Researchers have developed an ultra-thin, ultra-flexible electronic material that could be printed and rolled out like newspaper. The material could be used for the touch-screens of the future. The touch-responsive technology is 100 times thinner than existing touchscreen materials and so pliable it can be rolled up like a tube.

To create the new conductive sheet, an RMIT University-led team used a thin film common in mobile phone touchscreens and shrunk it from 3D to 2D, using liquid metal chemistry.

The nanothin sheets are readily compatible with existing electronic technologies and because of their incredible flexibility, could potentially be manufactured through roll-to-roll (R2R) processing just like a newspaper.

The research, with collaborators from UNSW, Monash University, and the ARC Centre of Excellence in Future Low-Energy Electronics Technologies (FLEET), was published in the journal Nature Electronics.1

Lead researcher Dr. Torben Daeneke says most mobile phone touchscreens were made of a transparent material, indium-tin oxide, that was very conductive but also very brittle.

“We’ve taken an old material and transformed it from the inside to create a new version that’s supremely thin and flexible,” says Daeneke, an Australian Research Council DECRA Fellow at RMIT.

“You can bend it, you can twist it, and you could make it far more cheaply and efficiently than the slow and expensive way that we currently manufacture touchscreens. Turning it two-dimensional also makes it more transparent, so it lets through more light,” he says. “This means a mobile phone with a touchscreen made of our material would use less power, extending the battery life by roughly 10 percent.”

Thick and Thin: How to Turn an Old Material New

Researchers Dr. Robi Datta, Dr. Torben Daeneke, and Dr. Nitu Syed.

To create the new type of atomically-thin indium-tin oxide (ITO), the researchers used a liquid metal printing approach. An indium-tin alloy is heated to 200 °C, where it becomes liquid, and then rolled over a surface to print off nano-thin sheets of indium tin oxide.

These 2D nanothin sheets have the same chemical makeup as standard ITO but a different crystal structure, giving them exciting new mechanical and optical properties.

As well as being fully flexible, the new type of ITO absorbs just 0.7 percent of light, compared with the 5–10 percent of standard conductive glass. To make it more electronically conductive, you just add more layers.

It’s a pioneering approach that cracks a challenge that was considered unsolvable, Daeneke says.

“There’s no other way of making this fully flexible, conductive and transparent material aside from our new liquid metal method,” he says. “It was impossible up to now — people just assumed that it couldn’t be done.”

Patent Pending: Bringing the Tech to Market

The research team have now used the new material to create a working touchscreen, as a proof-of-concept, and have applied for a patent for the technology. The material could also be used in many other optoelectronic applications, such as LEDs and touch displays, as well as potentially in future solar cells and smart windows.

“We’re excited to be at the stage now where we can explore commercial collaboration opportunities and work with the relevant industries to bring this technology to market,” Daeneke says.

The researchers acknowledge the support of the RMIT Microscopy and Microanalysis Facility (RMMF) and MicroNano Research Facility (MNRF), the National Computational Infrastructure National Facility, the Pawsey Supercomputer Centre and the Melbourne Centre for Nanofabrication (MCN) in the Victorian Node of the Australian National Fabrication Facility (ANFF).

This article was written by Gosia Kaszubska, RMIT University. For more information, visit here .