Helmet Made of Magnetic Metamaterials Could Improve Brain Scans

It may look like a bizarre bike helmet, or a piece of equipment found in Doc Brown’s lab in Back to the Future, yet this gadget made of plastic and copper wire is a...

Smart Facemask Sends Alerts

A new mask sends an alert to the wearer via their smartphone when the recommended healthy CO2 limits inside the facemask are exceeded.

COVID-19: Scientists Develop Method to Disinfect PPE for Safe Reuse

A team has successfully developed a method for disinfecting PPE so it can be reused or safely recycled.

3D Printed Lightweight Knee Brace

Researchers have developed a lighter, yet more robust knee brace for the elderly who suffer from knee problems.

The TWIICE Exoskeleton: Connector Trends in Medical Device Design

A modular exoskeleton relies on robust connectors.

Sterilization Technology Could Rapidly Disinfect Disposable Face Masks

A new sterilization technology could be the key to safely reusing disposable face masks.

Smart Fabric Stiffens on Demand

A new type of chain mail fabric is flexible like cloth but can stiffen on demand.

Stepping Up Emergency Medical Production with Robotics

Infiplast, a plastics company for medical devices, was asked to design, prototype, test, and manufacture a critical component for ventilators.

AM: Quickly Adapting in Tandem with Medical Innovation

While AM brings speed, efficiency, and an alternative supply chain, the manufacturing method can also lead to better patient care.

Coping with the Pandemic: How One Contract Manufacturer Transformed Its Business

When the COVID-19 pandemic grounded much of the U.S. aerospace business in 2020, a Massachusetts-based contract manufacturer was forced to improvise.

Can a Wearable Stop a Pandemic?

The COVID-19 pandemic has ushered in a new period of growth for wearables.

Adapting to Manufacturing Challenges of COVID-19

See how ultrasonic welding technology is being widely used in nonwoven PPE production.

Optical Tracking System Helps Improve Exoskeleton Fit

Researchers at the National Institute of Standards and Technology (NIST) have developed a new measurement method to test whether an exoskeleton and the person wearing it are moving smoothly and in harmony.

Adapting Under COVID: Expansion and Implementation of PPE Testing

Regardless of the pace of production, quality control testing is still required to ensure that the products being sent to our front lines will perform as required.

Are You Ready for the Next UDI Deadline?

As summer 2020 gives way to fall and we continue grappling with unprecedented challenges, healthcare industry efforts persist to ensure that medical supplies are available when and where they are...

Case Study: Increasing Ventilator Display Mount Production to Meet COVID-19 Demands

Major ventilator manufacturers began implementing "crash programs" to expand their production lines, attempting to cram multiple years’ worth of output into the span of a few months.

Engineers Design a Reusable, Silicone Rubber Face Mask

The prototype mask, which includes an N95 filter, can be easily sterilized and worn many times.

Pandemic PPE: What Good Will Come of the COVID-19 Crisis?

Collaboration and innovation, born of necessity, hold potential to improve the healthcare industry’s PPE product choices and supply reliability.

Highly Sensitive Sensors Show Promise in Enhancing Human Touch

The sensor has remarkable sensitivity, allowing the wearer to detect the light brush of a feather.

‘Hyper Glue’ Could Be Used for Medical Implants

Researchers hope to make everything from protective clothing to medical implants stronger and more corrosion resistant thanks to a newly developed hyper glue formula. The team of...

Safer Helmets Reduce Potential for Traumatic Injury

“Seventy-five percent of all fatal motorcycle accidents globally involve brain injury, with rotational forces acting on the brain being the primary cause of death,” According to NHTSA....

Nd:YAG or Fiber Laser? Choosing the Best Option for Your Micro Welding Application

Four lasers can be used for micro welding: pulsed neodymium-doped yttrium aluminum garnet (Nd:YAG), continuous wave (CW) fiber, quasi continuous wave (QCW)...

Kid: A Telemedicine Solution for Retinopathy of Prematurity

Retinopathy of prematurity (ROP) is a disease that affects premature infants. It is the leading cause of childhood blindness. Although effective treatments exist, many infants are...

Helmet Smart Foam Signals Potential Concussions in Real Time

Most football fans have seen players get hit so hard they can barely walk back to the sideline. All too often in years past, those players were back on the field just a few plays...

Advances in Specialty Metals Drive New Medical Device Applications

Stainless steel in its different varieties, including 304, 316, 316L, and others, is the material that forms the backbone of the medical device industry. However, other...

Exoskeleton Device Helps People with Arthritic Knees

A University of North Texas (Denton, TX) graduate student is taking a step toward making exoskeletons available to help more people. Typically, exoskeletons, which are wearable mobile...

Advanced Tactile Sensors Drive the Next Generation of Blood Pressure Devices

Hypertension (high blood pressure) is the number one risk factor for premature death worldwide, affecting 70 million American adults (one out of three). Day-to-day...

Shape-Memory Polymer Promises 'Programmable' Applications

In partnership with General Motors, researchers from Purdue University, West Lafayette, IN, have revealed that honeycomb “cellular” materials support a range of new...

Controlling Backlash in Mammography Systems

Medical imaging equipment, water handling systems, conveyors, robotic systems, and rotary and linear actuators are among the many devices that may be fitted with electric friction brakes to hold...