Stories
R&D: Mechanical & Fluid Systems
Gadolinium-doped cerium oxide could be a promising alternative to certain piezoelectric materials. It is lead-free, which means that it could be employed in biocompatible medical applications. Further...
Briefs: Photonics/Optics
Products: Mechanical & Fluid Systems
Designed for closed loop servo operation, a series of open aperture voice coil stages from Moticont, Van Nuys, CA, include a standard integral quadrature...
R&D: Tubing & Extrusion
Global Innovations: Mechanical & Fluid Systems
The miniaturization of microelectronic sensor technology, microelectronic robots, and intravascular implants is progressing rapidly. However, it also poses major challenges...
Products: Electronics & Computers
Products: Electronics & Computers
Briefs: Electronics & Computers
Briefs: Mechanical & Fluid Systems
Products: Motion Control
Products: Mechanical & Fluid Systems
Products: Photonics/Optics
Briefs: Medical
Products: Medical
A capabilities brochure from Tech-Etch, Plymouth, MA, describes how the photo etching process enables the company to produce prototype quantities and large...
Briefs: Medical
Because atrial fibrillation (AF) often does not present symptoms, stroke is too often its first manifestation. For effective stroke prevention, timely diagnosis of AF is crucial. Mobile devices...
Technology Leaders: Sensors/Data Acquisition
In the past, the decision to opt for a particular flow sensing technology in respirators and ventilation devices was a painstaking and complex process. More recently, however, flow...
Products: Sensors/Data Acquisition
Coto Technology Inc., North Kingstown, RI, has released the RedRock™ RR100 Micro-Electro- Mechanical Systems (MEMS)-based magnetic reed sensor that is ideally suited to the needs of...
Products: Mechanical & Fluid Systems
Mirrorcle Technologies, Richmond, CA, announces that its gimballess MEMS mirrors are now available with high reflectivity dielectric coatings for use in compact, short-pulse, Q-switched lasers. The company...
Products: Mechanical & Fluid Systems
Molex, Inc., Lisle, IL, announces the launch of its new SlimStack™ SSB6 SMT microminiature board-to-board connectors. With an ultra-low profile (0.35 mm pitch) and compact size (0.60 mm height x 2.00...
Products: Manufacturing & Prototyping
Posifa Microsystems, Inc., San Jose, CA, announces its new line of MEMS Pirani Vacuum Sensors. The PVC 1000 family embodies the latest MEMS innovations, and offer a breakthrough vacuum measurement solution that...
Products: Materials
DELO Industrial Adhesives LLC, Sudbury, MA, presents new MEMS adhesives combining high flexibility and strength, while providing the best processing properties. The newly developed MEMS adhesives are highly...
News: Imaging
Easy Scanning Detection of Eye Diseases
A new optical device about the size of a hand-held video camera, developed by researchers at the Massachusetts Institute of Technology, Cambridge, can scan a patient’s entire retina in seconds and could aid primary care physicians in early detection of many retinal diseases, including diabetic...
R&D: Materials
Researchers at the National Physical Laboratory, Middlesex, UK, Electronics Interconnection group has developed a new method to produce conductive textiles, which could...
News: Medical
Standardizing Measurements for MEMS
The National Institute of Standards and Technology (NIST) has introduced a long-awaited measurement tool to help device designers, manufacturers, and customers to see eye to eye on eight dimensional and material property measurements that are key to device performance.
MEMS, once considered a stepchild...
News: Medical
Disposable MEMS Market Growing, Study Says
The market for microelectromechanical systems (MEMS) used as pressure sensors in medical electronics is likely to grow by 7 percent this year, aided by the use of disposable devices as well as respiratory monitoring, according to iSuppli, El Segundo, CA, a global leader in technology value chain...
Top Stories
INSIDER: Medical

Biodegradable Bandage Helps Wounds Heal
INSIDER: Medical

Superelastic Metal Alloy Shows Promise in Biomedical Applications
INSIDER: Medical

Nanosensor Platform Could Advance Detection of Ovarian Cancer
INSIDER: Medical

Implant Allows Amputees to Use Mind to Control Robotic Arm
Features: Medical

Inside the OEM: Boston Scientific
News: Medical

Ask the Expert
Eric Dietsch on the Benefits of Nitinol Wire

In collaboration with the Fort Wayne Metals Engineering team, Eric Dietsch focuses on supporting customers with material recommendations, product development, and education. Eric is available to help you and your company with any Nitinol-related questions or needs that you may have.
Webcasts
On-Demand Webinars: Medical
New Liquid Silicone Rubber with Primerless Adhesion to Polycarbonate
Webinars: Medical
Inside Story
Rapid Precision Prototyping Program Speeds Medtech Product Development
Rapid prototyping technologies play an important role in supporting new product development (NPD) by companies that are working to bring novel and innovative products to market. But in advanced industries where products often make use of multiple technologies, and where meeting a part’s exacting tolerances is essential, speed without precision is rarely enough. In such advanced manufacturing—including the medical device and surgical robotics industries — the ability to produce high-precision prototypes early in the development cycle can be critical for meeting design expectations and bringing finished products to market efficiently.
Trending Stories
Briefs: Packaging & Sterilization

Harnessing the Power of Ultrasonic Precision Cleaning for cGMP Compliance
Technology Leaders: Robotics, Automation & Control
Is a Medical Robot Really a Robot?
Technology Leaders: Tubing & Extrusion
The Journey Toward Intelligent Catheters
Briefs: Robotics, Automation & Control
Robotics Motion Control: The Complex Relationship Between Movement and Task