Stories
33
0
720
30
Products: Electronics & Computers
Mornsun America (Hudson, MA) has introduced the WRA/WRB-LT-3W Series of surface mount DC/DC converters. The products offer 3W of power in a high density 0.93" × 0.73" × 0.33" surface mount package and are suitable for a...
Products: Electronics & Computers
Mill-Max (Oyster Bay, NY) offers a series of rugged spring pins capable of carrying 9 amps continuous current at 10 °C temperature rise. The Mill-Max 0850, 0851, 0852, and 0853 spring pins are suitable for rugged...
Products: Electronics & Computers
Douglas Electrical (Randolph, NJ) offers wire-to-wire feedthroughs for providing power and/or signal transmission into and out of vacuum or pressure environments. They are suitable for applications such as...
Products: Medical
Protek Power (Hudson, MA) has introduced the PM400 Series of AC/DC power supplies, featuring 400 watts of performance in a package of 4 × 7 × 1.58 inches for medical applications, including patient vicinity medical...
Products: Medical
GlobTek (Northvale, NJ) has introduced the GT-91120 series of in-line power supplies with double-enforced insulation mechanical configurations. They feature regulated outputs voltage from 5V to 48VDC in 0.1V increments...
Products: Medical
ACS Motion Control (Eden Prairie, MN) has developed SPiiPlus IOMnt EtherCAT digital I/O modules that offer up to 32 inputs and 32 outputs, with minimal power dissipation. The inputs are designed to meet EN 61131-2, type...
Products: Electronics & Computers
Colder Products (St. Paul, MN) has introduced the Mini Hybrid connector, which eliminates the need for multiple connections between remote tools and a device. For applications requiring a smaller footprint, this...
Products: Medical
The PPWAD200 Series from Power Partners (Hudson, MA) provides 200 Watts of desktop power in a 7.42" × 4.1" × 2.36" package. The series features a no load standby power of ≤0.5W and average efficiency of ≥87%. The...
Products: Medical
TT electronics PLC (Surrey, UK) has introduced chip resistors that are optimized for use with conductive adhesives and suitable for applications like medical MRI scanners where non-magnetic components must be used. The GCR...
Briefs: Electronics & Computers
Thermal Management Solutions for Medical Applications
Thermal management of medical electronic devices and systems is now more challenging. Power densities continue to increase while product form factors continue to shrink. Simple thermal management solutions, such as passive cooling (adding a fan and heat sink), are no longer typically viable to...
INSIDER: Wearables
Wrist-Mounted Device for the Visually Impaired
The Tacit, a haptic sonar glove that helps a visually impaired person navigate complex environments, has been released as a public prototype. The invention uses ultrasonic sensors to sense objects from about 1 inch to 10 feet away, and translates that information into pressure on the user's wrist.
INSIDER: Medical
Flexing the Power of Skin-Mounted Electronics
Engineers are taking important steps toward a future in which skin-mounted electronics could monitor individuals in a natural environment and even offer the potential for human-computer interfacing — all with the flexibility and comfort of a temporary tattoo.
INSIDER: Electronics & Computers
Waving ‘Jell-O’ to the Next Wave of Biocompatible Electronics
North Carolina State University researchers have developed a memory device that is soft, functions well in wet environments, and features “the physical properties of Jell-O,” according to Dr. Michael Dickey, an assistant professor of chemical and biomolecular engineering at NC...
Products: Photonics/Optics
Emblation Microwave (Alloa, Scotland) offers the MSYS245 medical-grade microwave power generator, capable of more than 100 W CW output power at 2.45 GHz. It is suitable for a wide range of surgical...
Products: Medical
LCR Electronics (Norristown, PA) offers a line of single phase COTS filters that operates over an extended temperature range of -40 °C to 85 °C (-40 °F to 185 °F). The RoHS-compliant Single Stage F9100 Filters and Double Stage...
Products: Medical
Mill-Max (Oyster Bay, NY) offers 804 and 805 Series interconnects, suitable for high pin count I/O and board-to-board applications. The triple row pin field allows for signal connections to be more densely packaged....
