Tech Briefs

Biomedical engineers have woven a “smart” fabric that mimics the sophisticated and complex properties the bone tissue periosteum.

For the first time, biomedical engineers have woven a “smart” fabric that mimics the sophisticated and complex properties of one of nature's ingenious materials, the bone tissue periosteum.

Professor Melissa Knothe Tate with her computer-controlled jacquard loom. (Credit: UNSW/Paul Henderson Kelly)

Having achieved proof of concept, the UNSW researchers are now ready to produce fabric prototypes for a range of advanced functional materials that could transform the medical, safety, and transport sectors. Patents for the innovation are pending in Australia, the United States, and Europe.

Potential future medical applications include “intelligent” compression bandages for deep-vein thrombosis that respond to the wearer's movement. The research is published in Nature's Scientific Reports.

Many animal and plant tissues exhibit “smart” and adaptive properties. One such material is the periosteum, a soft tissue sleeve that envelops most bony surfaces in the body. The complex arrangement of collagen, elastin, and other structural proteins gives periosteum amazing resilience and provides bones with added strength under high impact loads.

Until now, a lack of scalable bottom-up approaches (building up from most basic elements) by researchers has stymied their ability to use smart tissues to create advanced functional materials.

Periosteum is a tissue fabric layer on the outside of bone, as seen in the upper diagonal segment of the tissue image volume. The natural weave of elastin (green) and collagen (yellow) are evident when viewed under the microscope. Elastin gives periosteum its stretchy properties and collagen imparts toughness. Muscle is organized into fiber bundles, observed as round structures in the lower diagonal segment of the tissue image volume. The volume is approximately 200 × 200 pm (width × height) × 25 µm deep. (Credit:UNSW/Melissa Knothe Tate)

UNSW's Paul Trainor Chair of Biomedical Engineering, Professor Melissa Knothe Tate says her team had for the first time mapped the complex tissue architectures of the periosteum, visualized them in 3D on a computer, scaled up the key components, and produced prototypes using weaving loom technology.

“The result is a series of textile swatch prototypes that mimic periosteum's smart stress-strain properties. We have also demonstrated the feasibility of using this technique to test other fibers to produce a whole range of new textiles,” Tate says.

To understand the functional capacity of the periosteum, the team used an incredibly high fidelity imaging system to investigate and map its architecture.

“We then tested the feasibility of rendering periosteum's natural tissue weaves using computer-aided design software,” Tate says.

The computer modeling allowed the researchers to scale up nature's architectural patterns to weave periosteum-inspired, multidimensional fabrics using a state-of-the-art computer-controlled jacquard loom. The loom is known as the original rudimentary computer, first unveiled in 1801.

Joanna Ng with the weaver's loom. (Credit: Leilah Schubert/UNSW Media)

“The challenge with using collagen and elastin is their fibers, that are too small to fit into the loom. So, we used elastic material that mimics elastin and silk that mimics collagen,” Tate says.

In a first test of the scaled-up tissue weaving concept, a series of textile swatch prototypes were woven, using specific combinations of collagen and elastin in a twill pattern designed to mirror periosteum's weave. Mechanical testing of the swatches showed that they exhibited similar properties found in periosteum's natural collagen and elastin weave.

First author and biomedical engineering PhD candidate Joanna Ng says the technique had significant implications for the development of next-generation advanced materials and mechanically functional textiles.

While the materials produced by the jacquard loom have potential manufacturing applications, the UNSW team is ultimately focused on the machine's human potential.

“Our longer-term goal is to weave biological tissues — essentially human body parts — in the lab to replace and repair our failing joints that reflect the biology, architecture, and mechanical properties of the periosteum,” Ng says.

An NHMRC development grant received in November 2016 will allow the team to take its research to the next phase. The researchers will work with the US-based Cleveland Clinic and the University of Sydney's Professor Tony Weiss to use the smart technology to develop and commercialize prototype bone implants for preclinical research within three years.

For more information, visit here.