Stories
0
13950
30
Articles: Photonics/Optics
There are a number of ways to extract data from a production line. In factory automation, sensors are used in work cells to gather data for inspection or to trigger other devices. These sensors fall into...
Briefs: Mechanical & Fluid Systems
NASA Goddard Space Flight Center developed gear bearing technology that combines gear and bearing functions into a single unit that significantly improves gear drives for electrical, internal combustion, and turbine motors. The...
Application Briefs: Manufacturing & Prototyping
EMAG L.L.C. is the U.S. subsidiary of a major German machine tool builder that specializes in machine tools for the production of automotive, off-highway, agricultural, and oil field...
Application Briefs: Mechanical & Fluid Systems
For wheelchair users, the feeling of uneven ground can seem all too familiar. Determined to make ride discomfort a thing of the past, Israel-based SoftWheel has completely reinvented the wheel for a...
Briefs: Wearables
An interdisciplinary Northwestern University team has developed a pair of soft, flexible wireless sensors that replace the tangle of wire-based sensors that currently monitor babies in hospitals’...
Application Briefs: Sensors/Data Acquisition
Early wearable fitness monitoring devices were designed to perform a set of valuable but straightforward activities: tallying the number of steps we take daily, recording the number of hours we sleep, and...
Briefs: Test & Measurement
Researchers at the University of California, Irvine have developed a wearable, disposable respiration monitor that provides high-fidelity readings on a...
Articles: Communications
The 2019 Sensors Expo and Conference will be held at the McEnery Convention Center, San Jose, CA from June 25 – 27. Both the expo and conference are excellent opportunities to get a good sense of important sensor...
Application Briefs: Test & Measurement
Smart agriculture, also known as precision agriculture, allows farmers to maximize yields using minimal resources such as water, fertilizer, and seeds....
Briefs: Test & Measurement
The difficulty in spotting minute amounts of disease circulating in the bloodstream has proven a stumbling block in the detection and treatment of cancers that advance stealthily with few...
Briefs: Electronics & Computers
Batteries with metallic lithium anodes offer enhanced efficiency compared to conventional lithium-ion batteries because of their higher capacity. However, safety concerns and a short lifespan stand in the way. To...
Briefs: Electronics & Computers
Stretchable electronics, which can be stretched, deformed and wrapped onto nonplanar curved surfaces, have attracted much attraction due to their...
Articles: Energy
We recently had a discussion with Sri Peruvemba, VP of Strategy at BeBop Sensors (Berkeley, CA), about the technology and applications for their two-dimensional fabric sensor material. I started by asking Sri...
Products: Sensors/Data Acquisition
Extreme Environment Displacement Sensors and Systems
The Measuring Division of Kaman Precision Products, Inc (Colorado Springs, CO) announces the availability of its Extreme Environment high-precision displacement sensors and...
Application Briefs: Mechanical & Fluid Systems
Medical ventilation technology has come far since the original iron lung was first used more than 90 years ago. Using negative pressure to ventilate, the patient was...
Briefs: Sensors/Data Acquisition
Simon Fraser University and Swiss researchers are developing an eco-friendly, 3D printable solution for producing wireless Internet-of-Things (IoT) sensors that can be used...
Briefs: Sensors/Data Acquisition
Graphene Flagship partner ICFO, based in Barcelona, Spain is developing graphene-based prototypes that aim to turn mobile phones into life saving devices. The first of these will allow...
Briefs: Regulations/Standards
Anew electromyography biofeedback device that is wearable and connects to novel smartphone games may offer people with incomplete paraplegia a more affordable, self-controllable therapy to enhance their...
Briefs: Manufacturing & Prototyping
Traditionally, electronics are cooled using a heat sink that transfers the heat generated by the electronic system into the air or a liquid coolant. For the heat sink to work, it has to be...
Briefs: Mechanical & Fluid Systems
Typical butterfly valves cannot seal at both ambient and cryogenic temperatures. At cryogenic temperatures, valves grow and shrink, changing critical dimensions such as distance between the disc and seat. Ideally,...
Briefs: Semiconductors & ICs
Extremity vascular injury results in bleeding and lack of blood flow beyond the site of vessel disruption (ischemia). Priorities when this occurs include hemorrhage control, management of life-threatening injuries, and...
Articles: Energy
This column presents technologies that have applications in commercial areas, possibly creating the products of tomorrow. To learn more about each technology, see the contact information provided for that innovation.
Briefs: Sensors/Data Acquisition
Light is widely used for communications, carrying phone conversations and video signals through fiber optic cables around the world in pulses composed of many photons. Single photons...
Briefs: Electronics & Computers
Lithium batteries allow electric vehicles to travel several hundred miles on one charge. Their capacity for energy storage is well known — so is their tendency to occasionally catch...
Briefs: Electronics & Computers
Design Software Identifies a Product's Performance Tradeoffs
Designing any product — from complex car parts to wrenches — is a balancing act with conflicting performance tradeoffs. Making something lightweight, for instance, may compromise its durability.
Briefs: Wearables
Over the past decade, many researchers have been working on small, portable diagnostic devices based on chemical reactions that occur on paper strips. Many of these tests make use of...
Briefs: Sensors/Data Acquisition
Wearable devices have been limited to sensing signals either on the surface of the skin or right beneath it. A new wearable ultrasound patch non-invasively monitors blood pressure in arteries as...
Briefs: Photonics/Optics
Microwave signals are ubiquitous in wireless communications but interact too weakly with photons. A technique was developed to fabricate high-performance optical microstructures using lithium niobate, a material with...
Briefs: Aerospace
Double-Fed Induction Linear Alternator
This technology was developed to address the limitations of traditional, single-fed linear alternators that require permanent magnets, adhesive bonding organics, and heavy iron laminations for flux control. They experience eddy-current losses and require electromagnetic interference protection. Furthermore,...
Top Stories
INSIDER: Medical
Brain Implant Enables Safer Drug Delivery
Features: Medical
Built to Adapt: Rethinking Contract Manufacturing for a New Era
Features: Materials
OEM Toll Processing Advances High-Value Products
From the Editor: Medical
From The Editor: Charting the Technologies That Will Shape Medtech in 2026
INSIDER: Medical
Oxygen Scavenger Doubles Biosensor Performance
Features: AR/AI
Engineering for the Future: The Trends Transforming Medtech in 2026
Ask the Expert
Eric Dietsch on the Benefits of Nitinol Wire
In collaboration with the Fort Wayne Metals Engineering team, Eric Dietsch focuses on supporting customers with material recommendations, product development, and education. Eric is available to help you and your company with any Nitinol-related questions or needs that you may have.
Webcasts
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Medical
Developing Sustainable Drug-Delivery Devices
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
On-Demand Webinars: Manufacturing & Prototyping
Understanding Testing and Compliance Requirements for Wireless Medical Devices
Podcasts: AR/AI
Personalized Medicine and Drug Delivery
Podcasts: Green Design & Manufacturing
Inside Story
Inside Story: Trends in Packaging and Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.