Design/​Engineering

New Products and Services

Reference design kits, smart textiles, thermoplastic elastomers, and more.

American PAPR Ramps Up PPE Production in Response to Biden Buy America Proposal

Personal protective equipment (PPE) manufacturer American PAPR LLC is ramping up manufacturing of respirators across its 17-state supply chain in answer the Biden...

Test Distinguishes SARS-CoV-2 from Other Coronaviruses

Biomedical engineers have demonstrated a tablet-sized device that can reliably detect multiple COVID-19 antibodies and biomarkers simultaneously. Initial results show the test can...

COVID-19 SCAN kit Provides Fast, Affordable Screening

To address the COVID-19 outbreaks that continue to skyrocket with new clusters in numerous dark red areas in many provinces across Thailand, a research team has developed an innovative...

New Face Mask Prototype Detects COVID-19 Infection

Engineers at MIT and Harvard University have designed a novel face mask that can diagnose the wearer with COVID-19 within about 90 minutes. The masks are embedded with tiny, disposable...

A $600 Medical Device Could Help Doctors Detect Throat Cancer

A team of researchers has developed a low-cost nasopharyngoscope for use in provincial and district hospitals in the Vietnam, where traditional scopes are cost prohibitive. These...

New Rapid Test Detects Coronavirus Infection in 10 Minutes

An antigen-based detection technique could be used to analyze as many as 500 samples per hour. In a recently completed study, the rapid test was able to diagnose a viral infection...

Harnessing Next-Generation Sequencing to Prepare for the Next Pandemic

Researchers have designed a testing protocol for SARS-CoV-2 that can process tens of thousands of samples in less than 48 hours. The test, called SARSeq, or Saliva...

Next-Gen POC Diagnostics: Electronic Measurement Technology Driven by Global Demand for COVID-19 Testing

Many new companies entering the market are planning a diagnostic roadmap of capabilities beyond their entry point of COVID-19 testing.

Historical Devices

This medical device, once also used to castrate horses, was used to remove tumors, cysts, and hemorroids in the late 1800s and early 1900s.

COVID-19 Test Detects Antibodies in Hundreds of Tiny Blood Samples

A reliable — and cheap — antibody test can analyze more than 1,000 samples at once and requires a small drop of blood, such as that from a finger prick.

Study Proposes Low-Cost, High-Efficiency Mask Design

Modifications to existing N95 masks improve their reusability.

From the Editor - FDA Catalog of Tools Helps Accelerate Device Development

FDA has created a “Catalog of Regulatory Science Tools,” in which it provides a comprehensive list of peer-reviewed resources for medical device developers.

EDGe Surgical Granted U.S. Patent for Next-Generation Spine Device

EDGe Surgical, Inc., a company focused on developing and manufacturing smart orthopedic and spine surgical instruments, has been granted patent 10,912,483 titled “Handheld...

Lipid Research May Help Solve COVID-19 Vaccine Challenges

New research could help solve a major challenge in the deployment of certain COVID-19 vaccines worldwide — the need for the vaccines to be kept at below-freezing temperatures...

Centrifugal Multispun Nanofibers Put a New Spin on COVID-19 Masks

Researchers have developed a novel nanofiber production technique called centrifugal multispinning that will open the door for the safe and cost-effective mass production of...

Diagnostic Test Detects the COVID Virus Even When It Mutates

A diagnostic test can detect the virus that causes COVID-19 even after it has gone through mutations. Called the VaNGuard (Variant Nucleotide Guard) test, it makes use of a...

Fast, Portable Test Can Diagnose COVID-19 and Track Variants

A new viral screening test diagnoses COVID-19 in a matter of minutes with a portable, pocket-sized machine. It also simultaneously tests for other viruses — like influenza —...

Copper Foam Provides Highly Efficient, Durable Filter for Reusable Masks

Researchers have transformed copper nanowires into metal foams that could be used in facemasks and air filtration systems. The foams filter efficiently and...

Show Preview: Evolving to MedDev 2021

The "Evolving To MedDev" 2021 digital event will provide automotive and aerospace companies with practical information about how they can enter into the medical device supply chain.

Medical Device Design: Why Aesthetics Are More Than Cosmetic

An appropriate aesthetic can be much more than consequential cosmetics; it can improve ease-of-use and safety.

Polyolefin Heat Shrink Tubing for Tight-Tolerance Medical Applications: Understanding the Advantages and Development Process

Learn the basics of heat shrink tubing and its use in medical device manufacturing.

Fighting COVID-19: Air Sampler System Traps In-Air Pathogens

Thermo Fisher Scientific Inc. has launched a new surveillance solution designed to deliver fast and highly reliable insight into the presence of in-air pathogens, including...

Lab-Created Heart Valves Can Grow with Recipient

A new study shows for the first time that lab-created heart valves implanted in young lambs for a year were capable of growth within the recipient. The valves also showed reduced...

Low-Cost Pinprick Test Measures COVID-19 Immunity in Under an Hour

A pinprick test accurately measures the concentration of coronavirus antibodies in blood in under one hour. And it’s cheap — costing about tenth of current tests.

Cost-Effective, Easily Manufactured Ventilators for COVID-19 Patients

A team of researchers has developed a low-cost, mass-producible ventilator to help address the worldwide shortage. Because the ventilator is developed specifically for...

Simple, Noninvasive COVID-19 Saliva Test Increases Access

A new saliva-based COVID-19 is less invasive than many of the traditional nasal swab tests in use, and researchers say it is sensitive, specific, and can deliver results at a lower...

Coronavirus-Like Particles Could Ensure Reliability of Simpler, Faster COVID-19 Tests

Rapid COVID-19 tests are on the rise to deliver results faster to more people, and scientists need an easy, foolproof way to know that these tests work...

Leading Women in Engineering & Science: Carrie Mulherin, Chief Marketing Officer, LightDeck Diagnostics

Mulherin helped to bring the CellSearch circulating tumor cell instruments and kits to the market.