Medical

Stories

43
0
0
30
On-Demand Webinars: Robotics, Automation & Control
Feature Image

According to a recent report by Renub Research, the global medical robotics market will be $72.22 billion in 2030. Therefore, as the clinical robotics market grows at a breathtaking...

INSIDER: Medical

A team searched for small molecules as drug candidates and identified a bifunctional antibiotic, azithromycin (AZM), that not only inhibits bacterial...

Feature Image
INSIDER: Medical

A next-generation COVID-19 mucosal vaccine is set to be a gamechanger not only when delivering the vaccine itself, but also for people who are needle-phobic. New research has been...

Feature Image
INSIDER: Manufacturing & Prototyping

A revolutionary system combines remote health monitoring and drug delivery using 3D-printed hollow microneedles. This innovative approach promises to transform healthcare...

Feature Image
Blog: Green Design & Manufacturing

The environmental impact of the healthcare industry has been widely reported, with estimates it is responsible for around 4–5 percent of total global greenhouse gas...

Feature Image
On-Demand Webinars: Medical
Feature Image

The combination of drugs, devices, and/or biological products creates a unique intersection of disciplines within the medical device and pharmaceutical...

Blog: Medical

Recently, I came across an FDA regulatory situation you do not see too often. On the same day, FDA sent two teams of field investigators into two geographically different sites of the same...

Feature Image
Podcasts: Software
AI is optimizing manufacturing efficiency, quality control, and supply chain management.
Feature Image
INSIDER: Design

A small device, about the size of a vitamin pill, can be swallowed and passed through the gastrointestinal tract to sample the full inventory of microorganisms in an individual’s gastro-intestinal...

Feature Image
INSIDER: Medical

A sweat-powered wearable has the potential to make continuous, personalized health monitoring as effortless as wearing a Band-Aid. An electronic finger wrap monitors vital chemical levels — such as glucose,...

Feature Image
White Papers: Motion Control
Document cover
Drive Systems for Medical and Laboratory Equipment

Patients usually are not aware of it, but drive systems are always at their side: in prophylaxis when dentist’s use handtools with ultra-low vibrations, in diagnostics systems where...

News: Manufacturing & Prototyping

Cadence, Inc., a provider of vertically integrated contract manufacturing solutions to the medtech and pharma markets, is excited to announce a significant milestone in the company’s...

Feature Image
News: Test & Measurement
The Eyegaze Edge system developed in collaboration with NASA is an eye-tracking technology that makes 'talking' possible for people who can’t.
Feature Image
Inside Story: Packaging & Sterilization
Eurofins Medical Device Testing (MDT) provides a full scope of testing services. In this interview, Eurofins’ experts, Sunny Modi, PhD, Director of Package Testing; and Elizabeth Sydnor, Director of Microbiology; answer common questions on medical device packaging and sterilization.
Feature Image
Products: Manufacturing & Prototyping
See the product of the month: MMT's benchtop balloon forming machine, for the precise production of structural heart, large platform, and thick wall high-pressure balloons.
Feature Image
Videos of the Month: Wearables
See the videos of the month, including one on a first-in-class medication that targets specific genetic mutations implicated in many types of cancer; one on new, scalable methods of developing battery- and solar-powered fibers; one on a nanofiber-based biodegradable millirobot, called Fibot, that can move in the intestines and degrade in response to the pH of its environment; and one on a new avenue in the attack against influenza viruses.
Feature Image
Global Innovations: Nanotechnology
A research team from Shinshu University, Japan, decided to improve flexible piezoelectric sensor design using a well-established manufacturing technique: electrospinning. Read on to learn more about it.
Feature Image
Products: Medical
See where the product focus is this month: On pumps and valves, including items from Air Logic, Clippard, Emerson, and PI.
Feature Image
Products: Test & Measurement
See the new products and services, including Dri-Air Industries' new dryer for plastics, the MicroDryer Series (MD); Thomson Industries' advanced controllability options to its Electrak ® LL line of long-life electric linear actuators; Instron's next-generation Autoinjector Testing System; more than 40 different thermally conductive greases available from EpoxySet; a series of low-profile pull type clapper solenoids from Magnetic Sensor Systems; and more.
Feature Image
Briefs: Medical
The FDA has granted a Humanitarian Device Exemption Approval for a therapeutic device invented and developed at the University of Michigan for use in children with acute kidney injury and sepsis or a septic condition requiring continuous kidney replacement (dialysis with the artificial kidney) therapy in the intensive care unit. Read on to learn more about it.
Feature Image
Briefs: Sensors/Data Acquisition
Beyond the use of this device for early detection of peptic ulcers, gastritis, and gastric cancers, there is potential to monitor brain health. How? Read on to find out.
Feature Image
Briefs: Materials
An international team of researchers developed the material by embedding clusters of highly dielectric ceramic nanoparticles into an elastic polymer. The material was reverse-engineered to not only mimic skin elasticity and motion types, but also to adjust its dielectric properties to counter the disruptive effects of motion on interfacing electronics, minimize energy loss and dissipate heat.
Feature Image
Briefs: Nanotechnology
Researchers at the University of Rochester and University of Oregon combined their expertise in tendon cell biology and drug-delivery systems to find a better way to deliver therapies that can reduce scar tissue and facilitate improved healing. Read on to learn what they found.
Feature Image
Briefs: Medical
The changing regulatory landscape and innovation of medical products is driving an interest in additional options for medical product sterilization. Read on to learn what this means.
Feature Image
From the Editor: AR/AI
AI is poised to make a major impact on the medtech market by enhancing precision in diagnostics, personalizing treatment plans, and streamlining manufacturing processes. Read on to find out what Editor and Director of Medical Content Sherrie Trigg thinks about the matter.
Feature Image
Briefs: Test & Measurement
Developing and evaluating primary packaging for medical devices continues to be an area ripe for innovation, with ample opportunity to improve existing processes. Read on to learn more about the topic.
Feature Image
R&D: Wearables
A wearable health monitor can reliably measure levels of important biochemicals in sweat during physical exercise. Read on to learn more about the 3D-printed monitor.
Feature Image
R&D: Robotics, Automation & Control
Researchers have developed SPINDLE, a pioneering robotic rehabilitation system. Combining virtual reality (VR) with customized resistance training, SPINDLE offers personalized therapy to enhance strength and dexterity for activities of daily living (ADLs). Read on to learn more about SPINDLE.
Feature Image
R&D: Medical
A soft, flexible film senses the presence of nearby objects without physically touching them. The study features the new sensor technology to detect eyelash proximity in blink-tracking glasses. Read on to learn more.
Feature Image

Ask the Expert

Dan Sanchez on How to Improve Extruded Components
Feature Image

Improving extruded components requires careful attention to a number of factors, including dimensional tolerance, material selection, and processing. Trelleborg’s Dan Sanchez provides detailed insights into each of these considerations to help you advance your device innovations while reducing costs and speeding time to market.

Inside Story

Inside Story: Selecting the Best Pump for Your Medical Device
Feature Image

MDB spoke to Rodd Turnquist, National Sales Manager US, OEM Division, WMFTS, to find out more about selecting the best pumps for medical devices and accelerating time to market.

Videos