Topic

Nanosensors have been developed for chemical detection using carbon nanotubes (CNTs). Unlike other chemical sensors, this solid-state approach requires no reagents and can be refreshed with a solid-state ultraviolet (UV) diode. The sensors possess high sensitivity (ppbv), fast...

Chemical sensors have been developed over the past decades to detect gases and vapors at various concentration levels for deployment in a wide range of industrial applications. The detection usually centers on a change of a particular property or status of the...

Amperometric electrochemical sensors are commonly used for the detection of carbon monoxide (CO) and hydrogen (H2) in air. The electrochemistry of heterogeneous CO and H2 oxidations is similar enough that the sensors show significant cross-sensitivities between the two gases. Thus, in...

Several methods are presently being developed to sense the presence of a target molecule in small or modest concentration in a fluid. However, estimation of the concentration of the target molecule is unavailable where the fluid is substantially motionless...

This floating ultrasonic transducer inspection system is based on a “momentary touching” scheme wherein the ultrasonic transducer is in contact with the structure being scanned for a relatively short time while performing the measurement. A vibrating element is a...

A miniaturized Schottky diode hydrogen and hydrocarbon sensor with the structure of catalytic metal-metal oxide-silicon carbide (SiC) has been developed. The major innovation of this work is the use of the metal oxide, palladium oxide (PdOx), as a...

Galvanic isolated monitoring of voltages for launch vehicle, missiles, and space-deployed systems can be very challenging. Radiation exposure makes use of optics-based sensors difficult, as they can latch-up and become corrupted by the radiation environment; such devices can moreover be thermally challenged....

The means to make a flexible and/or erectable magnetic field response sensor, a geometrically fixed capacitor mounting frame, a wireless dipstick, and an elastically flexible capacitor support have been developed. Either the capacitor mounting frame or the flexible, erectable magnetic field...

The in situ production of vital gases and raw materials on the lunar surface is an integral part of NASA’s exploration vision. Development of processes for extraction of oxygen and metallics from the lunar regolith will be vital not only for life support on the lunar surface, but also...

This invention establishes a process to define a viable self-reacting friction stir weld (SR-FSW) schedule (parameter settings) for a given material combination. The focus of this process results in a SR-FSW schedule that is insensitive to intentional changes or normal process...

Better thermal insulation is needed to insulate cryogenic propellants used by NASA for launch vehicles, spacecraft, and orbiting fuel depots. In particular, cryotank insulation during in-air pre-launch and launch ascent stages currently uses...

The utility of this invention is to extract metals (semi-metals) or semiconductors from bulk nanotube samples. The bulk material is a mixture of the two. These materials can then be used to clone a particular type of nanotube, place a particular type in a device, generate smart materials,...

The current baseline ablator material for the Advanced Development Program (ADP) for the thermal protection system (TPS) of the Orion heat shield is phenolic impregnated carbon ablator (PICA). PICA is a low-density, low-strength material that must be isolated from mechanically and thermally induced deformations and strains of the...

Ambient air insulation systems for low-temperature (sub-ambient) applications are difficult to achieve because of moisture ingress and environmental degradation, as well as thermal stress-cracking. Most currently accepted methods for externally applied outdoor environments are...

A highly reflective, white conductive coating system was developed using various layered coatings to maximize the structural, electrical, and optical reflectance properties for spacecraft radiators. The top layer of the system contains a highly reflective white pigment within a dissipative...

Future-generation materials for use on space transportation vehicles require substantial improvements in material properties, leading to increased reliability and safety, as well as intelligent design to allow for current materials to meet future needs. Ultra-high-temperature...

In the process of recovery and regeneration of cabin atmosphere to supply oxygen to facilitate extended-duration manned missions, including expeditions to Mars or a return to the Moon, one of the byproducts of this reaction is waste methane, which is vented into space. This...

Liberation of oxygen from the mineral ilmenite (FeTiO3), which may be found on the Moon, Mars, or asteroids, is inefficient due to the abundance of other minerals in the excavated regolith that are present but not needed during the chemical processing....

The autonomous self-healing (eDNA) hardware platform is a reconfigurable field-programmable gate-array (FPGA)-type platform developed by Technical University of Denmark (patent: WO/2010/060923). It is capable of autonomously reconfiguring itself in case a fault is detected...

GPS receivers must compensate for the delay a GPS signal experiences as it passes through the ionosphere in order to accurately determine the position of the receiver. Receivers limited to terrestrial operation may utilize the Klobuchar parameters transmitted by...

Wafer-level integration was employed to mount the microshutter array for the James Webb Space Telescope (JWST) and the detector-read-out hybrid for TIRS (Thermal Infrared Sensor). In the case of the JWST substrate, two conductors (polysilicon and aluminum) separated by a silicon oxide...

A concept was developed for a multi-gigabit-rate, radiation-hardened (RH) bus that would support open-system architecture and provide a cost-effective, high-speed interconnect. This concept is based on Advanced Science and Novel Technology Company’s SerDes system, which supports a variety of interfaces, and...

A concept for recovering reusable spacecraft or capsules, or reusable rocket boosters, has them land on an airbag-based, cushioned platform positioned on a highly maneuverable hovercraft. This landing method would have performance advantages over conventional approaches to reusability by placing most of the landing...