Imperial College London, London, UK
A new system to allow specialists to image difficult areas of the body, which could potentially improve the way procedures such as knee replacement surgery are carried out, is being developed by researchers at Imperial College London.
A team of mechanical engineers are making a new type of compact, low cost magnetic resonance imaging (MRI) system for use in hospitals that could improve the way that joints, including knees and elbows are scanned. The new system could help doctors to make more informed decisions about surgery, which could improve outcomes and recovery times for patients.
The researchers say that the finished MRI instrument will be much smaller than standard devices currently in use (See Figure 1). They estimate that their finished device will be about the size of a coffee table, fitting neatly around the knee. Standard hospital MRI machines are currently the size of a small car and cost around £900,000—a significant portion of which pays for installation. The new machines will be cheaper to manufacture, costing only about £200,000. Since the new MRI device will be much smaller, they say that the power requirements will be much lower as well, meaning that installation costs could be minimal.
Each year the National Health Service, the publicly funded healthcare systems in the UK, conducts more than 70,000 knee replacement surgeries. However, it is difficult for doctors to image parts of the body that have high collagen content, such as ligaments and tendons in knees and elbows, using standard MRI technology. Since ligaments inside the knee cannot be imaged in enough detail to be sure of how robust they are, doctors often opt for a full replacement to ensure the end result is a working knee. This can increase healthcare costs and impact patient recovery times.
What Makes It Different?
Dr. Mihailo Ristic, of the Department of Mechanical Engineering, is leading the group in developing the new system. He says: “Standard MRI machines use a cylindrical magnet that tightly encloses the patient. This prevents doctors from positioning body parts at different angles when patients are in the machine. If doctors were able to achieve a specific angle between the body parts and the magnetic field then the MRI signal strength can be increased by up to 50 times when imaging hard to see ligaments and tendons. This is known as the ‘magic angle’ effect, and occurs only when the magnet and tissue structures are positioned at exactly 54.7 degrees to one another. Under these conditions the hydrogen atoms in the body’s tissues provide a significantly enhanced MRI signal. That means the ligaments and tendons—which would otherwise appear black in the scan—can be seen clearly.” (See Figure 2)
Some modern MRI machines use horseshoe shaped magnets instead of cylindrical ones, and offer a much less claustrophobic experience for the patient. But they still aren’t designed to make use of the ‘magic angle’ effect. Funding from the National Institute for Health Research will allow the team to work on designing a new magnet that will be quite unlike the more conventional horseshoe shaped or cylindrical designs. The magnet will be moveable and the field it produces will be oriented at various angles to the patient’s body.
The first year of the project, which runs for three years, will be spent perfecting the magnet design, using software developed by the Ristic research group. By the end of the project, the Imperial scientists aim to collaborate with industrial partners to produce a commercial product.
The system will be designed specifically for knees, but this approach could also be used to image a wide variety of body parts. Dr Ristic concludes: “The potential for this technology is tremendous. We believe that every hospital would want to have one.”