually only three days are allotted to identify and correct the issues. Spurious signals in...

The enormous strength of unidirectional carbon fiber composite rods is difficult to take advantage of at their ends because of inadequate joining technology. Bolting does not work with unidirectional composites, and bonding is difficult due to stiffness mismatches...

Recently, one-dimensional (1-D) nanostructures such as nanowires and nanotubes have become the focal point of research in nanotechnology due to their fascinating properties. These properties are intrinsically associated with low dimensionality and small diameters, which may lead to unique...

This innovation is a sub-nanosecond time-interval measurement that is compact and inexpensive, implemented in a field-programmable gate array (FPGA). Currently, high-speed count ers or semi-custom or custom ASICs (application specific integrated circuits) are used for time-interval...

The present invention addresses the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in...

This method provides control over the growth density of carbon nanotubes (CNTs) on a relatively coarse scale, with density adjustment over several orders of magnitude, using an applied electrical field or voltage difference that is aligned substantially perpendicular to the substrate surface, which is adjacent...

NASA missions employing mobility systems and other moving mechanical assemblies for application on Mars, the Moon, and in deep space depend on the reliable operation of these assemblies and their tribological components. Wet lubricants...

Future manned spacecraft and lunar or Mars outposts will need a condensing heat exchanger (CHX) to control humidity in the cabin atmosphere. Condensing surfaces must be hydrophilic to control condensate flow and ensure efficient operation in zero gravity, and biocidal to...

The idea of turning the stickiness of a material on and off is not an intuitive concept, yet this is exactly how geckos run up walls at speeds greater than 1 m/s and cling to ceilings made of glass. Transitioning this capability to spacecraft would constitute...

Two coatings are required to remove/repel lunar dust particles from the mechanism or surface that needs protection. One coating must be a conductor, and one must be a dielectric. Tungsten carbide (WC) and aluminum oxide (Al2O3) were found to be best...

A six-degrees-of-freedom (DOF) testbed was developed for evaluating microgravity and low-gravity proximity and contact operations, e.g. in the vicinity of a near Earth orbit, for simulation of proximity operations for a human mission to an asteroid. This is accomplished using an “inverted Stewart platform” where the...

Electromagnetic motors can have problems when operating in extreme environments. In addition, if one needs to do mechanical work outside a structure, electrical feedthroughs are required to transport the electric power to drive the motor. Piezoelectric motors can be designed...

A new device detects the heartbeat and respiration of victims trapped in rubble or disaster debris, and reduces the time required to initiate a rescue. Searchers would like to distinguish live victims from those who have died recently and to distinguish humans from animals. In addition to search and rescue, there are other uses...