Topic

This technology allows one to test small-body surface mobility and sampling systems in the laboratory. It is capable of simulating a microgravity environment with relevant terrain. The magnitude of the gravity, the terrain properties, and the surface system being tested are all easily modified to allow for a broad range of...

NASA’s Jet Propulsion Laboratory has developed an advanced energy-storage device to accommodate portable devices, minimize emissions from automobiles, and enable more challenging space missions. The use of silicon for the anode of lithium ion (Li-ion) batteries is...

PyTMatrix is a Python interface to a T-matrix numerical scattering computation code originally developed at NASA GISS (Goddard Institute for Space Studies). It integrates into the NumPy/SciPy scientific framework. The software provides streamlined access to numerical T-matrix...

NASA’s Langley Research Center has developed new software that enables users of critical inspection systems to validate the capability of the inspection system. Traditionally, inspection systems are validated using various methodologies to...

A Saturn Net Flux Radiometer (SNFR) is being developed as part of a payload for a future NASA-led Saturn Probe Mission. The current design has two spectral channels i.e., a solar channel (0.4-to-5 μm) and a thermal channel (4-to-50 μm). The SNFR is capable of viewing five distinct viewing angles during the...

After decades of composite over-wrapped pressure vessel (COPV) development, manufacturing variance is still high, and has necessitated higher safety factors and additional mass to be flown on spacecraft, reducing overall performance. When liners are used in COPVs, they need...

Bearing surfaces are typically either metal-on-metal (MOM), ceramic-on-ceramic (COC), or metal-on-polyethylene (MOP). MOM and MOP couplings have the drawback that metallic or polyethylene particles can sometimes separate from the couplings, which can cause significant problems, particularly in a hip or joint replacement....

The primary purpose of this work is to develop and demonstrate technologies to manufacture ultra-low-cost precision optical systems for very large x-ray, UV/optical, or infrared telescopes.

Aeroplastic refers to a family of polymeric composites with properties that provide a significant reduction in heat transfer. These composites reduce the thermal conductivity of the base polymer resin between 20%-50% without changing its mechanical properties or modifying the original techniques for processing those polymers....

NASA’s Glenn Research Center is offering a sensor and actuator networking innovation applicable to smart vehicle or component control. This innovation requires no additional connectivity beyond the wiring providing power. This results in lower system weight, increased ease and flexibility...

Innovators at NASA’s Glenn Research Center have developed a microwave power module to power radar, communications, and/or navigation interchangeably. This high-efficiency, all-solid-state microwave power module (MPM) is based on a multi-stage distributed-amplifier design, which is capable of very wideband operation....