Proportional Control

Clippard, Cincinnati, OH, has released a new high-press proportional control that provides a pressure range of 0–500 psig. The Cordis HP500 uses a microcontroller, integrated pressure sensor, and two electronic valves. The inlet valve is connected to the moderately regulated supply pressure, and the exhaust valve is connected to a port that vents excess pressure to atmosphere. Once a command is increased, the inlet valve opens up to allow supply pressure to pass over the sensor element, which provides an active feedback for the microcontroller to satisfy the set point in the process. If at any point the sensor detects a value higher than the set point, the exhaust valve will modulate open to vent off the excess pressure.

For Free Info Visit Here 


Modular Connectors

Weidmuller, Richmond, VA, has extended its line of modular connectors. The RockStar® ModuPlug modular plug-in connector system includes a full range of RJ45 inserts and special slimline CAT 6 patch cords. A gender changer is available in addition to some field-attachable connector modules coded EIA/TIA T568 A, B, and Profinet, using either IDC and crimp connection technology. The pneumatics have two-pole and three-pole versions. Four contact sizes include 1.6, 3, 4, and 6.

For Free Info Visit Here 


Power Supply

A series of compact, high-efficiency power supplies is available in open frame or a range of enclosed formats from XP Power, Singapore. Delivering 250 W when convection cooled and the full 450 W when force cooled, or when using the enclosed versions with an integral fan, the ECH450 series offers class B conducted and radiated emissions and carries worldwide ITE and medical approvals. They operate at full rated power at ambient temperatures up to +50 °C without derating — and at half power at +70 °C ambient. Peak load applications are supported up to 450 W with convection cooling with average power up to 250 W.

For Free Info Visit Here 


Bioprocessing Components

Qosina, Ronkonkoma, NY, offers a broad selection of in-stock, single-use bioprocessing components. The company provides 3D CAD models and comprehensive technical specifications, such as material safety data sheets, technical data sheets, material certification, and compatibility information on most of these products.

Single-use components include tubing, sanitary couplings, bag ports, aseptic connectors, and more. Brands include CPC AseptiQuik, Pharmafluor, PharmaLok, BioValve, BioClamp, and BioEnd Cap.

For Free Info Visit Here 


Medical Design Briefs Magazine

This article first appeared in the October, 2020 issue of Medical Design Briefs Magazine.

Read more articles from this issue here.

Read more articles from the archives here.