Topic

Development of the next generation of spaceflight vehicles has prompted a renewed focus on sound source characterization and near-field propagation modeling. Without advancements in these areas, large uncertainties in vibro-acoustic loading estimates on space vehicles and payloads may result...

University of Washington researchers have created PolySTAT, a new injectable polymer that strengthens blood clots. The polymer, administered in a single shot, addresses internal injuries and reduces blood loss.

This concept uses an optical interferometric method to determine the density and/or pressure of the gas state contained with tank ullage. The system is similar to compression tank volume methods. By using an optical interferometric technique to determine gas density and/or pressure, a much...

The Earth’s magnetosphere offers a wealth of information on particle dynamics, acceleration, and trapping. Fast neutrons, produced in the Earth’s atmosphere by the impact of galactic cosmic rays (GCRs) and solar energetic particles (SEPs), are an important but poorly measured component of...

Given the increased availability of small satellite opportunities either through CubeSats or the Air Force’s University Nanosat program, and the limited availability of larger platforms, it is challenging to develop new instrumentation that not only fits within the envelope of small...

A variable acceleration calibration system combines an innovative mechanical system and a statistical design of experiments to calibrate multi-axis force transducers. This system can reduce calibration time, allow for improved calibration of large-scale transducers, provide mobility for on-site...

Fourier transform spectroscopy works by measuring a spectral/light signal through a Michelson interferometer. In order to know the wavelength of the signal, one must use a stable reference, which is typically a metrology laser. In a standard Fourier transform...

Concentration-driven molecular diffusion is a fundamental phenomenon essential for the transport of nutrients in cells, for oxygen exchange in the lungs, and mating of chemicals in industrial reactors and the food industry. Thus, diffusion plays a...

The combination of electronic and mechanical properties of carbon nanotubes (CNTs) has led to wide-ranging investigation of their potential in future electronics and computing, sensors, electrodes, and composites. A method and system for fabricating an array of two or more CNT structures on a coated...

A new method was developed to prepare monodisperse nano to microparticles of polystyrene ranging from 0.5 to 2.5 microns in relatively large-quantity batches (2 L, 10% by weight in water). Current commercial sources are very expensive and can typically only be acquired on a...

The need for low-cost and environmentally friendly processes for fabricating printable electronics and biosensor chips is growing. Nanomaterials have proved to be very useful in both printable electronics due to their electronic properties, and in...

This technology exploits the capabilities of additive manufacturing to attenuate the fan noise within the inlet or aft duct of a turbofan engine. The approach may be expanded to include auxiliary power units, environmental control systems, or other...

CubeSat appendices such as solar panels and antennas often need to be constrained by a release mechanism during launch. These appendices are then deployed once the desired orbit is reached. The usual constraint method used is a combination of an unpredictable/...

There is a need for experimental techniques that have low cost and rapid turnaround. It is also necessary to obtain quantitative information from such a method. Previous methods are either lacking in quantitative information such as dye or smoke injection, or require considerable set-up and cost...

A highly efficient way to cool solid-state crystal lasers was developed. This thin-film evaporative cooling technique offers higher optical efficiencies and monochromatic quality than traditional conductive cooling techniques. Developed for use in side-pumped 2.0- micron laser systems used in...

A MEMS (microelectromechanical systems) micro-translation stage (MTS) with large linear travel capability was developed that uses capacitive electrostatic forces created by stators arranged linearly on both sides of a channel, and matching rotors on a moveable shuttle for precise...

Accurate measurements of airflow angles are among the most expensive and difficult to obtain in flight testing because of the complexity of the airflow near the aircraft and the consequent need to carefully mount and calibrate the sensors. A novel technique was developed...

A new “smart bandage” from engineers at UC Berkeley uses electrical currents to detect early tissue damage from pressure ulcers, or bedsores, before they can be seen by human eyes. The device could potentially be carried by a nurse for spot-checking target areas on a patient, or incorporated into a wound...

A new technology has been developed for improving performance and stability of control systems. This method represents a significant advancement in the state-of-the-art of adaptive control technology. The present invention is a new type of adaptive...

A Rice University mobileVision system monitors eye health and spots signs of macular degeneration and diabetic retinopathy.The patient-operated, portable device can be paired with a smartphone to give clinicians finely detailed images of the macula – the spot in the center of the eye where vision is...

To accommodate the predicted increase in air traffic, the next generation of air traffic management (ATM) systems relies on operational concepts where the responsibility for separation is distributed between airborne and ground systems. These distributed modes of operation...

The health and integrity of aircraft sensors and instruments play a critical role in aviation safety. Inaccurate or false readings due to icing of airspeed sensors in flight can lead to improper decision-making, resulting in serious consequences. Icing or blockages of pitot airspeed sensors provide very...

The NASA Aircraft Management Information System (NAMIS) is an Enterprise Resource Planning/Mission Support software suite designed to meet both the mission support requirements and the business management requirements of NASA Johnson Space Center’s (JSC) Aircraft Operations Division (AOD). The...

Sector 33 is a mobile app for the Apple and Android mobile platforms that provides a single-user, interactive air traffic control simulator (game) for mobile devices. The main features of the app include an interactive air traffic control simulation with numerous problems for two to five airplanes; introductory videos on air traffic...