University of the Basque Country
Leioa, Spain
www.ehu.eus/en

Hydrogels with electrical and antibacterial properties suitable for neural interfaces have been created at the UPV/EHU-University of the Basque Country. The Materials + Technology research group at the UPV/EHU’s Faculty of Engineering – Gipuzkoa has, in collaboration with the University of Strasbourg, developed hydrogels with potential biomedical applications. Starch was used as the raw material and a three-dimensional network structure was produced. When graphene and salvia extracts were added, the hydrogel was provided with electrical properties as well as the necessary antibacterial ones.

Hydrogels are physical and chemical polymer networks capable of retaining large quantities of liquid in aqueous conditions without losing their dimensional stability. They are used in a whole host of applications and when various components are added to them, they acquire specific properties such as electrical conductivity. This was the path followed by the Materials + Technology research group in the Department of Chemical Engineering and Environment of the UPV/EHU’s Faculty of Engineering – Gipuzkoa. For its hydrogel, the group selected a biopolymer that had not been used previously for applications of this type: starch.

Industrial chemical engineer Kizkitza Gonzalez-Munduate belongs to the Materials + Technology research group in the Department of Chemical Engineering and the Environment of the UPV/EHU’s Faculty of Engineering – Gipuzkoa. (Credit: UPV/EHU)

“One of our lines of research focuses on starch and we regard it as having biological, and physical and chemical properties suitable for producing hydrogels,” says Kizkitza Gonzalez-Munduate, an industrial chemical engineer and member of the group.

Creating the Hydrogel

When creating the hydrogel, they took its use in neural interfaces into consideration; in other words, the components responsible for the electrical connection in implants that interact with the nervous system.

“Due to the fact that the traditional electrodes of neural interfaces made of platinum or gold, for example, are rigid, they require conductive polymer coatings to bring their flexibility closer to that of neural tissue. Right now, however, smaller devices are being called for and also ones that offer better mechanical, electrical and biological properties,” she explains.

The hydrogels developed “address these demands very well,” says Gonzalez. To provide the hydrogel with electrical conductivity, they resorted to graphene, “a material of great interest. It provides electrical properties that are highly suited to the hydrogel, but this also has a drawback: it is not easily stabilized in water,” she says. “We used extracts of salvia to overcome this obstacle and to render the graphene stable in an aqueous medium. These extracts also make the hydrogel even more suitable, if that is possible, for use in medicine as it also has antimicrobial and anti-inflammatory properties,” she adds.

Another of the distinctive features of this research was the use of so-called click chemistry to produce the hydrogel. “It is a strategy that in recent years has been grabbing the attention of the scientific community, because, unlike other means of synthesis, click chemistry does not tend to use catalysts in the reactions; in addition, no by-products are generated, and they are high-performance reactions,” says Gonzalez.

Although this product was designed for a very specific application, she recognizes that this product of bioengineering has a long way to go until it can be used in patients. “It was a piece of research at an initial level focusing on the engineering side relating to the material. Now, the various levels will have to be overcome, and the corresponding tests designed.”

Kizkitza Gonzalez-Munduate is currently writing her PhD thesis under the supervision of Dr. Nagore Gabilondo and Dr Arantxa Eceiza. It was during a stay at the University of Strasbourg that the opportunity for the two universities to collaborate emerged, specifically with the BioTeam research group at the French university led by Dr Luc Avérous.


Medical Design Briefs Magazine

This article first appeared in the January, 2019 issue of Medical Design Briefs Magazine.

Read more articles from this issue here.

Read more articles from the archives here.