Topic

A thin-film magnetic thermometer with integrated, superconducting quantum interference device (SQUID) readout has been designed for fast, precision temperature measurements in the 10-mK range. The compact magnetic thermometer consists of a miniature DC SQUID susceptometer with a...

Large axial load forces and extreme temperature ranges are typical for scientific balloon missions. Therefore, a durable, flexible, and thermally stable sensor material is needed. In this innovation, sensors have been designed to be integrated onto...

A miniature, low-power, solid-state detector for ionizing radiation was developed for use in more locations, and requiring less space and lower power than current technology. An accepted way of counting high-energy charged particles common in space radiation is to detect the light...

The accuracy of spaceborne sensors measuring reflected solar radiance can be affected by multiple factors. First, instruments with complex optics are sensitive to polarization. The response of such instruments is characterized before launch; however, sensitivity to polarization can change on orbit...

Stennis Space Center (SSC) is one of three government-operated rocket engine test facilities in the United States and is the primary center for testing and flight-certifying rocket propulsion systems for future space vehicles. Safety...

The PATTERNS scheduling tool was created to test the multi-plane concept of a Time Triggered Ethernet (TTE) network. The TTE network interface cards used in the Orion vehicle contain three physical network ports, referred to as planes. Each plane exists to serve...

The transformation of naturally occurring electromagnetic waves called “chorus” from a coherent nature to a quasi-coherent nature when propagating a distance from its source was demonstrated. The aim of the mission was to study the energizing of electrons by the waves...

The Soil Moisture Active Passive (SMAP) mission will have the first L-band radar/radiometer sensor suite dedicated to global measurements of soil moisture. For the radar sensor, the requirements for achieving high backscatter measurement accuracy from low-Earth orbit present a...

A wireless, connection-free, open circuit technology can be used for developing electrical devices like sensors that need no physical contact with the properties being measured. At the core of the technology is the SansEC (Sans Electrical Connections) circuit that is damage-resilient and...

The UAVSAR (Uninhabited Aerial Vehicle Synthetic Aperture Radar) ground data processing infrastructure facilitates a wide range of mission operational processes through a centralized database, Web-enabled interfaces, and background automation. By...

Efficient aircraft designs are increasingly desired in order to support the continued growth of the air transportation industry. Continued expansion of this vital mode of transportation is threatened due to concerns over ever-increasing emissions, noise, and the demand for fuel. Current airport runway,...

A novel automated table lookup method is developed to compute the near-fuel-optimal powered descent guidance trajectories, in real-time, for planetary soft landing. The main advantage of this algorithm is that it can be executed autonomously in...

A lightweight, robust fiber-optic system is the technology behind a new method to compute wing deflection and slope from measured strain of an aircraft. This state-of-the-art sensor system is small, easy to install, and fast, and offers the first-ever means of obtaining real-time strain...

An integrated communications and control system for unmanned aircraft systems (UAS) utilizes automatic dependent surveillance broadcast (ADS-B) technology. The prime objective of this system is to address safety concerns related to UAS sharing airspace with...

Bandwidth and power-coded modulation schemes are very desirable for many applications in high-data-rate transmission over a given allocated bandwidth. The goal is to design such coded modulation system for a given throughput with the lowest possible signal-to-noise ratio for not only a channel...

LDSD (Low Density Supersonic Decelerator) is a Mars EDL (entry, descent, and landing) Technology Development Project that launches three test vehicles out of the Pacific Missile Range Facility in Kauai. On the test vehicle, most mission science data can be recorded safely on land;...

In industrial synthetic chemistry laboratories, reactions are generally carried out using batch-mode methodologies, stepwise reactions, and purifications to generate a final product. Each step has an associated yield of both the reaction itself and of the final purification that...

The guarded flat plate insulation test cryostat (Cryostat-500) is a boil-off calorimeter comprising a flat-bottom test apparatus for measuring the absolute thermal performance of an insulation test article. Typical dimensions allow accepting test specimens 200 mm in diameter by up to 30 mm thick. The test...

Powder coatings are used throughout industry to paint a myriad of metallic objects. This method of coating has gained popularity because of its conservation of materials and elimination of volatile organic compounds (VOCs). Resins used in powder coatings are traditionally chosen from those that have low...

This invention is a process by which carbon nanotubes can be chemically functionalized according to their precise electronic structure. The process involves an exploitation of charge transfer stability at the nanotube sidewall to direct selective reaction of certain electronic structures over others....

Atmospheric corrosion is significantly accelerated by the presence of heat, humidity, corrosive salts, and sunlight. At Kennedy Space Center (KSC), all of these accelerants are present, producing an extremely corrosive environment. Toxicity and environmental impacts of some inorganic...