Researchers have developed new x-ray optics that can be used to harness extremely fast pulses in a package that is significantly smaller and lighter than conventional devices used to modulate x-rays. The new optics are based on microscopic chip-based devices known as microelectromechanical systems (MEMS).
“Our new ultrafast optics-on-a-chip is poised to enable x-ray research and applications that could have a broad impact on understanding fast-evolving chemical, material, and biological processes,” says research team leader Jin Wang from the U.S Department of Energy’s Argonne National Laboratory. “This could aid in the development of more efficient solar cells and batteries, advanced computer storage materials and devices, and more effective drugs for fighting diseases.”
In The Optical Society (OSA) journal Optics Express, the researchers demonstrated their new x-ray optics-on-a-chip device, which measures about 250 μm and weighs just 3 μg, using the x-ray source at Argonne’s Advanced Photon Source synchrotron. The tiny device performed 100–1,000 times faster than conventional x-ray optics, which tend to be bulky.
“Although we demonstrated the device in a large x-ray synchrotron facility, when fully developed, it could be used with conventional x-ray generators found in scientific labs or hospitals,” says Wang. “The same technology could also be used to develop other devices such as precise dosage-delivery systems for radiation therapy or fast x-ray scanners for nondestructive diagnostics.”
Capturing Fast Processes
X-rays can be used to capture very fast processes such as chemical reactions or the quickly changing dynamics of biological molecules. However, this requires an extremely high-speed camera with a fast shutter speed. Because many materials that are opaque to light are transparent to x-rays it can be difficult to improve the speed of shutters effective for x-rays.
To solve this challenge, the research team, consisting of scientists from Argonne’s Advanced Photon Source and Center for Nanoscale Materials, turned to MEMS-based devices. “In addition to being used in many of the electronics we use daily, MEMS are also used to manipulate light for high-speed communication,” says Wang. “We wanted to find out if MEMS-based photonic devices can perform similar functions for x-rays as they do with visible or infrared light.”
In the new work, the researchers show that the extremely small size and weight of their MEMS-based shutter allows it to oscillate at speeds equivalent to about one million revolutions per minute (rpm). The researchers leveraged this high speed and the MEMS material’s x-ray diffractive property to create an extremely fast x-ray shutter.
Boosting Shutter Speed
Using their new optics-on-a-chip with x-rays produced by the Advanced Photon Source, the researchers demonstrated that it could provide a stable shutter speed as fast as one nanosecond with an extremely high on/off contrast. This could be used to extract single x-ray pulses from the source, even if the pulses were only 2.8 nanoseconds apart from each other.
“We show that our new chip-based technology can perform functions not possible with conventional large optics,” says Wang. “This can be used to create ultrafast probes for studying fast processes in novel materials.”
The researchers are now working to make the devices more versatile and robust so that they can be used continuously over long periods of time. They are also integrating the peripheral systems used with the tiny chip-based MEMS devices into a deployable stand-alone instrument.
The work was supported by DOE’s Office of Science. The Advanced Photon Source and Center for Nanoscale Materials are DOE Office of Science user facilities.
For more information, visit here .