Stories
Features: Medical
Incidents of nosocomial or healthcare acquired infections (HAIs) and bacteria that have become resistant to antibiotics (“superbugs”) are a concern for U.S. FDA. These ongoing incidents...
Technology Leaders: Test & Measurement
PVC and polyurethane are thermoplastic materials that can be formed into a variety of shapes, including tubing and reinforced hose. Both materials are useful in numerous applications. But depending...
Briefs: Medical
Intravenous Fluid Generation System
The ability to stabilize and treat patients on exploration missions will depend on access to needed consumables. Intravenous (IV) fluids have been identified as required consumables. A review of the Space Medicine Exploration Medical Condition List (SMEMCL) lists over 400 medical conditions that could present...
Briefs: Medical
Portable Intravenous Fluid Production Device for Ground Use
There are several medical conditions that require intravenous (IV) fluids. Limitations of mass, volume, storage space, shelf-life, transportation, and local resources can restrict the availability of such important fluids. These limitations are expected in long-duration space...
Mission Accomplished: Medical
Argonide Corporation, a company focused on the research, production, and marketing of specialty nano-materials, was seeking to develop applications for its NanoCeram® fibers. Only 2 nanometers in...
Mission Accomplished: Medical
Going to the dentist is always a less-than-welcome experience. However, a water purification technology developed for NASA could lead to a more satisfying end result and cleaner teeth.
Briefs: Medical
Microwave Sterilization and Depyrogenation System
A fully functional, microgravity-compatible microwave sterilization and depyrogenation system (MSDS) prototype was developed that is capable of producing medical-grade water (MGW) without expendable supplies, using NASA potable water that currently is available aboard the International Space...
Mission Accomplished: Medical
Water is highly prized in the unforgiving realm of space travel and habitation. Ample water reserves for drinking, food preparation, and bathing would take up an inordinate amount of...
Briefs: Electronics & Computers
Nano-Pervaporation Membrane With Heat Exchanger Generates Medical-Grade Water
A nanoporous membrane is used for the pervaporation process in which potable water is maintained, at atmospheric pressure, on the feed side of the membrane. The water enters the non- pervaporation (NPV) membrane device where it is separated into two streams —...
Briefs: Medical
The designed benchtop technique is primed to detect bacteria and viruses from antigenic surface marker proteins in solutions, initially water. This inclusive...
Top Stories
Quiz: Sensors/Data Acquisition
Medical Devices in the Locker Room
INSIDER: Medical
AI Tool Predicts Onset of Parkinson’s Disease
INSIDER: Medical
ECG Patch Paves Way for Sustainable Wearables
INSIDER: Materials
Graphene ‘Tattoo’ Treats Cardiac Arrhythmia with Light
News: Medical
MMT Acquires Ward Automation Galway, Somex: Launches MMT Automation...
Features: Medical
Ask the Expert
Dan Sanchez on How to Improve Extruded Components
Improving extruded components requires careful attention to a number of factors, including dimensional tolerance, material selection, and processing. Trelleborg’s Dan Sanchez provides detailed insights into each of these considerations to help you advance your device innovations while reducing costs and speeding time to market.
Webcasts
Webinars: Medical
5 Ways to Test Wearable Devices
Webinars: Test & Measurement
Powering Medical Devices: How to Filter Noise Out While Keeping Safety In
Webinars: Materials
High-purity Silicone Adhesive Solutions for Medical Device Assembly
Podcasts: Wearables
Here's an Idea: Real-Time Remote Heart Monitoring
Tech Talks: Materials
A Look Into New Silicone Elastomers for Low-Temperature Biopharma Applications
On-Demand Webinars: Manufacturing & Prototyping
Inside Story
Rapid Precision Prototyping Program Speeds Medtech Product Development
Rapid prototyping technologies play an important role in supporting new product development (NPD) by companies that are working to bring novel and innovative products to market. But in advanced industries where products often make use of multiple technologies, and where meeting a part’s exacting tolerances is essential, speed without precision is rarely enough. In such advanced manufacturing—including the medical device and surgical robotics industries — the ability to produce high-precision prototypes early in the development cycle can be critical for meeting design expectations and bringing finished products to market efficiently.
Trending Stories
Features: Packaging & Sterilization
Sterilization, Packaging, and Materials: CRITICAL CONSIDERATIONS