Topic

For certain semiconductors with important applications, the existing bulk crystal growth technique from the melt usually results in poor-quality multi-crystalline ingots that cause the typically low yield of the commercial growth process. The...

Development of biosensors is an active field due to a wide range of applications in lab-on-a-chip, diagnostics of infectious diseases, cancer diagnostics, environment monitoring, biodetection, and others. One of the strategies used for selective identification of a target is to preselect a probe...

This software computes a single-phase turbulent flow. The solution is independent of the grid spacing on which it is computed, and on the discretization order used for the differential equations. Grid spacing and discretization-order independence can be achieved by reformulating the large-eddy...

This software computes two-phase turbulent flows with phase change, and the solution is independent of the grid spacing on which it is computed and on the discretization order used for the differential equations. Grid spacing and discretization-order independence can be achieved...

This software provides a toolbox of MATLAB functions for detecting precursor wiring faults, such as chafing, in shielded impedance-controlled cable using measurements from off-the-shelf time domain reflectometry or vector network analyzer hardware. It advances the state-of-the-art in...

The Pegasus software is used as a pre-processor for overset-grid computational fluid dynamic (CFD) simulations. The main features of the software include: automated hole cutting algorithms; a projection scheme for fixing small discretization errors in overset surfaces; efficient...

The NASA Langley Aeronautics Systems Analysis Branch (ASAB) is heavily involved in research studies to evaluate new and emerging concepts targeted at improving the National Airspace System (NAS). The primary tool used by ASAB to perform these studies is the Airspace Concept Evaluation System (ACES), a medium-fidelity, NAS-wide...

The current flight software approach is monolithic in nature. Every module has tentacles that reach deep within dozens of other software modules. Because of these interdependencies between modules, functionality is difficult to extract and reuse for other missions.

This software conducts preliminary design studies for spacecraft missions. It supports a collaborative work environment that allows multiple engineers to work simultaneously on the same design. When designing a spacecraft or mission, it is important that each engineer has concurrent...

In the context of systems health management, simulations serve many uses. For one, the underlying physical models can be used by model-based health management tools to develop diagnostic and prognostic models. These simulations should incorporate both nominal and faulty behavior with the ability to inject various faults into the system....

Scientists need to be able to quickly develop and run parallel simulations without writing low-level message passing codes using compiled languages such as C/C++/Fortran. Traditionally, high-level languages that support rapid development, such as MATLAB, IDL, Mathematica, and Python,...

AMBER is an automated tool for performing transient loads analysis of structural systems composed of one or more flexible bodies. Each body is initially supplied in Craig-Bampton form. Two basic solution approaches are available: traditional system assembly and multibody. The traditional approach is better...

Wide-temperature and extreme-environment electronics are crucial to future missions. These missions will not have the weight and power budget for heavy harnesses and large, inefficient warm boxes. In addition, extreme-environment...

Wide temperature and extreme environment electronics are crucial to future missions. These missions will not have the weight and power budget for heavy harnesses and large, inefficient warm boxes. In addition, extreme environment electronics, by their...