Products: Medical
Stackpole Electronics (Raleigh, NC) offers the RPC Series of surface mount chips that offer pulse withstanding in a 5% tolerance part. It is completely untrimmed, which allows the entire width of the resistance element to...
Products: Electronics & Computers
The Renata Batteries (Dallas, TX) division of The SWATCH Group has developed a line of 0% mercury silver oxide batteries suitable for powering medical devices including insulin pumps, glucose meters, and surgical tools....
Products: Electronics & Computers
SCHOTT (Southbridge, MA) has introduced the 2nd generation of LEDgine™ LED light engine platform that now offers twice as much light as before. It was developed for more efficient coupling of LED light into fiber...
Products: Electronics & Computers
XP Power (Sunnyvale, CA) has introduced the AHM series of external AC-DC power supplies aimed at medical and IT applications. The series comprises 5 single-output ranges of 85, 100, 150, 180, or 250 Watt output,...
Products: Electronics & Computers
Ironwood Electronics (Burnsville, MN) offers a BGA socket for 1.118 mm pitch, 729 pin BGA IC’s. The SG-BGA-6345 socket is designed for 31 × 31 mm package size and operates at bandwidths up to 8 GHz with less than 1 dB of insertion...
Products: Electronics & Computers
Spectrum Advanced Specialty Products (Fairview, PA) has introduced the Mini-MIL circular connector, a small, lightweight connector that offers space and weight savings with performance equivalent to MIL-DTL-38999. It is...
Products: Medical
Standard and custom high flex silicone flat cables from Cicoil (Valencia, CA) are free of halogens, do not shed surface particulates, and are water and chemical resistant. The cables are suitable for incorporation into power...
Products: Electronics & Computers
Thermobility™ power generation technology from Nextreme Thermal Solutions (Durham, NC) uses heat as a source of electricity for low-power wireless applications. Solid-state thin-film thermoelectric technology is used...
Products: Electronics & Computers
Keystone Electronics (Astoria, NY) has introduced a series of self-retaining, T-1 LED mounting spacers designed to assure uniform and perpendicular LED positioning. The spacers feature internal retention “teeth” that...
Products: Electronics & Computers
Power Partners (Hudson, MA) has introduced the PPWAMD250 Series of medical desktop power supplies, featuring 250 Watts of power in a compact 7.42" × 4.1" × 2.36" package. The series is approved to UL60601-1,...
Products: Electronics & Computers
NewAge Industries (Southampton, PA) offers Newloc® push-to-connect fittings in acetal copolymer and brass. Both allow quick connections to rigid and semi-rigid tubing such as nylon, polypropylene, and polyethylene....
Products: Medical
The ThreadX® RTOS from Express Logic (San Diego, CA) is designed for microcontroller-based applications and features a memory footprint as small as 2 KB to reside on limited on-chip MCU memory. It provides...
Briefs: Electronics & Computers
An experimental walking assist device has been developed to help support body weight and reduce the load on the user’s legs while walking, going up and down stairs, and in a...
Top Stories
INSIDER: Medical
Brain Implant Enables Safer Drug Delivery
Features: Medical
Built to Adapt: Rethinking Contract Manufacturing for a New Era
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
From the Editor: Medical
From The Editor: Charting the Technologies That Will Shape Medtech in 2026
Features: Materials
OEM Toll Processing Advances High-Value Products
Podcasts: Medical
Ask the Expert
Eric Dietsch on the Benefits of Nitinol Wire
In collaboration with the Fort Wayne Metals Engineering team, Eric Dietsch focuses on supporting customers with material recommendations, product development, and education. Eric is available to help you and your company with any Nitinol-related questions or needs that you may have.
Webcasts
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Design
Developing Sustainable Drug-Delivery Devices
Podcasts: Design
Smarter Pathways for Precision Drug Delivery in Cancer Care
On-Demand Webinars: Medical
Understanding Testing and Compliance Requirements for Wireless Medical Devices
Podcasts: AR/AI
Personalized Medicine and Drug Delivery
Podcasts: Manufacturing & Prototyping
Inside Story
Inside Story: Trends in Packaging and Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.
