Purdue researcher Sunghwan Lee and his research team are developing breathable health-monitoring sensors that can be embedded directly into wearable fabric gloves. In this prototype, sensor strips are embedded in the fabric above the knuckles and on the wrist below the palm. Researchers use the robot arm to mimic everyday activities and object manipulation with tactile sensors. (Credit: Purdue University photo/John O’Malley)

A patent-pending method developed by Purdue University researchers brings the public one step closer to clothes with wearable electronics that don’t affect the wearer’s comfort. The method also simplifies the manufacturing process and boosts sensing capability.

Using a robotic hand, Jinwook Baek (left), postdoctoral research assistant, and Sunghwan Lee, assistant professor of engineering technology at Purdue, examine how a flexible and wearable sensor could be used to monitor health information and manipulate a small object. (Credit: Purdue University photo/John O’Malley)

Wearable electronics that monitor bio-information like blood pressure, body temperature, and respiratory patterns have become prominent in research. Traditional wearable devices such as health-monitoring systems, however, are hard and inflexible, which makes them difficult to wear for extended periods of time.

Furthermore, fabricating wearable sensors onto clothing creates different sets of problems, says Sunghwan Lee, assistant professor of engineering technology in the Purdue Polytechnic Institute. Traditional sensors eliminate fabric breathability, or the circulation of air from the inside to the outside. Breathability allows vapor moisture to diffuse, which prevents people from overheating and keeps them comfortable.

“This is significant especially when sensors have military or medical assistive rehabilitation applications,” Lee says. “People need to wear these electronics for long periods of time. It isn’t convenient to replace them in the middle of a rehab session or military exercise.

“These limitations are caused by the traditional method to fabricate sensors on clothing. It relies on either brittle and inflexible inorganic materials, which lack longer-cycle stability, or liquid-phase processing, which is unable to create conformal coating on fabrics and hence makes it difficult to secure the required breathability.”

Lee and his team have used a technique called oxidative chemical vapor deposition, or oCVD, to form highly conducting and mechanically flexible polymer films conformally coated on every thread of fabric. It controls the thickness of the polymer layer, called PEDOT, while maintaining the fabric’s breathability and flexibility.

Lee and his team demonstrated the method by directly depositing and patterning the PEDOT layer on commercially available disposable gloves and masks to create blood pressure- and respiratory rate-monitoring sensors. The team confirmed the mechanical flexibility of the conformally vapor-printed PEDOT layer through cyclic bending tests on fabric samples coated with various thicknesses of the films at different temperatures.

“Samples were bent 180 degrees to generate high stress and strain on the fabrics. Their electrical conductivity was measured every cycle,” Lee says. “The deposited layer was shown to maintain its conductive performance consistently for more than 100 bending cycles. This exemplifies excellent mechanical flexibility and resilience to bending and strain that typical wearable fabrics undergo.”

A breathability test determined that the fabric’s air permeability was not compromised by the coated PEDOT film. There was a negligible difference in breathability between bare fabric and an oCVD PEDOT-coated fabric; there also was no clear difference between oCVD PEDOT-coated fabrics of varying thicknesses.

“This consistent high breathability indicates the enhanced versatility of oCVD PEDOT for wearable devices, as film thickness can be adjusted per application without having to consider the effect on breathability,” Lee says.

A manuscript about Lee’s research was published in the journal Science Advances. He disclosed the innovation to the Purdue Research Foundation Office of Technology Commercialization, which has applied for patent protection on the intellectual property. Lee says the next steps to develop the process are packaging and pairing through Bluetooth to wirelessly monitor health information during everyday activities without a medical expert’s assistance. Lee’s research was supported by the Purdue Polytechnic Institute’s Realizing the Digital Enterprise program.

This article was written Steve Martin, Purdue University. For more information, contact Sunghwan Lee at This email address is being protected from spambots. You need JavaScript enabled to view it. or visit here . Industry partners interested in further developing the technology should contact Will Buchanan, This email address is being protected from spambots. You need JavaScript enabled to view it., about 2021-LEE-69500.