Stories
0
16560
30
Briefs: Imaging
Commercial buildings in the United States account for nearly 40% of the total energy consumption. Among them, electricity is the largest energy source for buildings....
Briefs: Materials
For several decades, improvements in conventional transistor materials have been sufficient to sustain Moore’s Law — the historical pattern of microchip manufacturers...
Products: Mechanical & Fluid Systems
Laser Sensors
The optoNCDT 1750 laser sensors from Micro-Epsilon, Raleigh, NC, feature measuring ranges of 500 and 750 mm for fast, high-precision measurement tasks that require large measuring ranges. They are...
Briefs: Medical
Removable Implant May Control Type 1 Diabetes
For the more than 1 million Americans who live with Type 1 diabetes, daily insulin injections are literally a matter of life and death. And while there is no cure, a new device may help manage the disease.
Briefs: Manufacturing & Prototyping
Demands for improved computer processing power have led researchers to explore both new processes and other materials beyond silicon to produce electronic components....
Briefs: Propulsion
Innovators at NASA’s Glenn Research Center have developed a simple, lightweight, inline, two-speed drive that can be used either as an overall transmission, or as a supplemental add-on input...
Briefs: Mechanical & Fluid Systems
Compact Termination for Structural Soft Goods
Space environments are particularly harsh for the high-strength fibers NASA relies on for soft structures. Kevlar, Nomex, Nylon, and other synthetic fibers are broken down by exposure to the combination of vacuum, atomic oxygen, and ultraviolet radiation. Glass fiber offers unique advantages for...
Briefs: Electronics & Computers
NASA’s Kennedy Space Center (KSC) has created the Cryo-Fluid Capacitor (CFC) that capitalizes on the energy storage capacity of liquefied gases, and the relative simplicity of high-pressure gas bottles while...
Briefs: Sensors/Data Acquisition
For emergencies involving radiation, decision-makers must have a means to swiftly assess the situation. Having analysis tools that can quickly and reliably make sense of radiation data is of the essence.
Briefs: Sensors/Data Acquisition
An acknowledged objective of critical-care medicine is a timely, accurate, readily deployable, cost-effective, and, importantly, safe means of assessing and/or monitoring critical...
Briefs: Mechanical & Fluid Systems
Actuators are used in a wide variety of electromechanical systems and in robotics, in applications such as steerable catheters, aircraft wings that adapt to changing conditions, and wind turbines...
Briefs: Mechanical & Fluid Systems
NASA Ames Research Center has developed a novel, low-cost, self-contained guidance system for small payload operators. Small satellites are becoming ever more capable of performing valuable missions for both...
Briefs: Materials
USAF-96 Steel is a low-alloy steel that, when thermally processed with the method described here, has the following typical values: an ultimate tensile strength of 245 ksi, yield strength at 0.2% offset of...
Briefs: Sensors/Data Acquisition
Walls often make up more than half of indoor surface area, especially in residential and office buildings. In addition to delimiting spaces, both for functional and...
Q&A: Sensors/Data Acquisition
Researchers at Oregon State University’s College of Engineering have taken an important step toward the rapid manufacture of stretchable electronic devices,...
Briefs: Electronics & Computers
Power electronics used for routing, control, and conversion of electrical power traditionally utilize silicon semiconductors. These systems tend to be bulky, require active cooling, and are inadequate for...
Articles: Medical
This column presents technologies that have applications in commercial areas, possibly creating the products of tomorrow. To learn more about each technology, see the contact information provided for that innovation.
Briefs: Motion Control
NASA Langley Research Center has developed Greased Lightning, the first unmanned aerial vehicle (UAV) that combines vertical take-off and landing (VTOL) capability with...
Articles: Software
Rapidly advancing technology and groundbreaking innovations are changing the world of manufacturing. Trends such as Big Data, Cloud Technology, and the Internet...
Application Briefs: Manufacturing & Prototyping
Stratasys Ltd.Eden Prairie, MNwww.stratasys.com
Orion is NASA’s spacecraft that will send astronauts to the Moon and beyond. Orion’s next test flight, dubbed Exploration Mission-1 (EM-1), will...
Briefs: Aerospace
The Federal Aviation Administration (FAA) averages more than 100 reports a month of interactions between unmanned aircraft systems (UAS) and commercial or private planes. For UAS to fly in...
Briefs: Aerospace
NASA has developed a novel method to render visible the density changes in air that cause a refractive index change by an airborne vehicle. These density changes include shock waves, vortices,...
Briefs: Sensors/Data Acquisition
A wearable, non-invasive system was developed to monitor electrical activity in the stomach over 24 hours — essentially an electrocardiogram for the gastro-intestinal (GI) tract. Monitoring for longer...
5 Ws: Packaging & Sterilization
Who
Food manufacturers, as well as manufacturers of medical supplies and instruments.
Briefs: Power
Magnetic Induction Heating of Space Foods During Dispensing Under Weightless Conditions
Hot foods are psychologically pleasing. Food heating systems are currently part of the astronaut feeding program. An electrical method of heating foods during dispensing in space uses magnetic induction heating. The process is up to 95% efficient in converting...
Briefs: Propulsion
Method for Establishing Cool Flames and Flameless Fuel Oxidation with Zero Emissions Using Non-Equilibrium Plasma Activation
Current engines and combustors run at high temperature, which leads to problems of engine knocking, soot and NOx emissions, and difficulty in combustion control. On the other hand, low-temperature combustion and fuel...
Briefs: Mechanical & Fluid Systems
NASA Kennedy Space Center seeks partners interested in the commercial application of the Quick Disconnect for High Pressure Mate/De-Mate. Designed at KSC, this technology is intended for use in...
Briefs: Automotive
Vanadium dioxide’s unique properties make it ideally suited for outperforming silicon and giving rise to a new generation of low-power electronic devices. This compound can be...
Briefs: Medical
Researchers have developed an innovative design for a wheelchair that can more easily navigate on soft and uneven outdoor terrain such as grass and gravel. The chair uses three wheels — two wheels in the front...
Top Stories
INSIDER: Medical
Brain Implant Enables Safer Drug Delivery
Features: Medical
Built to Adapt: Rethinking Contract Manufacturing for a New Era
Features: Materials
OEM Toll Processing Advances High-Value Products
From the Editor: Medical
From The Editor: Charting the Technologies That Will Shape Medtech in 2026
INSIDER: Medical
Oxygen Scavenger Doubles Biosensor Performance
Features: AR/AI
Engineering for the Future: The Trends Transforming Medtech in 2026
Ask the Expert
Eric Dietsch on the Benefits of Nitinol Wire
In collaboration with the Fort Wayne Metals Engineering team, Eric Dietsch focuses on supporting customers with material recommendations, product development, and education. Eric is available to help you and your company with any Nitinol-related questions or needs that you may have.
Webcasts
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Medical
Developing Sustainable Drug-Delivery Devices
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
On-Demand Webinars: Manufacturing & Prototyping
Understanding Testing and Compliance Requirements for Wireless Medical Devices
Podcasts: AR/AI
Personalized Medicine and Drug Delivery
Podcasts: Green Design & Manufacturing
Inside Story
Inside Story: Trends in Packaging and Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.