Stories
R&D: Medical
Researchers have developed a smart contact lens-type wearable device to prevent diabetic retinopathy and treat it in its early stages by irradiating 120 μW far red/LED light to the retina. This...
R&D: Medical
Briefs: Medical
Diabetic patients need to measure their blood sugar level by drawing blood before and after a meal. It is easy to develop complications due to diabetes. Recently, a...
Features: Sensors/Data Acquisition
Nine years ago, Julian Gunderson was born three months prematurely and weighed just 1 kg (2.2 lb). After a year's worth of injections,...
R&D: Medical
Researchers have found a way to reset a racing heart immediately and automatically by an implanted LED device. It could be the first step toward a pain-free treatment for patients with atrial...
R&D: Medical
Luminescent quantum dots are finding new and exciting applications in current nano-science research, including improved solar energy collectors, LEDs, and quantum computers. A recent thrust from the...
Briefs: Electronics & Computers
A KAIST research team has developed flexible vertical micro LEDs (f-VLEDs) using anisotropic conductive film (ACF)-based transfer and interconnection technology. The team, led by Professor...
R&D: Medical
To treat newborns for treat, the babies lie in incubators. Irradiation with blue light in an incubator is necessary because toxic decomposition products of the blood pigment hemoglobin are deposited in the...
Technology Leaders: Medical
Measuring multiple parameters, accurate readings, and having a long battery lifetime: these are the most critical parameters for a wearable device that monitors cardiovascular health. Wearable...
Features: Wearables
Among the challenges faced by the healthcare sector is a population that is growing older. The elderly population is expected to grow significantly over the next 20 years. Having an...
Briefs: Medical
A team of researchers at the University of Michigan (U-M), Ann Arbor, are using light-emitting diodes (LEDs) as small as neurons to begin to unlock the secrets of neural...
Briefs: Medical
A team of computer scientists from MIT’s Computer Science and Artificial Intelligence Lab (CSAIL) say that they have created a 3D printer that uses machine vision and 3D scanning to self-correct and...
Briefs: Imaging
An interdepartmental team of scientists in applied physics, electrical and biomedical engineering, and diagnostic radiology at Yale University say that there has been an intense and ongoing search...
R&D: Imaging
A team of researchers at Washington University School of Medicine, St. Louis, MO, have developed a brain-scanning technology that tracks what the brain is actively doing by shining dozens...
Briefs: Electronics & Computers
A team of mechanical and materials engineers in Iowa State University say that they have a new way of looking at electronics—as impermanent materials that can completely dissolve once they are...
R&D: Materials
Researchers at the National Physical Laboratory, Middlesex, UK, Electronics Interconnection group has developed a new method to produce conductive textiles, which could...
R&D: Electronics & Computers
Ulsan National Institute of Science & Technology (UNIST), South Korea, has created contact lenses fitted with inorganic light-emitting diode, and tested them on a live rabbit with...
R&D: Sensors/Data Acquisition
A slow-motion method of controlling the synthesis of polymers, inspired by trees and Celtic Knot designs, could open up new possibilities in areas including...
Global Innovations: Medical
http://www.ichf.edu.pl
Devices that support various functions of our bodies are being used...
Features: Manufacturing & Prototyping
The last few years have seen the development of larger, higher power, higher luminescence light-emitting diode (LED) chips. Prior to this, LEDs were typically 0.020" x 0.020", came in various colors and...
Applications: Medical
Selecting an adhesive is often a difficult task because it involves give and take between the end-use and manufacturing requirements. When it comes to bonding applications in the...
Mission Accomplished: Medical
Results of a two-year clinical trial indicate that a NASA technology originally developed for plant growth experiments on space shuttle missions has...
Briefs: Medical
An advanced micro fluorescence detector (microFD) uses a hydrogenated amorphous silicon (a-Si:H) photodiode for high sensitivity biochemical analyses in micro-capillary...
Mission Accomplished: Medical
Since the earliest missions in space, NASA specialists have performed experiments in low gravity. Protein crystal growth, cell and tissue cultures, and separation technologies such as...
Top Stories
Briefs: Wearables

Designing Feature-Rich Wearable Health and Fitness Devices
INSIDER: Wearables

Self-Powered Ingestible Sensor Opens New Avenues for Gut Research
Briefs: Medical

Extrusion Process Enables Synthetic Material Growth
Features: Medical

Enabling a Diabetic to Run the World Marathon Challenge
INSIDER: Wearables

COVID-19 Smart Patch Vaccine Measures Effectiveness
Features: Medical

Ask the Expert
Dan Sanchez on How to Improve Extruded Components

Improving extruded components requires careful attention to a number of factors, including dimensional tolerance, material selection, and processing. Trelleborg’s Dan Sanchez provides detailed insights into each of these considerations to help you advance your device innovations while reducing costs and speeding time to market.
Webcasts
Webinars: Sensors/Data Acquisition

Developing the Ultimate Medical Sensor Technology
On-Demand Webinars: Medical

Precision Pulsed High Voltage: Electroporation Enabling Medical and Life...
On-Demand Webinars: Manufacturing & Prototyping

Product Development Lifecycle Management: Optimizing Quality, Cost, and Speed...
Webinars: Materials

Medical Device Biofilms: Slimy, Sticky, Stubborn, and Serious
On-Demand Webinars: Medical

Artificial Intelligence and Machine Learning: Making Medical Devices Smarter
On-Demand Webinars: Sensors/Data Acquisition

Inside Story
Rapid Precision Prototyping Program Speeds Medtech Product Development
Rapid prototyping technologies play an important role in supporting new product development (NPD) by companies that are working to bring novel and innovative products to market. But in advanced industries where products often make use of multiple technologies, and where meeting a part’s exacting tolerances is essential, speed without precision is rarely enough. In such advanced manufacturing—including the medical device and surgical robotics industries — the ability to produce high-precision prototypes early in the development cycle can be critical for meeting design expectations and bringing finished products to market efficiently.
Trending Stories
Technology Leaders: Regulations/Standards

First, Do No Harm: Changing Strategies to Prove Your Medical Device Is Safe