Topic

Every LiDAR design faces the classic balancing act of signal versus noise. In order to maximize the range of a LiDAR, a receiver must amplify fractions of a micro-amp of photo current into a usable range for signal processing to occur, but...

The Flash LIDAR Emulator is a computer system designed to be functionally equivalent to a Flash LIDAR sensor camera. The system has the same hardware interfaces as the sensor, and produces images of comparable quality to the flash LIDAR sensor in real time (30 frames per second). The emulator is then used as a substitute for...

Carbon nanotubes (CNTs) are being studied for use in high-strength/lowweight composites and other applications. Recent research on thermal dissipation materials for high-power electronic devices is generating a lot of interest in various industries. Carbon nano tubes have attracted much attention due to their...

NASA’s Deep Space Network (DSN) is looking to modernize aging downlink receivers for telemetry, tracking, and radio science. It is looking to replace multiple types of custom-built, special-purpose receivers with a unified receiver architecture that...

Ceramic Column Grid Array (CCGA) packages have been increasing in use based on advantages such as high interconnect density, very good thermal and electrical performance, compatibility with standard surface-mount packaging assembly processes,...

Many methods have been developed for interrogation of wireless passive sensors. Surface acoustic wave (SAW) sensors and RF reflection sensors can receive and reflect electronic magnetic waves that are broadcast and received by the antennas....

Structural health management systems that, by way of real-time monitoring, help mitigate accidents due to structural failures, will become integral technologies of the next-generation aerospace vehicles. Advanced sensor arrays and signal...

Optical detection of gaseous carbon dioxide, water vapor (humidity), and oxygen is desired in Portable Life Support Systems (PLSS) incorporating state-of-the-art CO2 scrubbing architectures. Earlier broadband detectors are nearing their end of life, and recent advances...

Extravehicular activities (EVAs) are dangerous to astronauts for a number of reasons, including high levels of physical exertion, potential for impacts by space debris particulates that could puncture the spacesuit and cause depressurization, Moon dust exposure that is...

Conventional transport aircraft wing design is driven mainly by cruise efficiency, i.e., adequate lift is generated at high speed for level flight with minimal drag. Conventional high-lift systems (leading edge slats and trailing edge flaps) were...

Experiments that take into account the impact of convective weather on airspace operations, future concepts, and flight deck tools require a source of weather data that is readily available, of predictable quality, and tailorable to experimental objectives. Real-world weather data is sparse, highly random, and disorganized....

Pair-wise Trajectory Management (PTM) is a concept that utilizes airborne and ground-based capabilities to enable airborne spacing operations in oceanic regions. The goal of PTM is to use enhanced surveillance, along with airborne tools, to manage the...

Conventional aircraft typically include propulsion engines that are under the wing or tail surfaces. Each propulsion engine system includes an engine housed in a nacelle with an inlet and a nozzle system. Primary component noise sources from the engine system include the noise associated...

The Rotorcraft Noise Model (RNM) is a suite of computer models that predicts far-field noise for single or multiple flight vehicle operations. RNM calculates the effects of sound propagation over varying ground terrain for acoustic sources using geometrical theory of diffraction algorithms, and through a horizontally...

Once astronauts venture beyond Earth’s protective atmosphere, they are exposed to the high-energy charged particles of galactic cosmic rays (GCR) and solar particle events (SPE), and secondary protons and neutrons. GCR are composed of ions, the great majority of which are protons (≈87%) and helium nuclei...

Supplemental oxygen delivery systems are vital to provide a critical life support respiratory function. Whether they are used for patients suffering from lung diseases or other illnesses, or astronauts donning an oxygen mask during a toxic spill or fire on a spacecraft, lightweight and portable...

Separation of particles based on size is one of the essential components in biochemical analysis, environmental assays, and industrial and biomedical applications. Filtration is one of the most frequently used techniques to separate particles. A mechanical filter can be used to remove, filter,...

The lack of reliable microvalves impedes many lab-on-a-chip applications for blood analysis. On the other hand, blood clotting — the formation of solid blood aggregate to stop bleeding — provides a natural valving mechanism. It is therefore very attractive to use this mechanism for...

This invention places a drug delivery system inside a prosthetic implant to circumvent the physical issues encountered after fitting the implant. Implants being relatively large in size would be able to house the drug-carrying device inside them without compromising the structural integrity or the...

The ability to distinguish between high and low levels of task engagement is important for detecting and preventing performance decrements during safety-critical operational tasks in the real world. Examples of such tasks include commercial aviation, monitoring for...

The software package BALFIT was developed for both the processing of wind tunnel strain-gage balance data and the analysis of more general multivariate experimental data sets. The software uses automatically generated regression models for the analysis....

Support Vector Machines (SVM) can be used as a binary classifier for a wide range of data and problems. For text, it is often used to determine automatically if a document belongs to a given topic category. Automatic and reliable classification of documents can be an invaluable tool for industries that monitor...

This Python script will allow the user to read, analyze, and display National Oceanic and Atmospheric Administration (NOAA) Multi-Radar/Multi-Sensor(MRMS) mosaic tile files containing mosaic radar reflectivities on a national 3D grid. Simple diagnostics and plotting, as well as computation of composite...

The objective of this invention is to transform applications that process big data in arbitrary formats using the MapReduce parallel programming model and executed on the open-source Hadoop platform. Many legacy data-intensive applications do...