Tubing Coated with Light-Powered Catalysts Aids Drug Manufacturing

The new class of materials is insoluble, so it can be used over and over again. Such catalysts could be used to coat tubing and perform chemical transformations on reactants as they flow through the tube.

How These Engineered Extrusion Trends Can Improve Device Design and Patient Experience

Hoses and tubes are extensively used within the healthcare and medical industry in a variety of applications, from wound drains and catheters to drug...

How to Select Motors to Address Biologic Drug-Delivery Challenges

Biologic drugs change the way the human immune system responds to numerous diseases and conditions. These drugs have revolutionized disease treatments and offer hope to many...

How Automation Can Improve Tubing Manufacturing

As the cost of shrink tubing used in the production of catheters has increased, and supply chain issues caused delivery delays, FEP shrink tubing, for example, has become a very expensive...

Advanced Extrusion Techniques: How Engineered Extrusion Helps Medical Device Makers Improve Device Designs and Patient Experiences

Advances in hose and tubing manufacturing techniques are supporting new miniaturized devices and wearables.

Design Strategies for Converting Rotary Motion into Linear Motion

Medical pipettes, syringes, and mesotherapy devices often move loads linearly instead of rotationally.

Polyolefin Heat Shrink Tubing for Tight-Tolerance Medical Applications: Understanding the Advantages and Development Process

Learn the basics of heat shrink tubing and its use in medical device manufacturing.

Brushed Versus Brushless DC Motors: What’s the Best Choice for Medical Applications?

Make sure your motor decision is an informed one.

Advanced EMI Filters Improve Brush DC Motors

Billions of brush DC motors are manufactured annually worldwide, a figure that is expected to increase over the next 10 years.

Looking to the Future of the Medical Tubing Sector

The move toward miniaturization, from a medical tubing perspective, is picking up pace.

Making Connections to Accelerate Medical Device Assembly

As medical devices become smaller and more complex, designers and manufacturers are utilizing new and more sophisticated components to incorporate into their device designs. Patients...

Tubing and Hose Buying: Top 20 Tips

It can be challenging to make sure you've covered all the bases during the tubing and hose selection process for medical instrumentation. For each application, there are many elements to consider,...

Why is Silicone the Material of Choice for Healthcare Tubing?

Healthcare-related tubing is used for fluid management and drainage as well as with anesthesiology and respiratory equipment, IVs, catheters, peristaltic pumps, and...

3D Printed Biopsy Robot for Breast Cancer Research

A 3D printed biopsy robot is propelled by cylinders driven by air pressure. With the help of hoses that supply the air, the control of the robot can be placed outside the MRI scanner. The...

Automated Precision Grinding of PET/CT Scan Radiotracers

Computed tomography (CAT or CT) imaging is an incredible tool doctors use to help detect and diagnose patients noninvasively. Using specialized x-ray technology, the device has the...

Rehabilitation Robotics and Prosthetics: Trends and Intellectual Property Considerations

Beyond an ability to merely act, today's medical robotics are increasingly able to sense and “think,” providing for an ever-growing list of...

More than Just Measurement: Dimensional Inspection FAQs

With the ever-increasing influx of automation in the manufacturing industry, the process of prioritizing accurate measurements is needed now more than ever to ensure that...

Fluid Control: Valveless Design Offers Accuracy and Precision

Healthcare providers now, more than ever, make critical patient care decisions based on the test results obtained from medical diagnostic instrumentation. The accuracy, precision,...

Choosing the Right Fluid Dispensing Pump

Choosing the right fluid dispensing pump for a given application is critical. Whether it’s accuracy and precision or the need to perform for millions of cycles, understanding the most suitable types...

Quartet H2O LDD Actively Cooled Lateral Surgical Fiber Optic

Infrared surgical lasers, e.g., CTH:YAG @ 2100 nm and TM:YAG @ 2000 nm, are wonderful tools for minimally invasive surgery such as laser vaporization of hyperplastic prostate...

Helmet Smart Foam Signals Potential Concussions in Real Time

Most football fans have seen players get hit so hard they can barely walk back to the sideline. All too often in years past, those players were back on the field just a few plays...

Advantages of Servo-Actuated Molds for Manufacturing Medical Devices

Electric servo motors are rapidly replacing mechanical, hydraulic, and pneumatic actuation systems in plastic injection molds, particularly those used in medical...

Low-Cost, Noninvasive Test Can Evaluate Muscle Health

A new, noninvasive test developed by researchers at the University of Georgia shows how exercise can help people with neurological injuries and illnesses. Until now, evaluating the muscle...

Black Silicon Prevents Eye Implant from Gumming Up

A team of researchers led by Caltech's Hyuck Choo has developed an eye implant for glaucoma patients that could one day lead to more timely and effective treatment.

New Graphene-Based System Could Help ‘See’ Electrical Signaling in Heart and Nerve Cells

Scientists have enlisted the exotic properties of graphene, a one-atom-thick layer of carbon, to function like the film of an incredibly sensitive...

Bionic Wheelchair Breaks New Barriers

People confined to a wheelchair are still confronted with insurmountable obstacles in everyday life — even in today’s more wheelchair-accessible society. There are often no elevators in a building...

Fully Calibrated MEMS-Based Single-Use Proximal Flow Sensors

In the past, the decision to opt for a particular flow sensing technology in respirators and ventilation devices was a painstaking and complex process. More recently, however, flow...

How the IoT Is Enabling the Next Generation of Medical Devices

The Internet of Things (IoT) has penetrated all sectors of the technological sphere at an accelerating pace. According to Gartner, by the end of 2016, 6.4 billion IoT connected...

Implanted Devices Can Talk Through Wi-Fi

University of Washington (UW) engineers have introduced a new way of communicating that allows devices such as brain implants, contact lenses, and smaller wearable electronics to talk to everyday...