A flexible semiconductive metal-organic framework was incorporated into a prototype wearable x-ray detector for radiation monitoring and imaging. (Credit: Adapted from Nano Letters 2021, DOI: 10.1021/acs.nanolett.1c02336)

Researchers have developed a proof-of-concept wearable x-ray detector prepared from nontoxic metal-organic frameworks (MOFs) layered between flexible plastic and gold electrodes for high-sensitivity sensing and imaging.

Previous researchers have used MOFs for flexible radiation detectors because they are semiconducting materials that respond to electromagnetic radiation by creating an electrical current. However, some of these MOFs still include lead, just like the x-ray detectors that are currently in use. They wanted to create a heavy-metal-free MOF for a flexible x-ray detector and imager.

The researchers mixed a solution of nickel chloride salt and 2,5-diaminobenzene-1,4-dithiol (DABDT) for several hours, creating a MOF in which nickel linked the DABDT molecules. In initial tests, the nickel-containing MOF was more sensitive than recently reported detectors when irradiated with 20 keV x-rays, equivalent to the energy released during medical diagnostic imaging. Then, to make a flexible x-ray radiation detector, the team sandwiched the nickel-containing MOF between gold film electrodes, one of which was on a flexible plastic surface. They used copper wires to transmit current from each pixel of a 12 × 12 array and covered the whole device with a silicone-based flexible polymer.

Finally, they placed an aluminum letter “H” on the detector and irradiated it with x-rays, measuring a much lower current output underneath the H than under the unimpeded material. The researchers say that their proof-of-concept device is promising for the next generation of radiology imaging equipment and radiation detection when wearable or flexible devices are needed.

Source