Cellulose nanofibrils have properties that can improve the characteristics of bio-based 3D printing pastes. VTT Technical Research Centre of Finland is developing a 3D wound care product for monitoring wound conditions in hospitals.
3D printing has proven to be an efficient manufacturing method for complex, customized, and light structures. In addition to thermoplastics, 3D printing materials include metals, ceramics, and foodstuffs. The range of biomaterials in 3D paste printing is still fairly limited, since pastes pose unique challenges: their structure must not collapse during printing and the objects manufactured must remain sufficiently strong, rigid, or flexible after drying. In 3D biomaterial filaments, however, commercial products already exist.
Cellulose nanofibrils offer an opportunity for developing durable, bio-based commercial 3D printing materials. They offer an alternative to the currently used chemicals, such as resins, synthetic thickeners, strengtheners, and plastics, the use of which might generate harmful emissions and even allergizing compounds.
3D Technology in Wound Care
Nanocellulose is an attractive option for medical applications, such as for use as a carrier of drug molecules. VTT is currently developing a solution where a protein attached to a 3D printed adhesive bandage can help to promote the growth of skin cells around a wound. The purpose is to have the healed wound area remain flexible instead of it developing stiff scar tissue. The product was development in collaboration with the University of Tampere and funded by The Academy of Finland under the BioDisp3D programme. The same materials development process can also be used in the cosmetics industry or in the manufacture of artificial bone, for example.
“By using nanocellulose, we have succeeded in creating 3D structures that absorb liquids three times more efficiently than the compared alginate fiber dressings commonly used in wound care,” says Panu Lahtinen, VTT senior scientist.
VTT's wound care prototype combines nanocellulose, a protein used in wound care, and printed electronics measuring wound healing into a single product. The measurement electrodes were printed with silver ink onto a film made of polyurethane-nanocellulose, with the electrodes providing connection points for the wireless FlexNode reader developed at VTT.
The electrodes are protected by another laminated layer of the film. On top of this lamination lies a 3D printed wound care gel containing nanocellulose, alginate, and glycerol as the active ingredients. The FlexNode reader wirelessly transmits temperature or bioimpedance data from the wound to a computer used by the healthcare team. The reader can be connected to the wound and attached to the patient with gauze.
Nanocellulose has not yet been approved for medical use, which means that it will take several years before this application is used in hospitals.
Cellulose nanofibrils (CNF) are suitable for 3D printing pastes thanks to their mechanical strength, effects on viscosity, and biodegradability. In particular, CNFs can be used for improving the rigidity of 3D structures. The way the fibrils are cross-linked affects the properties of the structure: moisture tolerance, rigidity, and flexibility.
Due to the excellent water absorption capacity of CNFs, printing pastes can be made viscous enough for the 3D printing process. A 3D printing paste can contain up to 50 percent of water without the paste running during printing.
VTT has used CNFs to develop flexible, rigid, and porous structures. Manufacturing a flexible structure out of bio-based materials is challenging, since the object tends to harden and become more rigid as it dries.
For more information, visit here .