Worldwide an estimated 185 million people use a wheelchair daily. A company based in Auckland, New Zealand, has developed an innovative robotic technology that helps people with mobility impairment get back on their feet— the Rex Bionics robotic exoskeleton. Its integrated maxon motors help to ensure smooth limb movement.
Hayden Allen is a young man from New Zealand. He has been restricted to a wheelchair ever since a motorcycle accident damaged his spinal cord. Back then, doctors told him that he would never be able to walk again. But that is not the case. Hayden is one of the first users of the Rex robotic exoskeleton. The first time he tested his robotic legs, his friends told him that he should stop looking at this feet. “I simply could not stop staring at my feet moving,” said Hayden as he described his first steps with Rex. (See Figure 1) The robotic legs gave him back a renewed quality of life and new perspectives. Locations that had been previously completely inaccessible were now within reach again. In his profession as a mechanic, he is once again able to perform tasks that require him to stand up, and many new opportunities are available to him in his leisure time.
Around nine years ago, the two founders of Rex Bionics, Richard Little and Robert Irving, had the idea of developing this kind of robotic legs. The reasons were obvious: Robert Irving had already been diagnosed with multiple sclerosis and he knew he will end up in a wheelchair sooner or later. Both of the developers’ mothers are in wheelchairs, thus they knew very well what great obstacles are faced by wheelchair users. The two friends decided to use their know-how as engineers to develop a machine for persons who would usually require a wheelchair to move about. This was the birth of the New Zealand-based company.
Why an Exoskeleton?
Exoskeletons have been developed to help people with mobility impairment to walk. This improves their strength and endurance. Rex gives these persons the ability to stand, walk, get up, turn around, and sit down all by themselves again. Moving sideways, taking the stairs, or walking on hard, flat surfaces with slopes also presents no problems. Even though the bionic legs cannot fully replace the wheelchair, the user is once again able to perform tasks standing up. Even just being able to be on the same eye level with conversation partners again is an unbelievable experience for these people. “We want to reach as many persons as possible on the whole world, by using perfected technology and continuous improvements in functionality, form, and usability. When we see the unbelievably emotional reactions of Rex users, every day brings us joy and that motivates the entire Rex team,” says co-founder Richard Little.
Today Rex Bionics has two manufacturing facilities where they produce two different Rex versions for different needs: “Rex” has been developed for private users who can now perform tasks that are not possible when sitting in a wheelchair. “Rehab Rex” is intended for use in rehabilitation centers.
According to Little, the largest challenge during the development process was the development of the very complex robotic platform, which also had to be very light. Another basic requirement was that the user, with his restricted physical abilities, has to perfectly harmonize with the externally mounted robotic legs and can be able to safely stand and walk.
The exoskeleton itself weighs 84 pounds, but the user does not carry any of this weight. It is operated by means of an integrated, exchangeable battery that gives around two hours of continuous operation. Rex is controlled with a joystick and control pad; other exoskeletons frequently use sensors. A large advantage of the joystick operation is that no movement or nerve functions are required to use the exoskeleton. Able to move approximately three meters per minute, the Rex is not very fast, but the user can move forward very safely. He won’t lose his balance because, regardless of whether it is switched on or off, the exoskeleton always remains stable. Thus, the user can also stand in a crowded environment, like a sports event or a concert, without worrying about being pushed over. Rex does not require the use of supporting aids, such as crutches, which means that the user has full use of his arms and hands.
Ten Strong Motors for Safe Movements
Rex is a highly complex electromechanical device—each exoskeleton has thousands of precision parts, including the limbs that are controlled by a network of 29 microcontrollers. The special arrangement of microcontrollers in Rex makes it possible to move and react within seconds. The movements performed by Rex always feel smooth to the user. Motors made by maxon precision motors are responsible for ensuring that no jerky movements occur. They control all movements of the limbs, which move in the same way as a human leg. Ten DC RE 40 maxon motors are used in each exoskeleton. (See Figure 2)The RE 40 is equipped with powerful 150 W and has an efficiency of more than 90 percent. The mechanically commutated DC motors are characterized by a good torque behavior, high dynamics, a very large speed range, and a long service life. The heart of the motor is the globally patented ironless rotor that ensures detent-free running of the drive.
Rex Bionics chose to use the high-quality maxon motors for a good reason—Rex is a highly sensitive medical product and the safety of its users is of utmost importance. The largest challenge, where the motors are concerned, was uniting quality, size, and power in a single product.
Currently, Rex is being used by nearly 20 persons in New Zealand, with new users joining this group every month. They can all share the feelings of user Mitch Brogan: “My cheeks were aching from my constant smiling and I knew that my life has changed forever.”
This article was written by Anja Schütz, maxon motor ag, Sachseln, Switzerland. For more information on Rex Bionics Ltd, Auckland, New Zealand, visit https://info.htims.com/45608-189.
For more information on maxon precision motors, Fall River, MA, visit https://info.htims.com/45608-163.